[U-Boot] [PATCH] configs: ls1021atwr: Enable ID EEPROM for SD boot

[Yao Yuan]

Hi Sinan Akman,

Yes, I mean the Rev 1.0 silicon.
Sorry, I can't guarantee that there aren't any boards with Rev1.0 silicon are in user's hands.  
Because we have also delivery very little board with Rev1.0 silicon to  customer  or developer for developing, assessing and verifying in the early stages. 
Also we haven't support Rev1.0 in our SDK now.

Thanks.

Best Regards,
Yuan Yao

> -----Original Message-----
> From: Sinan Akman [mailto:sinan at writeme.com]
> Sent: Friday, October 16, 2015 3:37 AM
> To: Sun York-R58495 <yorksun at freescale.com>; Yuan Yao-B46683
> <yao.yuan at freescale.com>; Wang Huan-B18965 <alison.wang at freescale.com>
> Cc: u-boot at lists.denx.de
> Subject: Re: [U-Boot] [PATCH] configs: ls1021atwr: Enable ID EEPROM for SD
> boot
> 
> 
>    Hi Yuan
> 
> On 15/10/15 12:40 PM, York Sun wrote:
> >
> >
> > On 10/15/2015 12:55 AM, Yuan Yao-B46683 wrote:
> >> Hi york,
> >>
> >> The earlier SoC is just LS1021a rev1.0, but rev1.0 haven't delivery to the
> customer.
> >> Also the rev1.0 has since gone out of production.
> >> So we don't have necessary to support rev1.0 because no one will or
> possibly to use rev1.0.
> 
>    Just to make this clear, the boards we bought all show :
> 
> CPU:   Freescale LayerScape LS1021E, Version: 1.0, (0x87081110)
> 
>    When you mention "rev1.0 haven't delivery to the customer" are you not
> referring to Rev 1.0 silicon ?
> 
>    Regards
>    Sinan Akman
> 
> >>
> >
> > OK.
> >
> > York
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
> >