[U-Boot] [PATCH] ARM: AM335x: mux: change mmc0 cd pinmux from mmc0_sdcd to gpio

[Mugunthan V N]

Currently omap_hsmmc driver doesn't use sdcd pin to detect
whether the card is present or not. Instead the same pin is used
as GPIO to detect card presence. So change the pin mux mode from
mmc0_sdcd to gpio0_6.

Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
---
 board/ti/am335x/mux.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 680f656..e49fa0c 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -65,7 +65,7 @@ static struct module_pin_mux mmc0_pin_mux[] = {
 	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
 	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
 	{OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)},		/* MMC0_WP */
-	{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)},	/* MMC0_CD */
+	{OFFSET(spi0_cs1), (MODE(7) | RXACTIVE | PULLUP_EN)},	/* GPIO0_6 */
 	{-1},
 };
 
-- 
2.6.1.133.gf5b6079