[U-Boot] [PATCH 1/2] vexpress64: Juno: Declare all 8GB of RAM and make them visible to the kernel.

[Liviu Dudau]

Juno comes with 8GB RAM, but U-Boot only passes 2GB to the kernel.
Declare a secondary memory bank and set the sizes correctly.

Signed-off-by: Liviu Dudau <Liviu.Dudau at foss.arm.com>
---
 board/armltd/vexpress64/vexpress64.c | 8 ++++++++
 include/configs/vexpress_aemv8a.h    | 4 +++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
index 7cb4e00..6df9d60 100644
--- a/board/armltd/vexpress64/vexpress64.c
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -38,6 +38,14 @@ int dram_init(void)
 	return 0;
 }
 
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+}
+
 /*
  * Board specific reset that is system reset.
  */
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 6107c64..f06344a 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -164,11 +164,13 @@
 #define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x10000000)
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_NR_DRAM_BANKS		2
 #define PHYS_SDRAM_1			(V2M_BASE)	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_2			(0x880000000)
 /* Top 16MB reserved for secure world use */
 #define DRAM_SEC_SIZE		0x01000000
 #define PHYS_SDRAM_1_SIZE	0x80000000 - DRAM_SEC_SIZE
+#define PHYS_SDRAM_2_SIZE	0x180000000
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
 
 /* Enable memtest */
-- 
2.6.0