[U-Boot] [PATCH] T104xD4RDB: Fix PHY address for PHY connected to FM1 at DTSEC3

Codrin Ciubotariu codrin.ciubotariu at freescale.com
Mon Oct 12 15:33:13 CEST 2015


On T1040D4RDB board, u-boot fails to connect port FM1 at DTSEC3 to
the Ethernet PHY because the wrong PHY address is used. Also,
T1040D4RDB supports SGMII on one port only.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at freescale.com>
---
 include/configs/T104xRDB.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 5b61b56..e872507 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -742,7 +742,9 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #ifdef CONFIG_FMAN_ENET
 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
-#elif defined(CONFIG_T1040D4RDB) || defined(CONFIG_T1042D4RDB)
+#elif defined(CONFIG_T1040D4RDB)
+#define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
+#elif defined(CONFIG_T1042D4RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
-- 
1.9.3



More information about the U-Boot mailing list