[U-Boot] [PATCH] ls1021atwr: sdboot: change serdes 0x20 to 0x30

[York Sun]

On 09/15/2015 01:12 AM, Yuan Yao wrote:
> For LS1021ATWR board in order to support SATA(Gen 3),
> SerDes Lan B will be connect to SATA directly.
> 
> So SerDes 0x20 can't support 2SGMII at the same time.
> In order to support two SGMII and one RGMII at the same time,
> we used 0x30 to replace 0x20.
> 
> Signed-off-by: Yuan Yao <yao.yuan at freescale.com>
> ---
>  board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg b/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
> index 9c3e3b0..3d40528 100644
> --- a/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
> +++ b/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
> @@ -3,12 +3,12 @@ aa55aa55 01ee0100
>  
>  #enable IFC, disable QSPI and DSPI
>  0608000a 00000000 00000000 00000000
> -20000000 00407900 60040a00 21046000
> -00000000 00000000 00000000 00038000
> +30000000 00407900 60040a00 21046000
> +00000000 00000000 00000000 20038000
>  00080000 881b7340 00000000 00000000
>  
>  #disable IFC, enable QSPI and DSPI
>  #0608000a 00000000 00000000 00000000
> -#20000000 00407900 60040a00 21046000
> -#00000000 00000000 00000000 00038000
> +#30000000 00407900 60040a00 21046000
> +#00000000 00000000 00000000 20038000
>  #20084800 881b7340 00000000 00000000
> 

This patch is superseded by Alison's patch "arm: ls1021a: Add QSPI or IFC
support in SD boot".

York