[U-Boot] [Patch V6 10/18] net/fm: fix MDIO controller base on FMAN2
Gong Qianyu
b52263 at rhuath.am.freescale.net
Mon Oct 19 13:59:01 CEST 2015
From: Shaohui Xie <Shaohui.Xie at freescale.com>
MDIO controller base on FMAN2 was defined as CONFIG_SYS_FSL_FM2_ADDR
plus offset, but CONFIG_SYS_FSL_FM2_ADDR only defined when there are two
FMANs, so we should only define MDIO controller base on FMAN2 when there
is FMAN2.
Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong at freescale.com>
---
V6:
- No change.
V5:
- No change.
V4:
- No change.
V3:
- No change.
V2:
- No change.
include/fm_eth.h | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/include/fm_eth.h b/include/fm_eth.h
index 3e1b9f4..d43f801 100644
--- a/include/fm_eth.h
+++ b/include/fm_eth.h
@@ -45,8 +45,10 @@ enum fm_eth_type {
#ifdef CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfc000)
#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfd000)
+#if (CONFIG_SYS_NUM_FMAN == 2)
#define CONFIG_SYS_FM2_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfc000)
#define CONFIG_SYS_FM2_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfd000)
+#endif
#else
#define CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xe1120)
#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xf1000)
@@ -89,6 +91,7 @@ enum fm_eth_type {
offsetof(struct ccsr_fman, memac[n-1]),\
}
#else
+#if (CONFIG_SYS_NUM_FMAN == 2)
#define FM_TGEC_INFO_INITIALIZER(idx, n) \
{ \
FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM2_TGEC_MDIO_ADDR) \
@@ -101,6 +104,20 @@ enum fm_eth_type {
.compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
offsetof(struct ccsr_fman, memac[n-1+8]),\
}
+#else
+#define FM_TGEC_INFO_INITIALIZER(idx, n) \
+{ \
+ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \
+ .index = idx, \
+ .num = n - 1, \
+ .type = FM_ETH_10G_E, \
+ .port = FM##idx##_10GEC##n, \
+ .rx_port_id = RX_PORT_10G_BASE + n - 1, \
+ .tx_port_id = TX_PORT_10G_BASE + n - 1, \
+ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
+ offsetof(struct ccsr_fman, memac[n-1+8]),\
+}
+#endif
#endif
#if (CONFIG_SYS_NUM_FM1_10GEC >= 3)
--
2.1.0.27.g96db324
More information about the U-Boot
mailing list