[U-Boot] [Patch V6 07/18] net: fm: bug fix when CONFIG_PHYLIB not defined
Gong Qianyu
b52263 at rhuath.am.freescale.net
Mon Oct 19 13:58:58 CEST 2015
From: Shaohui Xie <Shaohui.Xie at freescale.com>
codes related to phylib operations should be wrapped by CONFIG_PHYLIB.
Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong at freescale.com>
---
V6:
- Fix all codes related to phylib to be wrapped by CONFIG_PHYLIB.
V5:
- No change.
V4:
- No change.
V3:
- New patch.
drivers/net/fm/eth.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index d7d064b..e262859 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -95,6 +95,7 @@ static void dtsec_init_phy(struct eth_device *dev)
dtsec_configure_serdes(fm_eth);
}
+#ifdef CONFIG_PHYLIB
static int tgec_is_fibre(struct eth_device *dev)
{
struct fm_eth *fm = dev->priv;
@@ -105,6 +106,7 @@ static int tgec_is_fibre(struct eth_device *dev)
return hwconfig_arg_cmp(phyopt, "xfi");
}
#endif
+#endif
static u16 muram_readw(u16 *addr)
{
@@ -483,8 +485,10 @@ static void fm_eth_halt(struct eth_device *dev)
/* disable bmi Rx port */
bmi_rx_port_disable(fm_eth->rx_port);
+#ifdef CONFIG_PHYLIB
if (fm_eth->phydev)
phy_shutdown(fm_eth->phydev);
+#endif
}
static int fm_eth_send(struct eth_device *dev, void *buf, int len)
@@ -658,13 +662,15 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
static int init_phy(struct eth_device *dev)
{
struct fm_eth *fm_eth = dev->priv;
+#ifdef CONFIG_PHYLIB
struct phy_device *phydev = NULL;
u32 supported;
+#endif
-#ifdef CONFIG_PHYLIB
if (fm_eth->type == FM_ETH_1G_E)
dtsec_init_phy(dev);
+#ifdef CONFIG_PHYLIB
if (fm_eth->bus) {
phydev = phy_connect(fm_eth->bus, fm_eth->phyaddr, dev,
fm_eth->enet_if);
--
2.1.0.27.g96db324
More information about the U-Boot
mailing list