[U-Boot] [PATCH v4] pci: pcie_imx: Fix hang on mx6qp

Stefano Babic sbabic at denx.de
Thu Oct 15 10:50:00 CEST 2015


On 13/10/2015 16:01, Fabio Estevam wrote:
> PCI driver currently hangs on mx6qp.
> 
> Toggle the reset bit with the appropriate timings to fix the issue.
> 
> Based on the FSL kernel driver implementation.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> Changes since v3:
> - Remove blank line from commit log
> Changes since v2:
> - Remove unneeded blank line (Bin)
> 
>  arch/arm/include/asm/arch-mx6/iomux.h | 2 ++
>  drivers/pci/pcie_imx.c                | 8 ++++++++
>  2 files changed, 10 insertions(+)
> 
> diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h
> index 9b3a91f..907cb40 100644
> --- a/arch/arm/include/asm/arch-mx6/iomux.h
> +++ b/arch/arm/include/asm/arch-mx6/iomux.h
> @@ -18,6 +18,8 @@
>  #define IOMUXC_GPR1_REF_SSP_EN			(1 << 16)
>  #define IOMUXC_GPR1_TEST_POWERDOWN		(1 << 18)
>  
> +#define IOMUXC_GPR1_PCIE_SW_RST		(1 << 29)
> +
>  /*
>   * IOMUXC_GPR5 bit fields
>   */
> diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c
> index 1568f20..f1e189e 100644
> --- a/drivers/pci/pcie_imx.c
> +++ b/drivers/pci/pcie_imx.c
> @@ -19,6 +19,7 @@
>  #include <asm/io.h>
>  #include <linux/sizes.h>
>  #include <errno.h>
> +#include <asm/arch/sys_proto.h>
>  
>  #define PCI_ACCESS_READ  0
>  #define PCI_ACCESS_WRITE 1
> @@ -430,6 +431,10 @@ static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d,
>  static int imx6_pcie_assert_core_reset(void)
>  {
>  	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
> +
> +	if (is_mx6dqp())
> +		setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST);
> +
>  #if defined(CONFIG_MX6SX)
>  	struct gpc *gpc_regs = (struct gpc *)GPC_BASE_ADDR;
>  
> @@ -536,6 +541,9 @@ static int imx6_pcie_deassert_core_reset(void)
>  
>  	enable_pcie_clock();
>  
> +	if (is_mx6dqp())
> +		clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_PCIE_SW_RST);
> +
>  	/*
>  	 * Wait for the clock to settle a bit, when the clock are sourced
>  	 * from the CPU, we need about 30 ms to settle.
> 

Thanks Fabio - as fix, I pick it up for the release.

Acked-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list