[U-Boot] [PATCH] nios2: convert cache flush to use dm cpu data

[Marek Vasut]

On Friday, October 09, 2015 at 04:49:03 AM, Ley Foon Tan wrote:
> On Fri, Oct 9, 2015 at 5:39 AM, Marek Vasut <marex at denx.de> wrote:
> >> +
> >> +DECLARE_GLOBAL_DATA_PTR;
> >> +
> >> +static void __flush_dcache_all(unsigned long start, unsigned long end)
> >> +{
> >> +     unsigned long addr;
> >> +
> >> +     start &= ~(gd->arch.dcache_line_size - 1);
> > 
> > I'd suggest to use GENMASK() here, but I don't think we picked this from
> > Linux just yet.
> > 
> >> +     end += (gd->arch.dcache_line_size - 1);
> >> +     end &= ~(gd->arch.dcache_line_size - 1);
> > 
> > Is this an attempt at poor-mans' rounding ? I think you want to implment
> > something like arch/arm/cpu/arm926ejs/cache.c check_cache_range() and NOT
> > do any rounding here. The reason for that is that if you do rounding, you
> > might accidentally corrupt a piece of memory which was just delivered via
> > DMA before you did the flush.
> 
> The code above is to convert the address to dcache line size.

So it's aligning the unaligned accesses, correct?

> arch/arm/cpu/arm926ejs/cache.c check_cache_range() will skip the cache
> flushing if it is unaligned to cache line size.

That's right, unaligned cache flushes/invalidations should not happen, ever.

> I'm not sure how
> frequent U-boot access to non-aligned cache line size.

They must not ever happen, if some driver does them, the driver needs to be
fixed.

Best regards,
Marek Vasut