[U-Boot] [PATCH 2/9] rtc: mc146818: Use probe() to set up the device

[Simon Glass]

At present this driver uses bind() to set up the device. The bind() method
should not touch the hardware, so move the init code to probe().

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 drivers/rtc/mc146818.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c
index 9e94a80..da804d5 100644
--- a/drivers/rtc/mc146818.c
+++ b/drivers/rtc/mc146818.c
@@ -225,7 +225,7 @@ static int rtc_mc146818_write8(struct udevice *dev, unsigned int reg, int val)
 	return 0;
 }
 
-static int rtc_mc146818_bind(struct udevice *dev)
+static int rtc_mc146818_probe(struct udevice *dev)
 {
 	mc146818_init();
 
@@ -249,7 +249,7 @@ U_BOOT_DRIVER(rtc_mc146818) = {
 	.name = "rtc_mc146818",
 	.id = UCLASS_RTC,
 	.of_match = rtc_mc146818_ids,
-	.bind = rtc_mc146818_bind,
+	.probe = rtc_mc146818_probe,
 	.ops = &rtc_mc146818_ops,
 };
 
-- 
2.6.0.rc2.230.g3dd15c0