[U-Boot] [PATCH v2 5/6] sbc8641d: enable and test CONFIG_SYS_GENERIC_BOARD

[Paul Gortmaker]

Tested on commit 3ea0953d36023d7e50fb00b2e258d8fb2828aeac
("dm: Move pre-reloc init earlier to cope with board_early_init_f()")
since the commit after that ("Set up stdio earlier when using driver
model") hangs this board at "Net:" init, just like it hangs the
sbc8548 board[1].  So, until that is resolved, this will be the
newest functional baseline for both boards.

Boot up looks as follows:

 -------------------------------
U-Boot 2014.10-rc2-00061-gb5e69635dc20 (Aug 24 2015 - 12:20:40)

CPU:   8641D, Version: 2.0, (0x80900120)
Core:  e600 Core 0, Version: 2.2, (0x80040202)
Clock Configuration:
       CPU:1000 MHz, MPX:400  MHz
       DDR:200  MHz (400 MT/s data rate), LBC:25   MHz
L1:    D-cache 32 KiB enabled
       I-cache 32 KiB enabled
L2:    512 KiB enabled
I2C:   ready
DRAM:  512 MiB
Flash: 16 MiB
SRIO1: disabled
PCIe1: Root Complex, no link, regs @ 0xf8008000
PCIe1: Bus 00 - 00
PCIe2: Root Complex, no link, regs @ 0xf8009000
PCIe2: Bus 01 - 01
In:    serial
Out:   serial
Err:   serial
Net:   eTSEC1, eTSEC2, eTSEC3, eTSEC4
Hit any key to stop autoboot:  0
=> ver

U-Boot 2014.10-rc2-00061-gb5e69635dc20 (Aug 24 2015 - 12:20:40)
powerpc-linux-gcc (GCC) 4.5.2
GNU ld (GNU Binutils) 2.21
=>
 -------------------------------

As can be seen, the "generic" banner warning message is now gone.

[1] sbc8548 hang: https://www.marc.info/?l=u-boot&m=142655649417364&w=3

Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
---
 include/configs/sbc8641d.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 9fe90f00ff2a..2f3ec2e20088 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -20,6 +20,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* High Level Configuration Options */
 #define CONFIG_MPC8641		1	/* MPC8641 specific */
 #define CONFIG_SBC8641D		1	/* SBC8641D board specific */
-- 
2.1.0