[U-Boot] [PATCH v2 4/7] sunxi: Use Kconfig CONFIG_MMC
Maxime Ripard
maxime.ripard at free-electrons.com
Thu Oct 15 22:04:07 CEST 2015
Not all sunxi boards have an MMC embedded. Switching to the Kconfig option
will allow to enable or disable the support in each boards' defconfig.
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
board/sunxi/Kconfig | 4 ++++
drivers/mmc/Kconfig | 2 +-
include/configs/sunxi-common.h | 8 +++++---
3 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index b3367779af9b..f6f2a605eca3 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -227,6 +227,10 @@ config OLD_SUNXI_KERNEL_COMPAT
Set this to enable various workarounds for old kernels, this results in
sub-optimal settings for newer kernels, only enable if needed.
+config MMC
+ depends on !UART0_PORT_F
+ default y if ARCH_SUNXI
+
config MMC0_CD_PIN
string "Card detect pin for mmc0"
default ""
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index d3d7d911e484..ceae7bcaec6a 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -2,7 +2,7 @@ menu "MMC Host controller Support"
config MMC
bool "Enable MMC support"
- depends on UNUSED
+ depends on ARCH_SUNXI
help
TODO: Move all architectures to use this option
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 879d0f42385f..dd314468be45 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -140,8 +140,7 @@
#endif
/* mmc config */
-#if !defined(CONFIG_UART0_PORT_F)
-#define CONFIG_MMC
+#if defined(CONFIG_MMC)
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_MMC
#define CONFIG_MMC_SUNXI
@@ -197,7 +196,7 @@
#define CONFIG_SPL_LIBDISK_SUPPORT
-#if !defined(CONFIG_UART0_PORT_F)
+#if defined(CONFIG_MMC)
#define CONFIG_SPL_MMC_SUPPORT
#endif
@@ -354,9 +353,12 @@ extern int soft_i2c_gpio_scl;
#define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
#define CONFIG_FASTBOOT_FLASH
+
+#ifdef CONFIG_MMC
#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
#define CONFIG_EFI_PARTITION
#endif
+#endif
#ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_CMD_USB_MASS_STORAGE
--
2.5.3
More information about the U-Boot
mailing list