[U-Boot] mx6qp sabreauto hangs after saveenv/reset

[Sinan Akman]

On 08/10/15 12:24 PM, Fabio Estevam wrote:
> Hi Peng,
>
> On a mx6qp sabreauto I noticed that the board hangs after doing:
>
> => saveenv
> => reset
>
> U-Boot 2015.10-rc4-24385-ge04e21c-dirty (Oct 08 2015 - 13:08:54 -0300)
>
> CPU:   Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz)
> CPU:   Automotive temperature grade (-40C to 125C) at 38C
> Reset cause: POR
> Board: MX6Q-Sabreauto revA
> I2C:   ready
> DRAM:  2 GiB
> PMIC:  PFUZE100 ID=0x10
> Flash: 32 MiB
> NAND:
>
> (hangs here)
>
> Any ideas?

   Now, is this before or after our recent reset revert ?

   Regards
   Sinan Akman