[U-Boot] [Patch V5 12/17] armv8/fsl_lsch2: Add fsl_lsch2 SoC
Gong Q.Y.
Qianyu.Gong at freescale.com
Fri Oct 16 12:17:46 CEST 2015
> -----Original Message-----
> From: Prabhakar [mailto:prabhakar at freescale.com]
> Sent: Friday, October 16, 2015 2:28 PM
> To: Gong Qianyu-B52263; u-boot at lists.denx.de
> Cc: Hu Mingkai-B21284; Sun York-R58495; Hou Zhiqiang-B48286; Xie Shaohui-
> B21989; Song Wenbin-B53747; Wood Scott-B07421; Wang Huan-B18965; Li Yang-
> Leo-R58472
> Subject: Re: [Patch V5 12/17] armv8/fsl_lsch2: Add fsl_lsch2 SoC
>
>
>
> On 10/15/2015 6:32 PM, Gong Qianyu wrote:
> > From: Mingkai Hu <Mingkai.Hu at freescale.com>
> >
> > Freescale LayerScape with Chassis Generation 2 is a set of SoCs with
> > ARMv8 cores and 2rd generation of Chassis.
> >
> > Signed-off-by: Li Yang <leoli at freescale.com>
> > Signed-off-by: Hou Zhiqiang <B48286 at freescale.com>
> > Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
> > Signed-off-by: Gong Qianyu <Qianyu.Gong at freescale.com>
> > ---
> > V5:
> > - Move LS1043A ddr macros out of soc #ifdef.
> > - Move macros and structs from cpu.c to cpu.h.
> > - Wrap le32 and be32 functions for ccsr gur and scfg. Defined in
> soc.h
> > - Modify fsl-layerscape/Makefile.
> > V4:
> > - Add fsl_lsch2 to fsl-layerscape framework.
> > V3:
> > - Update MMU table initialization to match the latest code.
> > - Remove some dead code
> > - Rename #include<asm/arch-fsl-lsch2/xxx> to #include<asm/arch/xxx>
> > V2:
> > - remove FSL_LS102xA_DEVDISR3_PCIE from immap_lsch2.h
> >
> > arch/arm/cpu/armv8/fsl-layerscape/Makefile | 5 +
> > arch/arm/cpu/armv8/fsl-layerscape/README.lsch2 | 10 +
> > arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 13 +
> > .../cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c | 117 +++++
> > .../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 137 +++++
> > arch/arm/cpu/armv8/fsl-layerscape/soc.c | 17 +
> > arch/arm/include/asm/arch-fsl-layerscape/config.h | 40 ++
> > arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 64 +++
> > .../include/asm/arch-fsl-layerscape/fsl_serdes.h | 91 ++++
> > .../include/asm/arch-fsl-layerscape/immap_lsch2.h | 555
> +++++++++++++++++++++
> > .../include/asm/arch-fsl-layerscape/ns_access.h | 158 ++++++
> > arch/arm/include/asm/arch-fsl-layerscape/soc.h | 6 +
> > arch/arm/include/asm/armv8/mmu.h | 1 +
> > include/common.h | 3 +
> > 14 files changed, 1217 insertions(+)
> >
> > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> > b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> > index 73e48a7..637853d 100644
> > --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> > +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> > @@ -76,6 +76,23 @@ void fsl_lsch3_early_init_f(void)
> > init_early_memctl_regs(); /* tighten IFC timing */
> > erratum_a009203();
> > }
> > +
> > +#elif defined(CONFIG_LS1043A)
> > +void fsl_lsch2_early_init_f(void)
> > +{
> > + struct ccsr_cci400 *cci = (struct ccsr_cci400
> > +*)CONFIG_SYS_CCI400_ADDR;
> > +
> LS1088A CCI-400, will it be possible to have this code out of chassis
> code
>
Maybe reconsolidate the code after LS1088A joins us.
Create a cci_400.c or something to contain the common code.
For the moment, we have no plan to fix it.
> > +#ifdef CONFIG_FSL_IFC
> > + init_early_memctl_regs(); /* tighten IFC timing */
> > +#endif
> > +
> > + /*
> > + * Enable snoop requests and DVM message requests for
> > + * Slave insterface S4 (A53 core cluster)
> > + */
> > + out_le32(&cci->slave[4].snoop_ctrl,
> > + CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN); }
> > #endif
> >
> > #ifdef CONFIG_BOARD_LATE_INIT
> > diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> > b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> > new file mode 100644
> > index 0000000..d941437
> > --- /dev/null
> > +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
> > @@ -0,0 +1,555 @@
> > +/*
> > + * Copyright 2013-2015 Freescale Semiconductor, Inc.
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
> > + */
> > +
> > +#ifndef __ARCH_FSL_LSCH2_IMMAP_H__
> > +#define __ARCH_FSL_LSCH2_IMMAP_H__
> > +
> > +#include <fsl_immap.h>
> > +
> > +#define CONFIG_SYS_IMMR 0x01000000
> > +#define CONFIG_SYS_DCSRBAR 0x20000000
> > +#define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR +
> 0x00220000)
> > +
> > +#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR +
> 0x00080000)
> > +#define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR +
> 0x00180000)
> > +#define CONFIG_SYS_GIC400_ADDR (CONFIG_SYS_IMMR +
> 0x00400000)
> > +#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR +
> 0x00530000)
> > +#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR +
> 0x00560000)
> > +#define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR +
> 0x00510000)
> > +#define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
> > +#define CONFIG_SYS_FSL_RST_ADDR (CONFIG_SYS_IMMR +
> 0x00ee00b0)
> > +#define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000)
> > +#define CONFIG_SYS_FSL_FMAN_ADDR (CONFIG_SYS_IMMR + 0x00a00000)
> > +#define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR +
> 0x00ea0000)
> > +#define CONFIG_SYS_FSL_DCFG_ADDR (CONFIG_SYS_IMMR + 0x00ee0000)
> > +#define CONFIG_SYS_FSL_CLK_ADDR (CONFIG_SYS_IMMR +
> 0x00ee1000)
> > +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR +
> 0x011c0500)
> > +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR +
> 0x011c0600)
> > +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_IMMR +
> 0x011d0500)
> > +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_IMMR +
> 0x011d0600)
> > +#define CONFIG_SYS_FSL_XHCI_USB1_ADDR (CONFIG_SYS_IMMR +
> 0x01f00000)
> > +#define CONFIG_SYS_FSL_XHCI_USB2_ADDR (CONFIG_SYS_IMMR +
> 0x02000000)
> > +#define CONFIG_SYS_FSL_XHCI_USB3_ADDR (CONFIG_SYS_IMMR +
> 0x02100000)
> > +#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR +
> 0x2400000)
> > +#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR +
> 0x2500000)
> > +#define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR +
> 0x2600000)
> > +#define CONFIG_SYS_FSL_SEC_ADDR (CONFIG_SYS_IMMR +
> 0x700000)
> > +#define CONFIG_SYS_FSL_JR0_ADDR (CONFIG_SYS_IMMR +
> 0x710000)
> > +#define CONFIG_SYS_SNVS_ADDR (CONFIG_SYS_IMMR +
> 0xe90000)
> > +#define CONFIG_SYS_SFP_ADDR (CONFIG_SYS_IMMR +
> 0xe80200)
> > +
> > +#define CONFIG_SYS_FSL_TIMER_ADDR 0x02b00000
> > +
> > +#define I2C1_BASE_ADDR (CONFIG_SYS_IMMR +
> 0x01180000)
> > +#define I2C2_BASE_ADDR (CONFIG_SYS_IMMR +
> 0x01190000)
> > +#define I2C3_BASE_ADDR (CONFIG_SYS_IMMR +
> 0x011a0000)
> > +#define I2C4_BASE_ADDR (CONFIG_SYS_IMMR +
> 0x011b0000)
> > +
> > +#define WDOG1_BASE_ADDR (CONFIG_SYS_IMMR +
> 0x01ad0000)
> > +
> > +#define QSPI0_BASE_ADDR (CONFIG_SYS_IMMR +
> 0x00550000)
> > +#define DSPI1_BASE_ADDR (CONFIG_SYS_IMMR +
> 0x01100000)
> > +
> > +#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
> > +
> > +#define AHCI_BASE_ADDR (CONFIG_SYS_IMMR +
> 0x02200000)
> > +
> > +#define CONFIG_SYS_PCIE1_PHYS_ADDR 0x4000000000ULL
> > +#define CONFIG_SYS_PCIE2_PHYS_ADDR 0x4800000000ULL
> > +#define CONFIG_SYS_PCIE3_PHYS_ADDR 0x5000000000ULL
> > +
> > +/* TZ Address Space Controller Definitions */
> > +#define TZASC1_BASE 0x01100000 /* as per CCSR map. */
> > +#define TZASC2_BASE 0x01110000 /* as per CCSR map. */
> > +#define TZASC3_BASE 0x01120000 /* as per CCSR map. */
> > +#define TZASC4_BASE 0x01130000 /* as per CCSR map. */
> > +#define TZASC_BUILD_CONFIG_REG(x) ((TZASC1_BASE + (x * 0x10000)))
> > +#define TZASC_ACTION_REG(x) ((TZASC1_BASE + (x * 0x10000))
> + 0x004)
> > +#define TZASC_GATE_KEEPER(x) ((TZASC1_BASE + (x * 0x10000))
> + 0x008)
> > +#define TZASC_REGION_BASE_LOW_0(x) ((TZASC1_BASE + (x * 0x10000))
> + 0x100)
> > +#define TZASC_REGION_BASE_HIGH_0(x) ((TZASC1_BASE + (x * 0x10000))
> + 0x104)
> > +#define TZASC_REGION_TOP_LOW_0(x) ((TZASC1_BASE + (x * 0x10000))
> + 0x108)
> > +#define TZASC_REGION_TOP_HIGH_0(x) ((TZASC1_BASE + (x * 0x10000))
> + 0x10C)
> > +#define TZASC_REGION_ATTRIBUTES_0(x) ((TZASC1_BASE + (x * 0x10000))
> + 0x110)
> > +#define TZASC_REGION_ID_ACCESS_0(x) ((TZASC1_BASE + (x * 0x10000))
> + 0x114)
> > +
> > +#define TP_ITYP_AV 0x00000001 /* Initiator available
> */
> > +#define TP_ITYP_TYPE(x) (((x) & 0x6) >> 1) /* Initiator Type */
> > +#define TP_ITYP_TYPE_ARM 0x0
> > +#define TP_ITYP_TYPE_PPC 0x1 /* PowerPC */
> > +#define TP_ITYP_TYPE_OTHER 0x2 /* StarCore DSP */
> > +#define TP_ITYP_TYPE_HA 0x3 /* HW Accelerator */
> > +#define TP_ITYP_THDS(x) (((x) & 0x18) >> 3) /* # threads */
> > +#define TP_ITYP_VER(x) (((x) & 0xe0) >> 5) /* Initiator Version
> */
> > +#define TY_ITYP_VER_A7 0x1
> > +#define TY_ITYP_VER_A53 0x2
> > +#define TY_ITYP_VER_A57 0x3
> > +
> > +#define TP_CLUSTER_EOC 0xc0000000 /* end of clusters */
> > +#define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */
> > +#define TP_INIT_PER_CLUSTER 4
> > +
> > +/*
> > + * Define default values for some CCSR macros to make header files
> > +cleaner*
> > + *
> > + * To completely disable CCSR relocation in a board header file,
> > +define
> > + * CONFIG_SYS_CCSR_DO_NOT_RELOCATE. This will force
> > +CONFIG_SYS_CCSRBAR_PHYS
> > + * to a value that is the same as CONFIG_SYS_CCSRBAR.
> > + */
> > +
> > +#ifdef CONFIG_SYS_CCSRBAR_PHYS
> > +#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly. Use \
> > +CONFIG_SYS_CCSRBAR_PHYS_LOW and/or CONFIG_SYS_CCSRBAR_PHYS_HIGH
> instead."
> > +#endif
> > +
> > +#ifdef CONFIG_SYS_CCSR_DO_NOT_RELOCATE #undef
> > +CONFIG_SYS_CCSRBAR_PHYS_HIGH #undef CONFIG_SYS_CCSRBAR_PHYS_LOW
> > +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0
> > +#endif
> > +
> > +#ifndef CONFIG_SYS_CCSRBAR
> > +#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT
> > +#endif
> > +
> > +#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH
> > +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0
> > +#endif
> > +
> > +#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW
> > +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT
> > +#endif
> > +
> > +#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull)
> << 32 | \
> > + CONFIG_SYS_CCSRBAR_PHYS_LOW)
> > +
> > +struct sys_info {
> > + unsigned long freq_processor[CONFIG_MAX_CPUS];
> > + unsigned long freq_systembus;
> > + unsigned long freq_ddrbus;
> > + unsigned long freq_localbus;
> > + unsigned long freq_sdhc;
> > +#ifdef CONFIG_SYS_DPAA_FMAN
> > + unsigned long freq_fman[CONFIG_SYS_NUM_FMAN]; #endif
> > + unsigned long freq_qman;
> > +};
> > +
> > +#define CONFIG_SYS_FSL_FM1_OFFSET 0xa00000
> > +#define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET 0xa88000
> > +#define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET 0xa89000
> > +#define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET 0xa8a000
> > +#define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET 0xa8b000
> > +#define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET 0xa8c000
> > +#define CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET 0xa8d000
> > +
> > +#define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0xae0000
> > +#define CONFIG_SYS_FSL_FM1_ADDR \
> > + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_OFFSET)
> > +#define CONFIG_SYS_FSL_FM1_DTSEC1_ADDR \
> > + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET)
> > +
> > +/* Device Configuration and Pin Control */ struct ccsr_gur {
>
> i will suggest to compare ccsr, scfg, etc registers between chassis2 &
> chassis3. Try to factor out the common code.
>
There seem to be lots of differences between them at the first sight,
but we still can review the code in the future.
> > + u32 porsr1; /* POR status 1 */
> > +#define FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK 0xFF800000
> > + u32 porsr2; /* POR status 2 */
> > + u8 res_008[0x20-0x8];
> > + u32 gpporcr1; /* General-purpose POR configuration */
> > + u32 gpporcr2;
> > +#define FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT 25
> > +#define FSL_CHASSIS2_DCFG_FUSESR_VID_MASK 0x1F
> > +#define FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT 20
> > +#define FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK 0x1F
> > + u32 dcfg_fusesr; /* Fuse status register */
> > + u8 res_02c[0x70-0x2c];
> > + u32 devdisr; /* Device disable control */
> > +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_1 0x80000000
> > +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_2 0x40000000
> > +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_3 0x20000000
> > +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_4 0x10000000
> > +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_5 0x08000000
> > +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_6 0x04000000
> > +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_9 0x00800000
> > +#define FSL_CHASSIS2_DEVDISR2_DTSEC1_10 0x00400000
> > +#define FSL_CHASSIS2_DEVDISR2_10GEC1_1 0x00800000
> > +#define FSL_CHASSIS2_DEVDISR2_10GEC1_2 0x00400000
> > +#define FSL_CHASSIS2_DEVDISR2_10GEC1_3 0x80000000
> > +#define FSL_CHASSIS2_DEVDISR2_10GEC1_4 0x40000000
> > + u32 devdisr2; /* Device disable control 2 */
> > + u32 devdisr3; /* Device disable control 3 */
> > + u32 devdisr4; /* Device disable control 4 */
> > + u32 devdisr5; /* Device disable control 5 */
> > + u32 devdisr6; /* Device disable control 6 */
> > + u32 devdisr7; /* Device disable control 7 */
> > + u8 res_08c[0x94-0x8c];
> > + u32 coredisru; /* uppper portion for support of 64 cores
> */
> > + u32 coredisrl; /* lower portion for support of 64 cores */
> > + u8 res_09c[0xa0-0x9c];
> > + u32 pvr; /* Processor version */
> > + u32 svr; /* System version */
> > + u32 mvr; /* Manufacturing version */
> > + u8 res_0ac[0xb0-0xac];
> > + u32 rstcr; /* Reset control */
> > + u32 rstrqpblsr; /* Reset request preboot loader status */
> > + u8 res_0b8[0xc0-0xb8];
> > + u32 rstrqmr1; /* Reset request mask */
> > + u8 res_0c4[0xc8-0xc4];
> > + u32 rstrqsr1; /* Reset request status */
> > + u8 res_0cc[0xd4-0xcc];
> > + u32 rstrqwdtmrl; /* Reset request WDT mask */
> > + u8 res_0d8[0xdc-0xd8];
> > + u32 rstrqwdtsrl; /* Reset request WDT status */
> > + u8 res_0e0[0xe4-0xe0];
> > + u32 brrl; /* Boot release */
> > + u8 res_0e8[0x100-0xe8];
> > + u32 rcwsr[16]; /* Reset control word status */
> > +#define FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT 25
> > +#define FSL_CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK 0x1f
> > +#define FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT 16
> > +#define FSL_CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK 0x3f
> > +#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK 0xffff0000
> > +#define FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT 16
> > + u8 res_140[0x200-0x140];
> > + u32 scratchrw[4]; /* Scratch Read/Write */
> > + u8 res_210[0x300-0x210];
> > + u32 scratchw1r[4]; /* Scratch Read (Write once) */
> > + u8 res_310[0x400-0x310];
> > + u32 crstsr[12];
> > + u8 res_430[0x500-0x430];
> > +
> > + /* PCI Express n Logical I/O Device Number register */
> > + u32 dcfg_ccsr_pex1liodnr;
> > + u32 dcfg_ccsr_pex2liodnr;
> > + u32 dcfg_ccsr_pex3liodnr;
> > + u32 dcfg_ccsr_pex4liodnr;
> > + /* RIO n Logical I/O Device Number register */
> > + u32 dcfg_ccsr_rio1liodnr;
> > + u32 dcfg_ccsr_rio2liodnr;
> > + u32 dcfg_ccsr_rio3liodnr;
> > + u32 dcfg_ccsr_rio4liodnr;
> > + /* USB Logical I/O Device Number register */
> > + u32 dcfg_ccsr_usb1liodnr;
> > + u32 dcfg_ccsr_usb2liodnr;
> > + u32 dcfg_ccsr_usb3liodnr;
> > + u32 dcfg_ccsr_usb4liodnr;
> > + /* SD/MMC Logical I/O Device Number register */
> > + u32 dcfg_ccsr_sdmmc1liodnr;
> > + u32 dcfg_ccsr_sdmmc2liodnr;
> > + u32 dcfg_ccsr_sdmmc3liodnr;
> > + u32 dcfg_ccsr_sdmmc4liodnr;
> > + /* RIO Message Unit Logical I/O Device Number register */
> > + u32 dcfg_ccsr_riomaintliodnr;
> > +
> > + u8 res_544[0x550-0x544];
> > + u32 sataliodnr[4];
> > + u8 res_560[0x570-0x560];
> > +
> > + u32 dcfg_ccsr_misc1liodnr;
> > + u32 dcfg_ccsr_misc2liodnr;
> > + u32 dcfg_ccsr_misc3liodnr;
> > + u32 dcfg_ccsr_misc4liodnr;
> > + u32 dcfg_ccsr_dma1liodnr;
> > + u32 dcfg_ccsr_dma2liodnr;
> > + u32 dcfg_ccsr_dma3liodnr;
> > + u32 dcfg_ccsr_dma4liodnr;
> > + u32 dcfg_ccsr_spare1liodnr;
> > + u32 dcfg_ccsr_spare2liodnr;
> > + u32 dcfg_ccsr_spare3liodnr;
> > + u32 dcfg_ccsr_spare4liodnr;
> > + u8 res_5a0[0x600-0x5a0];
> > + u32 dcfg_ccsr_pblsr;
> > +
> > + u32 pamubypenr;
> > + u32 dmacr1;
> > +
> > + u8 res_60c[0x610-0x60c];
> > + u32 dcfg_ccsr_gensr1;
> > + u32 dcfg_ccsr_gensr2;
> > + u32 dcfg_ccsr_gensr3;
> > + u32 dcfg_ccsr_gensr4;
> > + u32 dcfg_ccsr_gencr1;
> > + u32 dcfg_ccsr_gencr2;
> > + u32 dcfg_ccsr_gencr3;
> > + u32 dcfg_ccsr_gencr4;
> > + u32 dcfg_ccsr_gencr5;
> > + u32 dcfg_ccsr_gencr6;
> > + u32 dcfg_ccsr_gencr7;
> > + u8 res_63c[0x658-0x63c];
> > + u32 dcfg_ccsr_cgensr1;
> > + u32 dcfg_ccsr_cgensr0;
> > + u8 res_660[0x678-0x660];
> > + u32 dcfg_ccsr_cgencr1;
> > +
> > + u32 dcfg_ccsr_cgencr0;
> > + u8 res_680[0x700-0x680];
> > + u32 dcfg_ccsr_sriopstecr;
> > + u32 dcfg_ccsr_dcsrcr;
> > +
> > + u8 res_708[0x740-0x708]; /* add more registers when needed
> */
> > + u32 tp_ityp[64]; /* Topology Initiator Type Register */
> > + struct {
> > + u32 upper;
> > + u32 lower;
> > + } tp_cluster[16];
> > + u8 res_8c0[0xa00-0x8c0]; /* add more registers when needed
> */
> > + u32 dcfg_ccsr_qmbm_warmrst;
> > + u8 res_a04[0xa20-0xa04]; /* add more registers when needed
> */
> > + u32 dcfg_ccsr_reserved0;
> > + u32 dcfg_ccsr_reserved1;
> > +};
> > +
> > +#define SCFG_QSPI_CLKSEL 0x40100000
> > +#define SCFG_USBDRVVBUS_SELCR_USB1 0x00000000
> > +#define SCFG_USBDRVVBUS_SELCR_USB2 0x00000001
> > +#define SCFG_USBDRVVBUS_SELCR_USB3 0x00000002
> > +#define SCFG_USBPWRFAULT_INACTIVE 0x00000000
> > +#define SCFG_USBPWRFAULT_SHARED 0x00000001
> > +#define SCFG_USBPWRFAULT_DEDICATED 0x00000002
> > +#define SCFG_USBPWRFAULT_USB3_SHIFT 4
> > +#define SCFG_USBPWRFAULT_USB2_SHIFT 2
> > +#define SCFG_USBPWRFAULT_USB1_SHIFT 0
> > +
> > +#define SCFG_SNPCNFGCR_SECRDSNP 0x80000000
> > +#define SCFG_SNPCNFGCR_SECWRSNP 0x40000000
> > +
> > +/* Supplemental Configuration Unit */ struct ccsr_scfg {
> > + u8 res_000[0x100-0x000];
> > + u32 usb2_icid;
> > + u32 usb3_icid;
> > + u8 res_108[0x114-0x108];
> > + u32 dma_icid;
> > + u32 sata_icid;
> > + u32 usb1_icid;
> > + u32 qe_icid;
> > + u32 sdhc_icid;
> > + u32 edma_icid;
> > + u32 etr_icid;
> > + u32 core_sft_rst[4];
> > + u8 res_140[0x158-0x140];
> > + u32 altcbar;
> > + u32 qspi_cfg;
> > + u8 res_160[0x180-0x160];
> > + u32 dmamcr;
> > + u8 res_184[0x18c-0x184];
> > + u32 debug_icid;
> > + u8 res_190[0x1a4-0x190];
> > + u32 snpcnfgcr;
> > + u8 res_1a8[0x1ac-0x1a8];
> > + u32 intpcr;
> > + u8 res_1b0[0x204-0x1b0];
> > + u32 coresrencr;
> > + u8 res_208[0x220-0x208];
> > + u32 rvbar0_0;
> > + u32 rvbar0_1;
> > + u32 rvbar1_0;
> > + u32 rvbar1_1;
> > + u32 rvbar2_0;
> > + u32 rvbar2_1;
> > + u32 rvbar3_0;
> > + u32 rvbar3_1;
> > + u32 lpmcsr;
> > + u8 res_244[0x400-0x244];
> > + u32 qspidqscr;
> > + u32 ecgtxcmcr;
> > + u32 sdhciovselcr;
> > + u32 rcwpmuxcr0;
> > + u32 usbdrvvbus_selcr;
> > + u32 usbpwrfault_selcr;
> > + u32 usb_refclk_selcr1;
> > + u32 usb_refclk_selcr2;
> > + u32 usb_refclk_selcr3;
> > + u8 res_424[0x600-0x424];
> > + u32 scratchrw[4];
> > + u8 res_610[0x680-0x610];
> > + u32 corebcr;
> > + u8 res_684[0x1000-0x684];
> > + u32 pex1msiir;
> > + u32 pex1msir;
> > + u8 res_1008[0x2000-0x1008];
> > + u32 pex2;
> > + u32 pex2msir;
> > + u8 res_2008[0x3000-0x2008];
> > + u32 pex3msiir;
> > + u32 pex3msir;
> > +};
> > +
> > +/* Clocking */
> > +struct ccsr_clk {
> > + struct {
> > + u32 clkcncsr; /* core cluster n clock control status */
> > + u8 res_004[0x0c];
> > + u32 clkcghwacsr; /* Clock generator n hardware accelerator */
> > + u8 res_014[0x0c];
> > + } clkcsr[4];
> > + u8 res_040[0x780]; /* 0x100 */
> > + struct {
> > + u32 pllcngsr;
> > + u8 res_804[0x1c];
> > + } pllcgsr[2];
> > + u8 res_840[0x1c0];
> > + u32 clkpcsr; /* 0xa00 Platform clock domain control/status */
> > + u8 res_a04[0x1fc];
> > + u32 pllpgsr; /* 0xc00 Platform PLL General Status */
> > + u8 res_c04[0x1c];
> > + u32 plldgsr; /* 0xc20 DDR PLL General Status */
> > + u8 res_c24[0x3dc];
> > +};
> > +
> > +/* System Counter */
> > +struct sctr_regs {
> > + u32 cntcr;
> > + u32 cntsr;
> > + u32 cntcv1;
> > + u32 cntcv2;
> > + u32 resv1[4];
> > + u32 cntfid0;
> > + u32 cntfid1;
> > + u32 resv2[1002];
> > + u32 counterid[12];
> > +};
> > +
> > +#define SRDS_MAX_LANES 4
> > +struct ccsr_serdes {
> > + struct {
> > + u32 rstctl; /* Reset Control Register */
> > +#define SRDS_RSTCTL_RST 0x80000000
> > +#define SRDS_RSTCTL_RSTDONE 0x40000000
> > +#define SRDS_RSTCTL_RSTERR 0x20000000
> > +#define SRDS_RSTCTL_SWRST 0x10000000
> > +#define SRDS_RSTCTL_SDEN 0x00000020
> > +#define SRDS_RSTCTL_SDRST_B 0x00000040
> > +#define SRDS_RSTCTL_PLLRST_B 0x00000080
> > + u32 pllcr0; /* PLL Control Register 0 */
> > +#define SRDS_PLLCR0_POFF 0x80000000
> > +#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
> > +#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
> > +#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
> > +#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
> > +#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
> > +#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
> > +#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000
> > +#define SRDS_PLLCR0_PLL_LCK 0x00800000
> > +#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000
> > +#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
> > +#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000
> > +#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000
> > +#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000
> > +#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000
> > +#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000
> > + u32 pllcr1; /* PLL Control Register 1 */
> > +#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
> > + u32 res_0c; /* 0x00c */
> > + u32 pllcr3;
> > + u32 pllcr4;
> > + u8 res_18[0x20-0x18];
> > + } bank[2];
> > + u8 res_40[0x90-0x40];
> > + u32 srdstcalcr; /* 0x90 TX Calibration Control */
> > + u8 res_94[0xa0-0x94];
> > + u32 srdsrcalcr; /* 0xa0 RX Calibration Control */
> > + u8 res_a4[0xb0-0xa4];
> > + u32 srdsgr0; /* 0xb0 General Register 0 */
> > + u8 res_b4[0xe0-0xb4];
> > + u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */
> > + u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */
> > + u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */
> > + u32 srdspccr3; /* 0xec Protocol Converter Config 3 */
> > + u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */
> > + u8 res_f4[0x100-0xf4];
> > + struct {
> > + u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */
> > + u8 res_104[0x120-0x104];
> > + } srdslnpssr[4];
> > + u8 res_180[0x300-0x180];
> > + u32 srdspexeqcr;
> > + u32 srdspexeqpcr[11];
> > + u8 res_330[0x400-0x330];
> > + u32 srdspexapcr;
> > + u8 res_404[0x440-0x404];
> > + u32 srdspexbpcr;
> > + u8 res_444[0x800-0x444];
> > + struct {
> > + u32 gcr0; /* 0x800 General Control Register 0 */
> > + u32 gcr1; /* 0x804 General Control Register 1 */
> > + u32 gcr2; /* 0x808 General Control Register 2 */
> > + u32 sscr0;
> > + u32 recr0; /* 0x810 Receive Equalization Control */
> > + u32 recr1;
> > + u32 tecr0; /* 0x818 Transmit Equalization Control */
> > + u32 sscr1;
> > + u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */
> > + u8 res_824[0x83c-0x824];
> > + u32 tcsr3;
> > + } lane[4]; /* Lane A, B, C, D, E, F, G, H */
> > + u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */
> > +};
> > +
> > +#define CCI400_CTRLORD_TERM_BARRIER 0x00000008
> > +#define CCI400_CTRLORD_EN_BARRIER 0
> > +#define CCI400_SHAORD_NON_SHAREABLE 0x00000002
> > +#define CCI400_DVM_MESSAGE_REQ_EN 0x00000002
> > +#define CCI400_SNOOP_REQ_EN 0x00000001
> > +
> > +/* CCI-400 registers */
> > +struct ccsr_cci400 {
> > + u32 ctrl_ord; /* Control Override */
> > + u32 spec_ctrl; /* Speculation Control */
> > + u32 secure_access; /* Secure Access */
> > + u32 status; /* Status */
> > + u32 impr_err; /* Imprecise Error */
> > + u8 res_14[0x100 - 0x14];
> > + u32 pmcr; /* Performance Monitor Control */
> > + u8 res_104[0xfd0 - 0x104];
> > + u32 pid[8]; /* Peripheral ID */
> > + u32 cid[4]; /* Component ID */
> > + struct {
> > + u32 snoop_ctrl; /* Snoop Control */
> > + u32 sha_ord; /* Shareable Override */
> > + u8 res_1008[0x1100 - 0x1008];
> > + u32 rc_qos_ord; /* read channel QoS Value Override */
> > + u32 wc_qos_ord; /* read channel QoS Value Override */
> > + u8 res_1108[0x110c - 0x1108];
> > + u32 qos_ctrl; /* QoS Control */
> > + u32 max_ot; /* Max OT */
> > + u8 res_1114[0x1130 - 0x1114];
> > + u32 target_lat; /* Target Latency */
> > + u32 latency_regu; /* Latency Regulation */
> > + u32 qos_range; /* QoS Range */
> > + u8 res_113c[0x2000 - 0x113c];
> > + } slave[5]; /* Slave Interface */
> > + u8 res_6000[0x9004 - 0x6000];
> > + u32 cycle_counter; /* Cycle counter */
> > + u32 count_ctrl; /* Count Control */
> > + u32 overflow_status; /* Overflow Flag Status */
> > + u8 res_9010[0xa000 - 0x9010];
> > + struct {
> > + u32 event_select; /* Event Select */
> > + u32 event_count; /* Event Count */
> > + u32 counter_ctrl; /* Counter Control */
> > + u32 overflow_status; /* Overflow Flag Status */
> > + u8 res_a010[0xb000 - 0xa010];
> > + } pcounter[4]; /* Performance Counter */
> > + u8 res_e004[0x10000 - 0xe004];
> > +};
> > +
>
> LS1088A has CCI-400. This piece of code and define should be outside of
> chassis file
>
> > +/* MMU 500 */
> > +#define SMMU_SCR0 (SMMU_BASE + 0x0)
> > +#define SMMU_SCR1 (SMMU_BASE + 0x4)
> > +#define SMMU_SCR2 (SMMU_BASE + 0x8)
> > +#define SMMU_SACR (SMMU_BASE + 0x10)
> > +#define SMMU_IDR0 (SMMU_BASE + 0x20)
> > +#define SMMU_IDR1 (SMMU_BASE + 0x24)
> > +
> > +#define SMMU_NSCR0 (SMMU_BASE + 0x400)
> > +#define SMMU_NSCR2 (SMMU_BASE + 0x408)
> > +#define SMMU_NSACR (SMMU_BASE + 0x410)
> > +
> > +#define SCR0_CLIENTPD_MASK 0x00000001
> > +#define SCR0_USFCFG_MASK 0x00000400
> > +
> > +#endif /* __ARCH_FSL_LSCH2_IMMAP_H__*/
> > diff --git a/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
> > b/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
> > new file mode 100644
> > index 0000000..a3ccdb0
> > --- /dev/null
> > +++ b/arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
>
> not sure, will LS1088A also use below code?
>
>
This is enabled by CONFIG_LAYERSCAPE_NS_ACCESS.
It won't include it if there is no need.
> > @@ -0,0 +1,158 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
> > + */
> > +
> > +#ifndef __FSL_NS_ACCESS_H_
> > +#define __FSL_NS_ACCESS_H_
> > +
> > +enum csu_cslx_ind {
> > + CSU_CSLX_PCIE2_IO = 0,
> > + CSU_CSLX_PCIE1_IO,
> > + CSU_CSLX_MG2TPR_IP,
> > + CSU_CSLX_IFC_MEM,
> > + CSU_CSLX_OCRAM,
> > + CSU_CSLX_GIC,
> > + CSU_CSLX_PCIE1,
> > + CSU_CSLX_OCRAM2,
> > + CSU_CSLX_QSPI_MEM,
> > + CSU_CSLX_PCIE2,
> > + CSU_CSLX_SATA,
> > + CSU_CSLX_USB1,
> > + CSU_CSLX_QM_BM_SWPORTAL,
> > + CSU_CSLX_PCIE3 = 16,
> > + CSU_CSLX_PCIE3_IO,
> > + CSU_CSLX_USB3 = 20,
> > + CSU_CSLX_USB2,
> > + CSU_CSLX_SERDES = 32,
> > + CSU_CSLX_QDMA,
> > + CSU_CSLX_LPUART2,
> > + CSU_CSLX_LPUART1,
> > + CSU_CSLX_LPUART4,
> > + CSU_CSLX_LPUART3,
> > + CSU_CSLX_LPUART6,
> > + CSU_CSLX_LPUART5,
> > + CSU_CSLX_DSPI1 = 41,
> > + CSU_CSLX_QSPI,
> > + CSU_CSLX_ESDHC,
> > + CSU_CSLX_IFC = 45,
> > + CSU_CSLX_I2C1,
> > + CSU_CSLX_I2C3 = 48,
> > + CSU_CSLX_I2C2,
> > + CSU_CSLX_DUART2 = 50,
> > + CSU_CSLX_DUART1,
> > + CSU_CSLX_WDT2,
> > + CSU_CSLX_WDT1,
> > + CSU_CSLX_EDMA,
> > + CSU_CSLX_SYS_CNT,
> > + CSU_CSLX_DMA_MUX2,
> > + CSU_CSLX_DMA_MUX1,
> > + CSU_CSLX_DDR,
> > + CSU_CSLX_QUICC,
> > + CSU_CSLX_DCFG_CCU_RCPM = 60,
> > + CSU_CSLX_SECURE_BOOTROM,
> > + CSU_CSLX_SFP,
> > + CSU_CSLX_TMU,
> > + CSU_CSLX_SECURE_MONITOR,
> > + CSU_CSLX_SCFG,
> > + CSU_CSLX_FM = 66,
> > + CSU_CSLX_SEC5_5,
> > + CSU_CSLX_BM,
> > + CSU_CSLX_QM,
> > + CSU_CSLX_GPIO2 = 70,
> > + CSU_CSLX_GPIO1,
> > + CSU_CSLX_GPIO4,
> > + CSU_CSLX_GPIO3,
> > + CSU_CSLX_PLATFORM_CONT,
> > + CSU_CSLX_CSU,
> > + CSU_CSLX_IIC4 = 77,
> > + CSU_CSLX_WDT4,
> > + CSU_CSLX_WDT3,
> > + CSU_CSLX_WDT5 = 81,
> > + CSU_CSLX_FTM2 = 86,
> > + CSU_CSLX_FTM1,
> > + CSU_CSLX_FTM4,
> > + CSU_CSLX_FTM3,
> > + CSU_CSLX_FTM6 = 90,
> > + CSU_CSLX_FTM5,
> > + CSU_CSLX_FTM8,
> > + CSU_CSLX_FTM7,
> > + CSU_CSLX_DSCR = 121,
> > +};
> > +
> > +static struct csu_ns_dev ns_dev[] = {
> > + {CSU_CSLX_PCIE2_IO, CSU_ALL_RW},
> > + {CSU_CSLX_PCIE1_IO, CSU_ALL_RW},
> > + {CSU_CSLX_MG2TPR_IP, CSU_ALL_RW},
> > + {CSU_CSLX_IFC_MEM, CSU_ALL_RW},
> > + {CSU_CSLX_OCRAM, CSU_ALL_RW},
> > + {CSU_CSLX_GIC, CSU_ALL_RW},
> > + {CSU_CSLX_PCIE1, CSU_ALL_RW},
> > + {CSU_CSLX_OCRAM2, CSU_ALL_RW},
> > + {CSU_CSLX_QSPI_MEM, CSU_ALL_RW},
> > + {CSU_CSLX_PCIE2, CSU_ALL_RW},
> > + {CSU_CSLX_SATA, CSU_ALL_RW},
> > + {CSU_CSLX_USB1, CSU_ALL_RW},
> > + {CSU_CSLX_QM_BM_SWPORTAL, CSU_ALL_RW},
> > + {CSU_CSLX_PCIE3, CSU_ALL_RW},
> > + {CSU_CSLX_PCIE3_IO, CSU_ALL_RW},
> > + {CSU_CSLX_USB3, CSU_ALL_RW},
> > + {CSU_CSLX_USB2, CSU_ALL_RW},
> > + {CSU_CSLX_SERDES, CSU_ALL_RW},
> > + {CSU_CSLX_QDMA, CSU_ALL_RW},
> > + {CSU_CSLX_LPUART2, CSU_ALL_RW},
> > + {CSU_CSLX_LPUART1, CSU_ALL_RW},
> > + {CSU_CSLX_LPUART4, CSU_ALL_RW},
> > + {CSU_CSLX_LPUART3, CSU_ALL_RW},
> > + {CSU_CSLX_LPUART6, CSU_ALL_RW},
> > + {CSU_CSLX_LPUART5, CSU_ALL_RW},
> > + {CSU_CSLX_DSPI1, CSU_ALL_RW},
> > + {CSU_CSLX_QSPI, CSU_ALL_RW},
> > + {CSU_CSLX_ESDHC, CSU_ALL_RW},
> > + {CSU_CSLX_IFC, CSU_ALL_RW},
> > + {CSU_CSLX_I2C1, CSU_ALL_RW},
> > + {CSU_CSLX_I2C3, CSU_ALL_RW},
> > + {CSU_CSLX_I2C2, CSU_ALL_RW},
> > + {CSU_CSLX_DUART2, CSU_ALL_RW},
> > + {CSU_CSLX_DUART1, CSU_ALL_RW},
> > + {CSU_CSLX_WDT2, CSU_ALL_RW},
> > + {CSU_CSLX_WDT1, CSU_ALL_RW},
> > + {CSU_CSLX_EDMA, CSU_ALL_RW},
> > + {CSU_CSLX_SYS_CNT, CSU_ALL_RW},
> > + {CSU_CSLX_DMA_MUX2, CSU_ALL_RW},
> > + {CSU_CSLX_DMA_MUX1, CSU_ALL_RW},
> > + {CSU_CSLX_DDR, CSU_ALL_RW},
> > + {CSU_CSLX_QUICC, CSU_ALL_RW},
> > + {CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW},
> > + {CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW},
> > + {CSU_CSLX_SFP, CSU_ALL_RW},
> > + {CSU_CSLX_TMU, CSU_ALL_RW},
> > + {CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW},
> > + {CSU_CSLX_SCFG, CSU_ALL_RW},
> > + {CSU_CSLX_FM, CSU_ALL_RW},
> > + {CSU_CSLX_SEC5_5, CSU_ALL_RW},
> > + {CSU_CSLX_BM, CSU_ALL_RW},
> > + {CSU_CSLX_QM, CSU_ALL_RW},
> > + {CSU_CSLX_GPIO2, CSU_ALL_RW},
> > + {CSU_CSLX_GPIO1, CSU_ALL_RW},
> > + {CSU_CSLX_GPIO4, CSU_ALL_RW},
> > + {CSU_CSLX_GPIO3, CSU_ALL_RW},
> > + {CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW},
> > + {CSU_CSLX_CSU, CSU_ALL_RW},
> > + {CSU_CSLX_IIC4, CSU_ALL_RW},
> > + {CSU_CSLX_WDT4, CSU_ALL_RW},
> > + {CSU_CSLX_WDT3, CSU_ALL_RW},
> > + {CSU_CSLX_WDT5, CSU_ALL_RW},
> > + {CSU_CSLX_FTM2, CSU_ALL_RW},
> > + {CSU_CSLX_FTM1, CSU_ALL_RW},
> > + {CSU_CSLX_FTM4, CSU_ALL_RW},
> > + {CSU_CSLX_FTM3, CSU_ALL_RW},
> > + {CSU_CSLX_FTM6, CSU_ALL_RW},
> > + {CSU_CSLX_FTM5, CSU_ALL_RW},
> > + {CSU_CSLX_FTM8, CSU_ALL_RW},
> > + {CSU_CSLX_FTM7, CSU_ALL_RW},
> > + {CSU_CSLX_DSCR, CSU_ALL_RW},
> > +};
> > +
> > +#endif
>
>
> --prabhakar
>
>
Regards,
Qianyu
More information about the U-Boot
mailing list