[U-Boot] [PATCH v2 0/2] vexpress64: Juno: Add support for PCIe on Juno

[Liviu Dudau]

Hello,

This patchset enables PCIe for ARM's Juno boards and configures the
host bridge's address translation block. This enables the Linux kernel
to boot on Juno r1 using just a device tree and the generic host bridge
driver.

No support has been added at this phase for the SATA or Ethernet devices
present on the PCIe bus.

Changelog:
 - v2: Split XpressRICH3 code into pcie.c file and introduce vexpress64_pcie_init()
   that can be called from board_init(). Suggested by Linus Walleij.
 - v2: Set up the XpressRICH3 bridge class code to a valid value to correct the
   incorrect reset value.
 - v1: Original submission http://lists.denx.de/pipermail/u-boot/2015-October/229669.html

Liviu Dudau (2):
  vexpress64: Juno: Declare all 8GB of RAM and make them visible to the kernel.
  vexpress64: Juno: Add initialisation code for Juno R1 PCIe host bridge.

 board/armltd/vexpress64/Makefile     |   2 +-
 board/armltd/vexpress64/pcie.c       | 196 +++++++++++++++++++++++++++++++++++
 board/armltd/vexpress64/pcie.h       |  13 +++
 board/armltd/vexpress64/vexpress64.c |  10 ++
 include/configs/vexpress_aemv8a.h    |   4 +-
 5 files changed, 223 insertions(+), 2 deletions(-)
 create mode 100644 board/armltd/vexpress64/pcie.c
 create mode 100644 board/armltd/vexpress64/pcie.h

-- 
2.6.0