[U-Boot] [PATCH] net: convert altera_tse to driver model and phylib
Thomas Chou
thomas at wytron.com.tw
Mon Oct 19 04:36:21 CEST 2015
Convert altera_tse to driver model and phylib.
Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
---
configs/nios2-generic_defconfig | 2 +
doc/device-tree-bindings/net/altera_tse.txt | 112 ++++
drivers/net/Kconfig | 9 +
drivers/net/altera_tse.c | 938 ++++++++++------------------
drivers/net/altera_tse.h | 283 +++------
include/configs/nios2-generic.h | 8 +
6 files changed, 536 insertions(+), 816 deletions(-)
create mode 100644 doc/device-tree-bindings/net/altera_tse.txt
diff --git a/configs/nios2-generic_defconfig b/configs/nios2-generic_defconfig
index ea07b56..fbc27ea 100644
--- a/configs/nios2-generic_defconfig
+++ b/configs/nios2-generic_defconfig
@@ -18,6 +18,8 @@ CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_ALTERA_PIO=y
CONFIG_MISC=y
CONFIG_ALTERA_SYSID=y
+CONFIG_DM_ETH=y
+CONFIG_ALTERA_TSE=y
CONFIG_ALTERA_JTAG_UART=y
CONFIG_ALTERA_JTAG_UART_BYPASS=y
CONFIG_TIMER=y
diff --git a/doc/device-tree-bindings/net/altera_tse.txt b/doc/device-tree-bindings/net/altera_tse.txt
new file mode 100644
index 0000000..cb190df
--- /dev/null
+++ b/doc/device-tree-bindings/net/altera_tse.txt
@@ -0,0 +1,112 @@
+* Altera Triple-Speed Ethernet MAC driver (TSE)
+
+Required properties:
+- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should
+ be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE.
+- reg: Address and length of the register set for the device. It contains
+ the information of registers in the same order as described by reg-names
+- reg-names: Should contain the reg names
+ "control_port": MAC configuration space region
+ "tx_csr": xDMA Tx dispatcher control and status space region
+ "tx_desc": MSGDMA Tx dispatcher descriptor space region
+ "rx_csr" : xDMA Rx dispatcher control and status space region
+ "rx_desc": MSGDMA Rx dispatcher descriptor space region
+ "rx_resp": MSGDMA Rx dispatcher response space region
+ "s1": SGDMA descriptor memory
+- interrupts: Should contain the TSE interrupts and it's mode.
+- interrupt-names: Should contain the interrupt names
+ "rx_irq": xDMA Rx dispatcher interrupt
+ "tx_irq": xDMA Tx dispatcher interrupt
+- rx-fifo-depth: MAC receive FIFO buffer depth in bytes
+- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes
+- phy-mode: See ethernet.txt in the same directory.
+- phy-handle: See ethernet.txt in the same directory.
+- phy-addr: See ethernet.txt in the same directory. A configuration should
+ include phy-handle or phy-addr.
+- altr,has-supplementary-unicast:
+ If present, TSE supports additional unicast addresses.
+ Otherwise additional unicast addresses are not supported.
+- altr,has-hash-multicast-filter:
+ If present, TSE supports a hash based multicast filter.
+ Otherwise, hash-based multicast filtering is not supported.
+
+- mdio device tree subnode: When the TSE has a phy connected to its local
+ mdio, there must be device tree subnode with the following
+ required properties:
+
+ - compatible: Must be "altr,tse-mdio".
+ - #address-cells: Must be <1>.
+ - #size-cells: Must be <0>.
+
+ For each phy on the mdio bus, there must be a node with the following
+ fields:
+
+ - reg: phy id used to communicate to phy.
+ - device_type: Must be "ethernet-phy".
+
+Optional properties:
+- local-mac-address: See ethernet.txt in the same directory.
+- max-frame-size: See ethernet.txt in the same directory.
+
+Example:
+
+ tse_sub_0_eth_tse_0: ethernet at 0x1,00000000 {
+ compatible = "altr,tse-msgdma-1.0";
+ reg = <0x00000001 0x00000000 0x00000400>,
+ <0x00000001 0x00000460 0x00000020>,
+ <0x00000001 0x00000480 0x00000020>,
+ <0x00000001 0x000004A0 0x00000008>,
+ <0x00000001 0x00000400 0x00000020>,
+ <0x00000001 0x00000420 0x00000020>;
+ reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+ interrupt-parent = <&hps_0_arm_gic_0>;
+ interrupts = <0 41 4>, <0 40 4>;
+ interrupt-names = "rx_irq", "tx_irq";
+ rx-fifo-depth = <2048>;
+ tx-fifo-depth = <2048>;
+ address-bits = <48>;
+ max-frame-size = <1500>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-mode = "gmii";
+ altr,has-supplementary-unicast;
+ altr,has-hash-multicast-filter;
+ phy-handle = <&phy0>;
+ mdio {
+ compatible = "altr,tse-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy at 0 {
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+
+ phy1: ethernet-phy at 1 {
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ };
+ };
+
+ tse_sub_1_eth_tse_0: ethernet at 0x1,00001000 {
+ compatible = "altr,tse-msgdma-1.0";
+ reg = <0x00000001 0x00001000 0x00000400>,
+ <0x00000001 0x00001460 0x00000020>,
+ <0x00000001 0x00001480 0x00000020>,
+ <0x00000001 0x000014A0 0x00000008>,
+ <0x00000001 0x00001400 0x00000020>,
+ <0x00000001 0x00001420 0x00000020>;
+ reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+ interrupt-parent = <&hps_0_arm_gic_0>;
+ interrupts = <0 43 4>, <0 42 4>;
+ interrupt-names = "rx_irq", "tx_irq";
+ rx-fifo-depth = <2048>;
+ tx-fifo-depth = <2048>;
+ address-bits = <48>;
+ max-frame-size = <1500>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-mode = "gmii";
+ altr,has-supplementary-unicast;
+ altr,has-hash-multicast-filter;
+ phy-handle = <&phy1>;
+ };
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index bbec6a6..2e472b4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -25,6 +25,15 @@ menuconfig NETDEVICES
if NETDEVICES
+config ALTERA_TSE
+ bool "Altera Triple-Speed Ethernet MAC support"
+ depends on DM_ETH
+ select PHYLIB
+ help
+ This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
+ Please find details on the "Embedded Peripherals IP User Guide"
+ of Altera.
+
config E1000
bool "Intel PRO/1000 Gigabit Ethernet support"
help
diff --git a/drivers/net/altera_tse.c b/drivers/net/altera_tse.c
index ad3bd1e..7d98ce3 100644
--- a/drivers/net/altera_tse.c
+++ b/drivers/net/altera_tse.c
@@ -4,42 +4,41 @@
* Copyright (C) 2008 Altera Corporation.
* Copyright (C) 2010 Thomas Chou <thomas at wytron.com.tw>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * SPDX-License-Identifier: GPL-2.0+
*/
-#include <config.h>
#include <common.h>
-#include <malloc.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdt_support.h>
+#include <memalign.h>
+#include <miiphy.h>
#include <net.h>
-#include <command.h>
#include <asm/cache.h>
#include <asm/dma-mapping.h>
-#include <miiphy.h>
+#include <asm/io.h>
#include "altera_tse.h"
+DECLARE_GLOBAL_DATA_PTR;
+
/* sgdma debug - print descriptor */
static void alt_sgdma_print_desc(volatile struct alt_sgdma_descriptor *desc)
{
debug("SGDMA DEBUG :\n");
- debug("desc->source : 0x%x \n", (unsigned int)desc->source);
- debug("desc->destination : 0x%x \n", (unsigned int)desc->destination);
- debug("desc->next : 0x%x \n", (unsigned int)desc->next);
- debug("desc->source_pad : 0x%x \n", (unsigned int)desc->source_pad);
- debug("desc->destination_pad : 0x%x \n",
- (unsigned int)desc->destination_pad);
- debug("desc->next_pad : 0x%x \n", (unsigned int)desc->next_pad);
- debug("desc->bytes_to_transfer : 0x%x \n",
- (unsigned int)desc->bytes_to_transfer);
- debug("desc->actual_bytes_transferred : 0x%x \n",
- (unsigned int)desc->actual_bytes_transferred);
- debug("desc->descriptor_status : 0x%x \n",
- (unsigned int)desc->descriptor_status);
- debug("desc->descriptor_control : 0x%x \n",
- (unsigned int)desc->descriptor_control);
+ debug("desc->source : 0x%x\n", (unsigned int)desc->source);
+ debug("desc->destination : 0x%x\n", (unsigned int)desc->destination);
+ debug("desc->next : 0x%x\n", (unsigned int)desc->next);
+ debug("desc->source_pad : 0x%x\n", desc->source_pad);
+ debug("desc->destination_pad : 0x%x\n", desc->destination_pad);
+ debug("desc->next_pad : 0x%x\n", desc->next_pad);
+ debug("desc->bytes_to_transfer : 0x%x\n", desc->bytes_to_transfer);
+ debug("desc->actual_bytes_transferred : 0x%x\n",
+ desc->actual_bytes_transferred);
+ debug("desc->descriptor_status : 0x%x\n", desc->descriptor_status);
+ debug("desc->descriptor_control : 0x%x\n", desc->descriptor_control);
}
-/* This is a generic routine that the SGDMA mode-specific routines
+/*
+ * This is a generic routine that the SGDMA mode-specific routines
* call to populate a descriptor.
* arg1 :pointer to first SGDMA descriptor.
* arg2 :pointer to next SGDMA descriptor.
@@ -108,7 +107,6 @@ static void alt_sgdma_construct_descriptor_burst(
* pointing at this descriptor, it will not run (via the "owned by
* hardware" bit) until all other descriptor has been set up.
*/
-
desc->descriptor_control =
((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) |
(generate_eop ?
@@ -121,18 +119,19 @@ static void alt_sgdma_construct_descriptor_burst(
);
}
-static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev,
- volatile struct alt_sgdma_descriptor *desc)
+static int alt_sgdma_do_sync_transfer(
+ volatile struct alt_sgdma_registers *regs,
+ volatile struct alt_sgdma_descriptor *desc)
{
unsigned int status;
int counter = 0;
/* Wait for any pending transfers to complete */
alt_sgdma_print_desc(desc);
- status = dev->status;
+ status = regs->status;
counter = 0;
- while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
+ while (regs->status & ALT_SGDMA_STATUS_BUSY_MSK) {
if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
break;
}
@@ -144,12 +143,12 @@ static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev,
* Clear any (previous) status register information
* that might occlude our error checking later.
*/
- dev->status = 0xFF;
+ regs->status = 0xFF;
/* Point the controller at the descriptor */
- dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
+ regs->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
debug("next desc in sgdma 0x%x\n",
- (unsigned int)dev->next_descriptor_pointer);
+ (unsigned int)regs->next_descriptor_pointer);
/*
* Set up SGDMA controller to:
@@ -157,30 +156,31 @@ static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev,
* - Run once a valid descriptor is written to controller
* - Stop on an error with any particular descriptor
*/
- dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
+ regs->control = (ALT_SGDMA_CONTROL_RUN_MSK |
ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
/* Wait for the descriptor (chain) to complete */
- status = dev->status;
+ status = regs->status;
debug("wait for sgdma....");
- while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK)
+ while (regs->status & ALT_SGDMA_STATUS_BUSY_MSK)
;
debug("done\n");
/* Clear Run */
- dev->control = (dev->control & (~ALT_SGDMA_CONTROL_RUN_MSK));
+ regs->control = (regs->control & (~ALT_SGDMA_CONTROL_RUN_MSK));
/* Get & clear status register contents */
- status = dev->status;
- dev->status = 0xFF;
+ status = regs->status;
+ regs->status = 0xFF;
/* we really should check if the transfer completes properly */
debug("tx sgdma status = 0x%x", status);
return 0;
}
-static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev,
- volatile struct alt_sgdma_descriptor *desc)
+static int alt_sgdma_do_async_transfer(
+ volatile struct alt_sgdma_registers *regs,
+ volatile struct alt_sgdma_descriptor *desc)
{
int counter = 0;
@@ -188,7 +188,7 @@ static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev,
alt_sgdma_print_desc(desc);
counter = 0;
- while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
+ while (regs->status & ALT_SGDMA_STATUS_BUSY_MSK) {
if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
break;
}
@@ -200,16 +200,16 @@ static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev,
* Clear the RUN bit in the control register. This is needed
* to restart the SGDMA engine later on.
*/
- dev->control = 0;
+ regs->control = 0;
/*
* Clear any (previous) status register information
* that might occlude our error checking later.
*/
- dev->status = 0xFF;
+ regs->status = 0xFF;
/* Point the controller at the descriptor */
- dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
+ regs->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
/*
* Set up SGDMA controller to:
@@ -217,26 +217,102 @@ static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev,
* - Run once a valid descriptor is written to controller
* - Stop on an error with any particular descriptor
*/
- dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
+ regs->control = (ALT_SGDMA_CONTROL_RUN_MSK |
ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
/* we really should check if the transfer completes properly */
return 0;
}
-/* u-boot interface */
-static int tse_adjust_link(struct altera_tse_priv *priv)
+static int tse_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
+{
+ struct altera_tse_priv *priv = bus->priv;
+ volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
+ unsigned int *mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
+ u16 value;
+
+ /* set mdio address */
+ mac_dev->mdio_phy1_addr = addr;
+ /* get the data */
+ value = mdio_regs[reg] & 0xffff;
+
+ return value;
+}
+
+static int tse_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
+ u16 val)
+{
+ struct altera_tse_priv *priv = bus->priv;
+ volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
+ unsigned int *mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
+
+ /* set mdio address */
+ mac_dev->mdio_phy1_addr = addr;
+ /* set the data */
+ mdio_regs[reg] = val;
+
+ return 0;
+}
+
+static int tse_mdio_init(const char *name, struct altera_tse_priv *priv)
+{
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate MDIO bus\n");
+ return -ENOMEM;
+ }
+
+ bus->read = tse_mdio_read;
+ bus->write = tse_mdio_write;
+ snprintf(bus->name, sizeof(bus->name), name);
+
+ bus->priv = (void *)priv;
+
+ return mdio_register(bus);
+}
+
+static int tse_phy_init(struct altera_tse_priv *priv, void *dev)
+{
+ struct phy_device *phydev;
+ int mask = 0xffffffff;
+
+ if (priv->phyaddr)
+ mask = 1 << priv->phyaddr;
+
+ phydev = phy_find_by_mask(priv->bus, mask, priv->interface);
+ if (!phydev)
+ return -ENODEV;
+
+ phy_connect_dev(phydev, dev);
+
+ phydev->supported &= PHY_GBIT_FEATURES;
+ phydev->advertising = phydev->supported;
+
+ priv->phydev = phydev;
+ phy_config(phydev);
+
+ return 0;
+}
+
+static void tse_adjust_link(struct altera_tse_priv *priv,
+ struct phy_device *phydev)
{
unsigned int refvar;
+ if (!phydev->link) {
+ printf("%s: No link.\n", phydev->dev->name);
+ return;
+ }
+
refvar = priv->mac_dev->command_config.image;
- if (!(priv->duplexity))
+ if (phydev->duplex)
refvar |= ALTERA_TSE_CMD_HD_ENA_MSK;
else
refvar &= ~ALTERA_TSE_CMD_HD_ENA_MSK;
- switch (priv->speed) {
+ switch (phydev->speed) {
case 1000:
refvar |= ALTERA_TSE_CMD_ETH_SPEED_MSK;
refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK;
@@ -252,24 +328,18 @@ static int tse_adjust_link(struct altera_tse_priv *priv)
}
priv->mac_dev->command_config.image = refvar;
- return 0;
}
-static int tse_eth_send(struct eth_device *dev, void *packet, int length)
+static int tse_eth_send(struct altera_tse_priv *priv, void *packet, int length)
{
- struct altera_tse_priv *priv = dev->priv;
volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
- volatile struct alt_sgdma_descriptor *tx_desc =
- (volatile struct alt_sgdma_descriptor *)priv->tx_desc;
-
- volatile struct alt_sgdma_descriptor *tx_desc_cur =
- (volatile struct alt_sgdma_descriptor *)&tx_desc[0];
+ volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc;
flush_dcache_range((unsigned long)packet,
(unsigned long)packet + length);
alt_sgdma_construct_descriptor_burst(
- (volatile struct alt_sgdma_descriptor *)&tx_desc[0],
- (volatile struct alt_sgdma_descriptor *)&tx_desc[1],
+ &tx_desc[0],
+ &tx_desc[1],
(unsigned int *)packet, /* read addr */
(unsigned int *)0,
length, /* length or EOP ,will change for each tx */
@@ -284,45 +354,52 @@ static int tse_eth_send(struct eth_device *dev, void *packet, int length)
/* send the packet */
debug("sending packet\n");
- alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur);
- debug("sent %d bytes\n", tx_desc_cur->actual_bytes_transferred);
- return tx_desc_cur->actual_bytes_transferred;
+ alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc);
+ debug("sent %d bytes\n", tx_desc->actual_bytes_transferred);
+
+ return tx_desc->actual_bytes_transferred;
}
-static int tse_eth_rx(struct eth_device *dev)
+static void tse_eth_rx_setup(struct altera_tse_priv *priv)
+{
+ uchar *rx_buf = net_rx_packets[priv->rx_cur & 1];
+ volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
+
+ invalidate_dcache_range((unsigned long)rx_buf,
+ (unsigned long)rx_buf + PKTSIZE_ALIGN);
+ alt_sgdma_construct_descriptor_burst(
+ &rx_desc[0],
+ &rx_desc[1],
+ (unsigned int)0x0, /* read addr */
+ (unsigned int *)rx_buf,
+ 0x0, /* length or EOP */
+ 0x0, /* gen eop */
+ 0x0, /* read fixed */
+ 0x0, /* write fixed or sop */
+ 0x0, /* read burst */
+ 0x0, /* write burst */
+ 0x0 /* channel */
+ );
+
+ /* setup the sgdma */
+ alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]);
+}
+
+static int tse_eth_rx(struct altera_tse_priv *priv, uchar **packetp)
{
int packet_length = 0;
- struct altera_tse_priv *priv = dev->priv;
- volatile struct alt_sgdma_descriptor *rx_desc =
- (volatile struct alt_sgdma_descriptor *)priv->rx_desc;
- volatile struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0];
+ uchar *rx_buf = net_rx_packets[priv->rx_cur & 1];
+ volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
- if (rx_desc_cur->descriptor_status &
+ if (rx_desc->descriptor_status &
ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) {
debug("got packet\n");
packet_length = rx_desc->actual_bytes_transferred;
- net_process_received_packet(net_rx_packets[0], packet_length);
+ *packetp = rx_buf;
/* start descriptor again */
- flush_dcache_range((unsigned long)(net_rx_packets[0]),
- (unsigned long)(net_rx_packets[0] +
- PKTSIZE_ALIGN));
- alt_sgdma_construct_descriptor_burst(
- (volatile struct alt_sgdma_descriptor *)&rx_desc[0],
- (volatile struct alt_sgdma_descriptor *)&rx_desc[1],
- (unsigned int)0x0, /* read addr */
- (unsigned int *)net_rx_packets[0],
- 0x0, /* length or EOP */
- 0x0, /* gen eop */
- 0x0, /* read fixed */
- 0x0, /* write fixed or sop */
- 0x0, /* read burst */
- 0x0, /* write burst */
- 0x0 /* channel */
- );
-
- /* setup the sgdma */
- alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]);
+ priv->rx_cur++;
+ tse_eth_rx_setup(priv);
return packet_length;
}
@@ -330,17 +407,9 @@ static int tse_eth_rx(struct eth_device *dev)
return -1;
}
-static void tse_eth_halt(struct eth_device *dev)
-{
- /* don't do anything! */
- /* this gets called after each uboot */
- /* network command. don't need to reset the thing all of the time */
-}
-
-static void tse_eth_reset(struct eth_device *dev)
+static void tse_eth_reset(struct altera_tse_priv *priv)
{
/* stop sgdmas, disable tse receive */
- struct altera_tse_priv *priv = dev->priv;
volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
volatile struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx;
volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
@@ -390,397 +459,20 @@ static void tse_eth_reset(struct eth_device *dev)
debug("TSEMAC SW reset bit never cleared!\n");
}
-static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum)
-{
- volatile struct alt_tse_mac *mac_dev;
- unsigned int *mdio_regs;
- unsigned int data;
- u16 value;
-
- mac_dev = priv->mac_dev;
-
- /* set mdio address */
- mac_dev->mdio_phy1_addr = priv->phyaddr;
- mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
-
- /* get the data */
- data = mdio_regs[regnum];
-
- value = data & 0xffff;
-
- return value;
-}
-
-static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum,
- unsigned int value)
-{
- volatile struct alt_tse_mac *mac_dev;
- unsigned int *mdio_regs;
- unsigned int data;
-
- mac_dev = priv->mac_dev;
-
- /* set mdio address */
- mac_dev->mdio_phy1_addr = priv->phyaddr;
- mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
-
- /* get the data */
- data = (unsigned int)value;
-
- mdio_regs[regnum] = data;
-
- return 0;
-}
-
-/* MDIO access to phy */
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
-static int altera_tse_miiphy_write(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
-{
- struct eth_device *dev;
- struct altera_tse_priv *priv;
- dev = eth_get_dev_by_name(devname);
- priv = dev->priv;
-
- tse_mdio_write(priv, (uint) reg, (uint) value);
-
- return 0;
-}
-
-static int altera_tse_miiphy_read(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value)
-{
- struct eth_device *dev;
- struct altera_tse_priv *priv;
- volatile struct alt_tse_mac *mac_dev;
- unsigned int *mdio_regs;
-
- dev = eth_get_dev_by_name(devname);
- priv = dev->priv;
-
- mac_dev = priv->mac_dev;
- mac_dev->mdio_phy1_addr = (int)addr;
- mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
-
- *value = 0xffff & mdio_regs[reg];
-
- return 0;
-
-}
-#endif
-
-/*
- * Also copied from tsec.c
- */
-/* Parse the status register for link, and then do
- * auto-negotiation
- */
-static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv)
-{
- /*
- * Wait if the link is up, and autonegotiation is in progress
- * (ie - we're capable and it's not done)
- */
- mii_reg = tse_mdio_read(priv, MIIM_STATUS);
-
- if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & BMSR_ANEGCAPABLE)
- && !(mii_reg & BMSR_ANEGCOMPLETE)) {
- int i = 0;
-
- puts("Waiting for PHY auto negotiation to complete");
- while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
- /*
- * Timeout reached ?
- */
- if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts(" TIMEOUT !\n");
- priv->link = 0;
- return 0;
- }
-
- if ((i++ % 1000) == 0)
- putc('.');
- udelay(1000); /* 1 ms */
- mii_reg = tse_mdio_read(priv, MIIM_STATUS);
- }
- puts(" done\n");
- priv->link = 1;
- udelay(500000); /* another 500 ms (results in faster booting) */
- } else {
- if (mii_reg & MIIM_STATUS_LINK) {
- debug("Link is up\n");
- priv->link = 1;
- } else {
- debug("Link is down\n");
- priv->link = 0;
- }
- }
-
- return 0;
-}
-
-/* Parse the 88E1011's status register for speed and duplex
- * information
- */
-static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv)
-{
- uint speed;
-
- mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
-
- if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) &&
- !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
- int i = 0;
-
- puts("Waiting for PHY realtime link");
- while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
- /* Timeout reached ? */
- if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts(" TIMEOUT !\n");
- priv->link = 0;
- break;
- }
-
- if ((i++ == 1000) == 0) {
- i = 0;
- puts(".");
- }
- udelay(1000); /* 1 ms */
- mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
- }
- puts(" done\n");
- udelay(500000); /* another 500 ms (results in faster booting) */
- } else {
- if (mii_reg & MIIM_88E1011_PHYSTAT_LINK)
- priv->link = 1;
- else
- priv->link = 0;
- }
-
- if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
-
- switch (speed) {
- case MIIM_88E1011_PHYSTAT_GBIT:
- priv->speed = 1000;
- debug("PHY Speed is 1000Mbit\n");
- break;
- case MIIM_88E1011_PHYSTAT_100:
- debug("PHY Speed is 100Mbit\n");
- priv->speed = 100;
- break;
- default:
- debug("PHY Speed is 10Mbit\n");
- priv->speed = 10;
- }
-
- return 0;
-}
-
-static uint mii_m88e1111s_setmode_sr(uint mii_reg, struct altera_tse_priv *priv)
-{
- uint mii_data = tse_mdio_read(priv, mii_reg);
- mii_data &= 0xfff0;
- if ((priv->flags >= 1) && (priv->flags <= 4))
- mii_data |= 0xb;
- else if (priv->flags == 5)
- mii_data |= 0x4;
-
- return mii_data;
-}
-
-static uint mii_m88e1111s_setmode_cr(uint mii_reg, struct altera_tse_priv *priv)
-{
- uint mii_data = tse_mdio_read(priv, mii_reg);
- mii_data &= ~0x82;
- if ((priv->flags >= 1) && (priv->flags <= 4))
- mii_data |= 0x82;
-
- return mii_data;
-}
-
-/*
- * Returns which value to write to the control register.
- * For 10/100, the value is slightly different
- */
-static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv)
-{
- return MIIM_CONTROL_INIT;
-}
-
-/*
- * PHY & MDIO code
- * Need to add SGMII stuff
- *
- */
-
-static struct phy_info phy_info_M88E1111S = {
- 0x01410cc,
- "Marvell 88E1111S",
- 4,
- (struct phy_cmd[]){ /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_88E1111_PHY_EXT_SR, 0x848f,
- &mii_m88e1111s_setmode_sr},
- /* Delay RGMII TX and RX */
- {MIIM_88E1111_PHY_EXT_CR, 0x0cd2,
- &mii_m88e1111s_setmode_cr},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read,
- &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- },
-};
-
-/* a generic flavor. */
-static struct phy_info phy_info_generic = {
- 0,
- "Unknown/Generic PHY",
- 32,
- (struct phy_cmd[]){ /* config */
- {MII_BMCR, BMCR_RESET, NULL},
- {MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* startup */
- {MII_BMSR, miim_read, NULL},
- {MII_BMSR, miim_read, &mii_parse_sr},
- {miim_end,}
- },
- (struct phy_cmd[]){ /* shutdown */
- {miim_end,}
- }
-};
-
-static struct phy_info *phy_info[] = {
- &phy_info_M88E1111S,
- NULL
-};
-
- /* Grab the identifier of the device's PHY, and search through
- * all of the known PHYs to see if one matches. If so, return
- * it, if not, return NULL
- */
-static struct phy_info *get_phy_info(struct eth_device *dev)
-{
- struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
- uint phy_reg, phy_ID;
- int i;
- struct phy_info *theInfo = NULL;
-
- /* Grab the bits from PHYIR1, and put them in the upper half */
- phy_reg = tse_mdio_read(priv, MIIM_PHYIR1);
- phy_ID = (phy_reg & 0xffff) << 16;
-
- /* Grab the bits from PHYIR2, and put them in the lower half */
- phy_reg = tse_mdio_read(priv, MIIM_PHYIR2);
- phy_ID |= (phy_reg & 0xffff);
-
- /* loop through all the known PHY types, and find one that */
- /* matches the ID we read from the PHY. */
- for (i = 0; phy_info[i]; i++) {
- if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) {
- theInfo = phy_info[i];
- break;
- }
- }
-
- if (theInfo == NULL) {
- theInfo = &phy_info_generic;
- debug("%s: No support for PHY id %x; assuming generic\n",
- dev->name, phy_ID);
- } else
- debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
-
- return theInfo;
-}
-
-/* Execute the given series of commands on the given device's
- * PHY, running functions as necessary
- */
-static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd)
-{
- int i;
- uint result;
-
- for (i = 0; cmd->mii_reg != miim_end; i++) {
- if (cmd->mii_data == miim_read) {
- result = tse_mdio_read(priv, cmd->mii_reg);
-
- if (cmd->funct != NULL)
- (*(cmd->funct)) (result, priv);
-
- } else {
- if (cmd->funct != NULL)
- result = (*(cmd->funct)) (cmd->mii_reg, priv);
- else
- result = cmd->mii_data;
-
- tse_mdio_write(priv, cmd->mii_reg, result);
-
- }
- cmd++;
- }
-}
-
-/* Phy init code */
-static int init_phy(struct eth_device *dev)
+static int tse_set_mac_address(struct altera_tse_priv *priv, u8 *enetaddr)
{
- struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
- struct phy_info *curphy;
-
- /* Get the cmd structure corresponding to the attached
- * PHY */
- curphy = get_phy_info(dev);
-
- if (curphy == NULL) {
- priv->phyinfo = NULL;
- debug("%s: No PHY found\n", dev->name);
-
- return 0;
- } else
- debug("%s found\n", curphy->name);
- priv->phyinfo = curphy;
-
- phy_run_commands(priv, priv->phyinfo->config);
-
- return 1;
-}
-
-static int tse_set_mac_address(struct eth_device *dev)
-{
- struct altera_tse_priv *priv = dev->priv;
volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
debug("Setting MAC address to 0x%02x%02x%02x%02x%02x%02x\n",
- dev->enetaddr[5], dev->enetaddr[4],
- dev->enetaddr[3], dev->enetaddr[2],
- dev->enetaddr[1], dev->enetaddr[0]);
- mac_dev->mac_addr_0 = ((dev->enetaddr[3]) << 24 |
- (dev->enetaddr[2]) << 16 |
- (dev->enetaddr[1]) << 8 | (dev->enetaddr[0]));
+ enetaddr[5], enetaddr[4],
+ enetaddr[3], enetaddr[2],
+ enetaddr[1], enetaddr[0]);
+ mac_dev->mac_addr_0 = ((enetaddr[3]) << 24 |
+ (enetaddr[2]) << 16 |
+ (enetaddr[1]) << 8 | (enetaddr[0]));
- mac_dev->mac_addr_1 = ((dev->enetaddr[5] << 8 |
- (dev->enetaddr[4])) & 0xFFFF);
+ mac_dev->mac_addr_1 = ((enetaddr[5] << 8 |
+ (enetaddr[4])) & 0xFFFF);
/* Set the MAC address */
mac_dev->supp_mac_addr_0_0 = mac_dev->mac_addr_0;
@@ -797,62 +489,20 @@ static int tse_set_mac_address(struct eth_device *dev)
/* Set the MAC address */
mac_dev->supp_mac_addr_3_0 = mac_dev->mac_addr_0;
mac_dev->supp_mac_addr_3_1 = mac_dev->mac_addr_1;
+
return 0;
}
-static int tse_eth_init(struct eth_device *dev, bd_t * bd)
+static int tse_eth_init(struct altera_tse_priv *priv)
{
int dat;
- struct altera_tse_priv *priv = dev->priv;
volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
- volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc;
- volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
- volatile struct alt_sgdma_descriptor *rx_desc_cur =
- (volatile struct alt_sgdma_descriptor *)&rx_desc[0];
-
- /* stop controller */
- debug("Reseting TSE & SGDMAs\n");
- tse_eth_reset(dev);
-
- /* start the phy */
- debug("Configuring PHY\n");
- phy_run_commands(priv, priv->phyinfo->startup);
+ int ret;
/* need to create sgdma */
- debug("Configuring tx desc\n");
- alt_sgdma_construct_descriptor_burst(
- (volatile struct alt_sgdma_descriptor *)&tx_desc[0],
- (volatile struct alt_sgdma_descriptor *)&tx_desc[1],
- (unsigned int *)NULL, /* read addr */
- (unsigned int *)0,
- 0, /* length or EOP ,will change for each tx */
- 0x1, /* gen eop */
- 0x0, /* read fixed */
- 0x1, /* write fixed or sop */
- 0x0, /* read burst */
- 0x0, /* write burst */
- 0x0 /* channel */
- );
debug("Configuring rx desc\n");
- flush_dcache_range((unsigned long)(net_rx_packets[0]),
- (unsigned long)(net_rx_packets[0]) + PKTSIZE_ALIGN);
- alt_sgdma_construct_descriptor_burst(
- (volatile struct alt_sgdma_descriptor *)&rx_desc[0],
- (volatile struct alt_sgdma_descriptor *)&rx_desc[1],
- (unsigned int)0x0, /* read addr */
- (unsigned int *)net_rx_packets[0],
- 0x0, /* length or EOP */
- 0x0, /* gen eop */
- 0x0, /* read fixed */
- 0x0, /* write fixed or sop */
- 0x0, /* read burst */
- 0x0, /* write burst */
- 0x0 /* channel */
- );
- /* start rx async transfer */
- debug("Starting rx sgdma\n");
- alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur);
-
+ priv->rx_cur = 0;
+ tse_eth_rx_setup(priv);
/* start TSE */
debug("Configuring TSE Mac\n");
/* Initialize MAC registers */
@@ -862,10 +512,10 @@ static int tse_eth_init(struct eth_device *dev, bd_t * bd)
mac_dev->tx_almost_empty_threshold = 8;
mac_dev->tx_almost_full_threshold = 3;
mac_dev->tx_sel_empty_threshold =
- CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
+ priv->tx_fifo_depth - 16;
mac_dev->tx_sel_full_threshold = 0;
mac_dev->rx_sel_empty_threshold =
- CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
+ priv->rx_fifo_depth - 16;
mac_dev->rx_sel_full_threshold = 0;
/* NO Shift */
@@ -878,93 +528,171 @@ static int tse_eth_init(struct eth_device *dev, bd_t * bd)
mac_dev->command_config.image = dat;
- /* configure the TSE core */
- /* -- output clocks, */
- /* -- and later config stuff for SGMII */
- if (priv->link) {
- debug("Adjusting TSE to link speed\n");
- tse_adjust_link(priv);
+ /* Start up the PHY */
+ ret = phy_startup(priv->phydev);
+ if (ret) {
+ debug("Could not initialize PHY %s\n",
+ priv->phydev->dev->name);
+ return ret;
}
- return priv->link ? 0 : -1;
+ tse_adjust_link(priv, priv->phydev);
+
+ if (!priv->phydev->link)
+ return -EIO;
+
+ return 0;
}
-/* TSE init code */
-int altera_tse_initialize(u8 dev_num, int mac_base,
- int sgdma_rx_base, int sgdma_tx_base,
- u32 sgdma_desc_base, u32 sgdma_desc_size)
+static int altera_tse_start(struct udevice *dev)
{
- struct altera_tse_priv *priv;
- struct eth_device *dev;
- struct alt_sgdma_descriptor *rx_desc;
- struct alt_sgdma_descriptor *tx_desc;
- unsigned long dma_handle;
+ struct altera_tse_priv *priv = dev_get_priv(dev);
- dev = (struct eth_device *)malloc(sizeof *dev);
+ return tse_eth_init(priv);
+}
+
+static int altera_tse_send(struct udevice *dev, void *packet, int length)
+{
+ struct altera_tse_priv *priv = dev_get_priv(dev);
+
+ return tse_eth_send(priv, packet, length);
+}
- if (NULL == dev)
- return 0;
+static int altera_tse_recv(struct udevice *dev, int flags, uchar **packetp)
+{
+ struct altera_tse_priv *priv = dev_get_priv(dev);
- memset(dev, 0, sizeof *dev);
+ return tse_eth_rx(priv, packetp);
+}
- priv = malloc(sizeof(*priv));
+static void altera_tse_stop(struct udevice *dev)
+{
+ struct altera_tse_priv *priv = dev_get_priv(dev);
+
+ /* stop controller */
+ debug("Reset TSE & SGDMAs\n");
+ tse_eth_reset(priv);
+}
+
+static int altera_tse_write_hwaddr(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct altera_tse_priv *priv = dev_get_priv(dev);
+
+ return tse_set_mac_address(priv, pdata->enetaddr);
+}
- if (!priv) {
- free(dev);
- return 0;
+static int altera_tse_probe(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct altera_tse_priv *priv = dev_get_priv(dev);
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
+ const char *list, *end;
+ const fdt32_t *cell;
+ void *base, *desc_mem = NULL;
+ unsigned long addr, size;
+ int len, idx;
+ int ret;
+
+ /* decode regs, assume address-cells and size-cells are both one */
+ list = fdt_getprop(blob, node, "reg-names", &len);
+ if (!list)
+ return -ENOENT;
+ end = list + len;
+ cell = fdt_getprop(blob, node, "reg", &len);
+ if (!cell)
+ return -ENOENT;
+ idx = 0;
+ while (list < end) {
+ addr = fdt_translate_address((void *)blob,
+ node, cell + idx);
+ size = fdt_addr_to_cpu(cell[idx + 1]);
+ base = ioremap(addr, size);
+ len = strlen(list);
+ if (strcmp(list, "control_port") == 0)
+ priv->mac_dev = base;
+ else if (strcmp(list, "rx_csr") == 0)
+ priv->sgdma_rx = base;
+ else if (strcmp(list, "tx_csr") == 0)
+ priv->sgdma_tx = base;
+ else if (strcmp(list, "s1") == 0)
+ desc_mem = base;
+ idx += 2;
+ list += (len + 1);
}
- if (sgdma_desc_size) {
- if (sgdma_desc_size < (sizeof(*tx_desc) * (3 + PKTBUFSRX))) {
- printf("ALTERA_TSE-%hu: "
- "descriptor memory is too small\n", dev_num);
- free(priv);
- free(dev);
- return 0;
- }
- tx_desc = (struct alt_sgdma_descriptor *)sgdma_desc_base;
- } else {
- tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX),
- &dma_handle);
+ /* decode fifo depth */
+ priv->rx_fifo_depth = fdtdec_get_int(blob, node,
+ "rx-fifo-depth", 0);
+ priv->tx_fifo_depth = fdtdec_get_int(blob, node,
+ "tx-fifo-depth", 0);
+ /* decode phy */
+ addr = fdtdec_get_int(blob, node,
+ "phy-handle", 0);
+ addr = fdt_node_offset_by_phandle(blob, addr);
+ priv->phyaddr = fdtdec_get_int(blob, addr,
+ "reg", 0);
+ /* init desc */
+ len = sizeof(struct alt_sgdma_descriptor) * (3 + PKTBUFSRX);
+ if (!desc_mem) {
+ desc_mem = dma_alloc_coherent(len, &addr);
+ if (!desc_mem)
+ return -ENOMEM;
}
+ memset(desc_mem, 0, len);
+ priv->tx_desc = desc_mem;
+ priv->rx_desc = priv->tx_desc + 2;
+
+ /* stop controller */
+ debug("Reset TSE & SGDMAs\n");
+ tse_eth_reset(priv);
+ /* inti mdio phy */
+ priv->interface = pdata->phy_interface;
+ tse_mdio_init(dev->name, priv);
+ priv->bus = miiphy_get_dev_by_name(dev->name);
- rx_desc = tx_desc + 2;
- debug("tx desc: address = 0x%x\n", (unsigned int)tx_desc);
- debug("rx desc: address = 0x%x\n", (unsigned int)rx_desc);
+ ret = tse_phy_init(priv, dev);
- if (!tx_desc) {
- free(priv);
- free(dev);
- return 0;
+ return ret;
+}
+
+static int altera_tse_ofdata_to_platdata(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ const char *phy_mode;
+
+ pdata->phy_interface = -1;
+ phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+ if (phy_mode)
+ pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+ if (pdata->phy_interface == -1) {
+ debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+ return -EINVAL;
}
- memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1));
- memset(tx_desc, 0, (sizeof *tx_desc) * 2);
-
- /* initialize tse priv */
- priv->mac_dev = (volatile struct alt_tse_mac *)mac_base;
- priv->sgdma_rx = (volatile struct alt_sgdma_registers *)sgdma_rx_base;
- priv->sgdma_tx = (volatile struct alt_sgdma_registers *)sgdma_tx_base;
- priv->phyaddr = CONFIG_SYS_ALTERA_TSE_PHY_ADDR;
- priv->flags = CONFIG_SYS_ALTERA_TSE_FLAGS;
- priv->rx_desc = rx_desc;
- priv->tx_desc = tx_desc;
-
- /* init eth structure */
- dev->priv = priv;
- dev->init = tse_eth_init;
- dev->halt = tse_eth_halt;
- dev->send = tse_eth_send;
- dev->recv = tse_eth_rx;
- dev->write_hwaddr = tse_set_mac_address;
- sprintf(dev->name, "%s-%hu", "ALTERA_TSE", dev_num);
-
- eth_register(dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
- miiphy_register(dev->name, altera_tse_miiphy_read,
- altera_tse_miiphy_write);
-#endif
-
- init_phy(dev);
-
- return 1;
+
+ return 0;
}
+
+static const struct eth_ops altera_tse_ops = {
+ .start = altera_tse_start,
+ .send = altera_tse_send,
+ .recv = altera_tse_recv,
+ .stop = altera_tse_stop,
+ .write_hwaddr = altera_tse_write_hwaddr,
+};
+
+static const struct udevice_id altera_tse_ids[] = {
+ { .compatible = "altr,tse-1.0", },
+ { }
+};
+
+U_BOOT_DRIVER(altera_tse) = {
+ .name = "altera_tse",
+ .id = UCLASS_ETH,
+ .of_match = altera_tse_ids,
+ .ops = &altera_tse_ops,
+ .ofdata_to_platdata = altera_tse_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+ .priv_auto_alloc_size = sizeof(struct altera_tse_priv),
+ .probe = altera_tse_probe,
+};
diff --git a/drivers/net/altera_tse.h b/drivers/net/altera_tse.h
index 8880bfc..79ecb22 100644
--- a/drivers/net/altera_tse.h
+++ b/drivers/net/altera_tse.h
@@ -13,121 +13,25 @@
#define __packed_1_ __attribute__ ((packed, aligned(1)))
-/* PHY Stuff */
-#define miim_end -2
-#define miim_read -1
-
-#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */
-
-#ifndef CONFIG_SYS_TBIPA_VALUE
-#define CONFIG_SYS_TBIPA_VALUE 0x1f
-#endif
-#define MIIMCFG_INIT_VALUE 0x00000003
-#define MIIMCFG_RESET 0x80000000
-
-#define MIIMIND_BUSY 0x00000001
-#define MIIMIND_NOTVALID 0x00000004
-
-#define MIIM_CONTROL 0x00
-#define MIIM_CONTROL_RESET 0x00009140
-#define MIIM_CONTROL_INIT 0x00001140
-#define MIIM_CONTROL_RESTART 0x00001340
-#define MIIM_ANEN 0x00001000
-
-#define MIIM_CR 0x00
-#define MIIM_CR_RST 0x00008000
-#define MIIM_CR_INIT 0x00001000
-
-#define MIIM_STATUS 0x1
-#define MIIM_STATUS_AN_DONE 0x00000020
-#define MIIM_STATUS_LINK 0x0004
-
-#define MIIM_PHYIR1 0x2
-#define MIIM_PHYIR2 0x3
-
-#define MIIM_ANAR 0x4
-#define MIIM_ANAR_INIT 0x1e1
-
-#define MIIM_TBI_ANLPBPA 0x5
-#define MIIM_TBI_ANLPBPA_HALF 0x00000040
-#define MIIM_TBI_ANLPBPA_FULL 0x00000020
-
-#define MIIM_TBI_ANEX 0x6
-#define MIIM_TBI_ANEX_NP 0x00000004
-#define MIIM_TBI_ANEX_PRX 0x00000002
-
-#define MIIM_GBIT_CONTROL 0x9
-#define MIIM_GBIT_CONTROL_INIT 0xe00
-
-#define MIIM_EXT_PAGE_ACCESS 0x1f
-
-/* 88E1011 PHY Status Register */
-#define MIIM_88E1011_PHY_STATUS 0x11
-#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
-#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
-#define MIIM_88E1011_PHYSTAT_100 0x4000
-#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
-#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
-#define MIIM_88E1011_PHYSTAT_LINK 0x0400
-
-#define MIIM_88E1011_PHY_SCR 0x10
-#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060
-
-#define MIIM_88E1111_PHY_EXT_CR 0x14
-#define MIIM_88E1111_PHY_EXT_SR 0x1b
-
-/* 88E1111 PHY LED Control Register */
-#define MIIM_88E1111_PHY_LED_CONTROL 24
-#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
-#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
-
-#define MIIM_READ_COMMAND 0x00000001
-
-/* struct phy_info: a structure which defines attributes for a PHY
- * id will contain a number which represents the PHY. During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is. The 32-bit result
- * gotten from the PHY will be shifted right by "shift" bits to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * The struct phy_cmd entries represent pointers to an arrays of
- * commands which tell the driver what to do to the PHY.
- */
-struct phy_info {
- uint id;
- char *name;
- uint shift;
- /* Called to configure the PHY, and modify the controller
- * based on the results */
- struct phy_cmd *config;
-
- /* Called when starting up the controller */
- struct phy_cmd *startup;
-
- /* Called when bringing down the controller */
- struct phy_cmd *shutdown;
-};
-
/* SGDMA Stuff */
-#define ALT_SGDMA_STATUS_ERROR_MSK (0x00000001)
-#define ALT_SGDMA_STATUS_EOP_ENCOUNTERED_MSK (0x00000002)
-#define ALT_SGDMA_STATUS_DESC_COMPLETED_MSK (0x00000004)
-#define ALT_SGDMA_STATUS_CHAIN_COMPLETED_MSK (0x00000008)
-#define ALT_SGDMA_STATUS_BUSY_MSK (0x00000010)
-
-#define ALT_SGDMA_CONTROL_IE_ERROR_MSK (0x00000001)
-#define ALT_SGDMA_CONTROL_IE_EOP_ENCOUNTERED_MSK (0x00000002)
-#define ALT_SGDMA_CONTROL_IE_DESC_COMPLETED_MSK (0x00000004)
-#define ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK (0x00000008)
-#define ALT_SGDMA_CONTROL_IE_GLOBAL_MSK (0x00000010)
-#define ALT_SGDMA_CONTROL_RUN_MSK (0x00000020)
-#define ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK (0x00000040)
-#define ALT_SGDMA_CONTROL_IE_MAX_DESC_PROCESSED_MSK (0x00000080)
-#define ALT_SGDMA_CONTROL_MAX_DESC_PROCESSED_MSK (0x0000FF00)
-#define ALT_SGDMA_CONTROL_SOFTWARERESET_MSK (0x00010000)
-#define ALT_SGDMA_CONTROL_PARK_MSK (0x00020000)
-#define ALT_SGDMA_CONTROL_CLEAR_INTERRUPT_MSK (0x80000000)
+#define ALT_SGDMA_STATUS_ERROR_MSK 0x00000001
+#define ALT_SGDMA_STATUS_EOP_ENCOUNTERED_MSK 0x00000002
+#define ALT_SGDMA_STATUS_DESC_COMPLETED_MSK 0x00000004
+#define ALT_SGDMA_STATUS_CHAIN_COMPLETED_MSK 0x00000008
+#define ALT_SGDMA_STATUS_BUSY_MSK 0x00000010
+
+#define ALT_SGDMA_CONTROL_IE_ERROR_MSK 0x00000001
+#define ALT_SGDMA_CONTROL_IE_EOP_ENCOUNTERED_MSK 0x00000002
+#define ALT_SGDMA_CONTROL_IE_DESC_COMPLETED_MSK 0x00000004
+#define ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK 0x00000008
+#define ALT_SGDMA_CONTROL_IE_GLOBAL_MSK 0x00000010
+#define ALT_SGDMA_CONTROL_RUN_MSK 0x00000020
+#define ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK 0x00000040
+#define ALT_SGDMA_CONTROL_IE_MAX_DESC_PROCESSED_MSK 0x00000080
+#define ALT_SGDMA_CONTROL_MAX_DESC_PROCESSED_MSK 0x0000FF00
+#define ALT_SGDMA_CONTROL_SOFTWARERESET_MSK 0x00010000
+#define ALT_SGDMA_CONTROL_PARK_MSK 0x00020000
+#define ALT_SGDMA_CONTROL_CLEAR_INTERRUPT_MSK 0x80000000
#define ALTERA_TSE_SGDMA_INTR_MASK (ALT_SGDMA_CONTROL_IE_CHAIN_COMPLETED_MSK \
| ALT_SGDMA_STATUS_DESC_COMPLETED_MSK \
@@ -140,11 +44,11 @@ struct phy_info {
* The following bit-offsets are expressed relative to the LSB of
* the control register bitfield.
*/
-#define ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK (0x00000001)
-#define ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK (0x00000002)
-#define ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK (0x00000004)
-#define ALT_SGDMA_DESCRIPTOR_CONTROL_ATLANTIC_CHANNEL_MSK (0x00000008)
-#define ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK (0x00000080)
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK 0x00000001
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK 0x00000002
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK 0x00000004
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_ATLANTIC_CHANNEL_MSK 0x00000008
+#define ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK 0x00000080
/*
* Descriptor status bit masks & offsets
@@ -153,15 +57,15 @@ struct phy_info {
* The following bit-offsets are expressed relative to the LSB of
* the status register bitfield.
*/
-#define ALT_SGDMA_DESCRIPTOR_STATUS_E_CRC_MSK (0x00000001)
-#define ALT_SGDMA_DESCRIPTOR_STATUS_E_PARITY_MSK (0x00000002)
-#define ALT_SGDMA_DESCRIPTOR_STATUS_E_OVERFLOW_MSK (0x00000004)
-#define ALT_SGDMA_DESCRIPTOR_STATUS_E_SYNC_MSK (0x00000008)
-#define ALT_SGDMA_DESCRIPTOR_STATUS_E_UEOP_MSK (0x00000010)
-#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MEOP_MSK (0x00000020)
-#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MSOP_MSK (0x00000040)
-#define ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK (0x00000080)
-#define ALT_SGDMA_DESCRIPTOR_STATUS_ERROR_MSK (0x0000007F)
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_CRC_MSK 0x00000001
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_PARITY_MSK 0x00000002
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_OVERFLOW_MSK 0x00000004
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_SYNC_MSK 0x00000008
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_UEOP_MSK 0x00000010
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MEOP_MSK 0x00000020
+#define ALT_SGDMA_DESCRIPTOR_STATUS_E_MSOP_MSK 0x00000040
+#define ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK 0x00000080
+#define ALT_SGDMA_DESCRIPTOR_STATUS_ERROR_MSK 0x0000007F
/*
* The SGDMA controller buffer descriptor allocates
@@ -170,11 +74,6 @@ struct phy_info {
* of padding directly above each address; each pad must
* be cleared when initializing a descriptor.
*/
-
-/*
- * Buffer Descriptor data structure
- *
- */
struct alt_sgdma_descriptor {
unsigned int *source; /* the address of data to be read. */
unsigned int source_pad;
@@ -196,7 +95,6 @@ struct alt_sgdma_descriptor {
} __packed_1_;
/* SG-DMA Control/Status Slave registers map */
-
struct alt_sgdma_registers {
unsigned int status;
unsigned int status_pad[3];
@@ -207,67 +105,66 @@ struct alt_sgdma_registers {
};
/* TSE Stuff */
-#define ALTERA_TSE_CMD_TX_ENA_MSK (0x00000001)
-#define ALTERA_TSE_CMD_RX_ENA_MSK (0x00000002)
-#define ALTERA_TSE_CMD_XON_GEN_MSK (0x00000004)
-#define ALTERA_TSE_CMD_ETH_SPEED_MSK (0x00000008)
-#define ALTERA_TSE_CMD_PROMIS_EN_MSK (0x00000010)
-#define ALTERA_TSE_CMD_PAD_EN_MSK (0x00000020)
-#define ALTERA_TSE_CMD_CRC_FWD_MSK (0x00000040)
-#define ALTERA_TSE_CMD_PAUSE_FWD_MSK (0x00000080)
-#define ALTERA_TSE_CMD_PAUSE_IGNORE_MSK (0x00000100)
-#define ALTERA_TSE_CMD_TX_ADDR_INS_MSK (0x00000200)
-#define ALTERA_TSE_CMD_HD_ENA_MSK (0x00000400)
-#define ALTERA_TSE_CMD_EXCESS_COL_MSK (0x00000800)
-#define ALTERA_TSE_CMD_LATE_COL_MSK (0x00001000)
-#define ALTERA_TSE_CMD_SW_RESET_MSK (0x00002000)
-#define ALTERA_TSE_CMD_MHASH_SEL_MSK (0x00004000)
-#define ALTERA_TSE_CMD_LOOPBACK_MSK (0x00008000)
+#define ALTERA_TSE_CMD_TX_ENA_MSK 0x00000001
+#define ALTERA_TSE_CMD_RX_ENA_MSK 0x00000002
+#define ALTERA_TSE_CMD_XON_GEN_MSK 0x00000004
+#define ALTERA_TSE_CMD_ETH_SPEED_MSK 0x00000008
+#define ALTERA_TSE_CMD_PROMIS_EN_MSK 0x00000010
+#define ALTERA_TSE_CMD_PAD_EN_MSK 0x00000020
+#define ALTERA_TSE_CMD_CRC_FWD_MSK 0x00000040
+#define ALTERA_TSE_CMD_PAUSE_FWD_MSK 0x00000080
+#define ALTERA_TSE_CMD_PAUSE_IGNORE_MSK 0x00000100
+#define ALTERA_TSE_CMD_TX_ADDR_INS_MSK 0x00000200
+#define ALTERA_TSE_CMD_HD_ENA_MSK 0x00000400
+#define ALTERA_TSE_CMD_EXCESS_COL_MSK 0x00000800
+#define ALTERA_TSE_CMD_LATE_COL_MSK 0x00001000
+#define ALTERA_TSE_CMD_SW_RESET_MSK 0x00002000
+#define ALTERA_TSE_CMD_MHASH_SEL_MSK 0x00004000
+#define ALTERA_TSE_CMD_LOOPBACK_MSK 0x00008000
/* Bits (18:16) = address select */
-#define ALTERA_TSE_CMD_TX_ADDR_SEL_MSK (0x00070000)
-#define ALTERA_TSE_CMD_MAGIC_ENA_MSK (0x00080000)
-#define ALTERA_TSE_CMD_SLEEP_MSK (0x00100000)
-#define ALTERA_TSE_CMD_WAKEUP_MSK (0x00200000)
-#define ALTERA_TSE_CMD_XOFF_GEN_MSK (0x00400000)
-#define ALTERA_TSE_CMD_CNTL_FRM_ENA_MSK (0x00800000)
-#define ALTERA_TSE_CMD_NO_LENGTH_CHECK_MSK (0x01000000)
-#define ALTERA_TSE_CMD_ENA_10_MSK (0x02000000)
-#define ALTERA_TSE_CMD_RX_ERR_DISC_MSK (0x04000000)
+#define ALTERA_TSE_CMD_TX_ADDR_SEL_MSK 0x00070000
+#define ALTERA_TSE_CMD_MAGIC_ENA_MSK 0x00080000
+#define ALTERA_TSE_CMD_SLEEP_MSK 0x00100000
+#define ALTERA_TSE_CMD_WAKEUP_MSK 0x00200000
+#define ALTERA_TSE_CMD_XOFF_GEN_MSK 0x00400000
+#define ALTERA_TSE_CMD_CNTL_FRM_ENA_MSK 0x00800000
+#define ALTERA_TSE_CMD_NO_LENGTH_CHECK_MSK 0x01000000
+#define ALTERA_TSE_CMD_ENA_10_MSK 0x02000000
+#define ALTERA_TSE_CMD_RX_ERR_DISC_MSK 0x04000000
/* Bits (30..27) reserved */
-#define ALTERA_TSE_CMD_CNT_RESET_MSK (0x80000000)
+#define ALTERA_TSE_CMD_CNT_RESET_MSK 0x80000000
-#define ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 (0x00040000)
-#define ALTERA_TSE_TX_CMD_STAT_OMIT_CRC (0x00020000)
+#define ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 0x00040000
+#define ALTERA_TSE_TX_CMD_STAT_OMIT_CRC 0x00020000
-#define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16 (0x02000000)
+#define ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16 0x02000000
#define ALT_TSE_SW_RESET_WATCHDOG_CNTR 10000
#define ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR 90000000
/* Command_Config Register Bit Definitions */
-
typedef volatile union __alt_tse_command_config {
unsigned int image;
struct {
unsigned int
transmit_enable:1, /* bit 0 */
receive_enable:1, /* bit 1 */
- pause_frame_xon_gen:1, /* bit 2 */
+ pause_frame_xon_gen:1, /* bit 2 */
ethernet_speed:1, /* bit 3 */
promiscuous_enable:1, /* bit 4 */
pad_enable:1, /* bit 5 */
- crc_forward:1, /* bit 6 */
- pause_frame_forward:1, /* bit 7 */
+ crc_forward:1, /* bit 6 */
+ pause_frame_forward:1, /* bit 7 */
pause_frame_ignore:1, /* bit 8 */
set_mac_address_on_tx:1, /* bit 9 */
halfduplex_enable:1, /* bit 10 */
- excessive_collision:1, /* bit 11 */
+ excessive_collision:1, /* bit 11 */
late_collision:1, /* bit 12 */
software_reset:1, /* bit 13 */
multicast_hash_mode_sel:1, /* bit 14 */
loopback_enable:1, /* bit 15 */
src_mac_addr_sel_on_tx:3, /* bit 18:16 */
- magic_packet_detect:1, /* bit 19 */
+ magic_packet_detect:1, /* bit 19 */
sleep_mode_enable:1, /* bit 20 */
wake_up_request:1, /* bit 21 */
pause_frame_xoff_gen:1, /* bit 22 */
@@ -281,7 +178,6 @@ typedef volatile union __alt_tse_command_config {
} __packed_1_ alt_tse_command_config;
/* Tx_Cmd_Stat Register Bit Definitions */
-
typedef volatile union __alt_tse_tx_cmd_stat {
unsigned int image;
struct {
@@ -294,7 +190,6 @@ typedef volatile union __alt_tse_tx_cmd_stat {
} alt_tse_tx_cmd_stat;
/* Rx_Cmd_Stat Register Bit Definitions */
-
typedef volatile union __alt_tse_rx_cmd_stat {
unsigned int image;
struct {
@@ -342,7 +237,6 @@ struct alt_tse_mdio {
};
/* MAC register Space */
-
struct alt_tse_mac {
unsigned int megacore_revision;
unsigned int scratch_pad;
@@ -441,52 +335,19 @@ struct alt_tse_mac {
unsigned int reservedx320[56];
};
-/* flags: TSE MII modes */
-/* GMII/MII = 0 */
-/* RGMII = 1 */
-/* RGMII_ID = 2 */
-/* RGMII_TXID = 3 */
-/* RGMII_RXID = 4 */
-/* SGMII = 5 */
struct altera_tse_priv {
- char devname[16];
volatile struct alt_tse_mac *mac_dev;
volatile struct alt_sgdma_registers *sgdma_rx;
volatile struct alt_sgdma_registers *sgdma_tx;
- unsigned int rx_sgdma_irq;
- unsigned int tx_sgdma_irq;
- unsigned int has_descriptor_mem;
- unsigned int descriptor_mem_base;
- unsigned int descriptor_mem_size;
+ unsigned int rx_fifo_depth;
+ unsigned int tx_fifo_depth;
volatile struct alt_sgdma_descriptor *rx_desc;
volatile struct alt_sgdma_descriptor *tx_desc;
- volatile unsigned char *rx_buf;
- struct phy_info *phyinfo;
+ unsigned int rx_cur;
unsigned int phyaddr;
- unsigned int flags;
- unsigned int link;
- unsigned int duplexity;
- unsigned int speed;
+ unsigned int interface;
+ struct phy_device *phydev;
+ struct mii_dev *bus;
};
-/* Phy stuff continued */
-/*
- * struct phy_cmd: A command for reading or writing a PHY register
- *
- * mii_reg: The register to read or write
- *
- * mii_data: For writes, the value to put in the register.
- * A value of -1 indicates this is a read.
- *
- * funct: A function pointer which is invoked for each command.
- * For reads, this function will be passed the value read
- * from the PHY, and process it.
- * For writes, the result of this function will be written
- * to the PHY register
- */
-struct phy_cmd {
- uint mii_reg;
- uint mii_data;
- uint(*funct) (uint mii_reg, struct altera_tse_priv *priv);
-};
#endif /* _ALTERA_TSE_H_ */
diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h
index 11be6e1..76c5244 100644
--- a/include/configs/nios2-generic.h
+++ b/include/configs/nios2-generic.h
@@ -33,6 +33,14 @@
#define CONFIG_SYS_MAX_FLASH_SECT 512
/*
+ * MII/PHY
+ */
+#define CONFIG_CMD_MII 1
+#define CONFIG_PHY_GIGE 1
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
+#define CONFIG_PHY_MARVELL 1
+
+/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
--
2.1.4
More information about the U-Boot
mailing list