[U-Boot] [PATCH 3/3] x86: Added support for Advantech SOM-6896

Simon Glass sjg at chromium.org
Mon Oct 19 16:44:23 CEST 2015


Hi George,

On 19 October 2015 at 08:29, George McCollister
<george.mccollister at gmail.com> wrote:
> Simon,
>
> On Thu, Oct 15, 2015 at 8:25 AM, Simon Glass <sjg at google.com> wrote:
>> Hi Bin,
>>
>> On Monday, 12 October 2015, Bin Meng <bmeng.cn at gmail.com> wrote:
>>>
>>> Hi George,
>>>
>>> On Tue, Oct 13, 2015 at 10:52 AM, George McCollister
>>> <george.mccollister at gmail.com> wrote:
>>> > On Mon, Oct 12, 2015 at 7:48 PM, Bin Meng <bmeng.cn at gmail.com> wrote:
>>> >> Hi George,
>>> >>
>>> >> On Tue, Oct 13, 2015 at 2:30 AM, George McCollister
>>> >> <george.mccollister at gmail.com> wrote:
>>> >>> On Mon, Oct 12, 2015 at 8:34 AM, George McCollister
>>> >>> <george.mccollister at gmail.com> wrote:
>>> >>>> On Fri, Oct 9, 2015 at 10:31 PM, Bin Meng <bmeng.cn at gmail.com> wrote:
>>> >>>>> Hi George,
>>> >>>>>
>>> >>>>> On Sat, Oct 10, 2015 at 5:54 AM, George McCollister
>>> >>>>> <george.mccollister at gmail.com> wrote:
>>> >>>>>> Advantech SOM-6896 is a Broadwell U based COM Express Compact Module
>>> >>>>>> Type 6. This patch adds support for it as a coreboot payload.
>>> >>>>>>
>>> >>>>>> On board SATA and SPI are functional. On board Ethernet isn't functional
>>> >>>>>> but since it's optional and ties up a PCIe x4 that is otherwise brought
>>> >>>>>> out, this isn't a concern at the moment. USB doesn't work since the
>>> >>>>>> xHCI driver appears to be broken.
>>> >>>>>>
>>> >>>>>> Signed-off-by: George McCollister <george.mccollister at gmail.com>
>>> >>>>>> ---
>>> >>>>>>  arch/x86/dts/Makefile      |  3 ++-
>>> >>>>>>  arch/x86/dts/som-6896.dts  | 43 +++++++++++++++++++++++++++++++++++++++++++
>>> >>>>>>  include/configs/som-6896.h | 38 ++++++++++++++++++++++++++++++++++++++
>>> >>>>>>  3 files changed, 83 insertions(+), 1 deletion(-)
>>> >>>>>>  create mode 100644 arch/x86/dts/som-6896.dts
>>> >>>>>>  create mode 100644 include/configs/som-6896.h
>>> >>>>>>
>>> >>>>>> diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile
>>> >>>>>> index 71595c7..9fa2e21 100644
>>> >>>>>> --- a/arch/x86/dts/Makefile
>>> >>>>>> +++ b/arch/x86/dts/Makefile
>>> >>>>>> @@ -6,7 +6,8 @@ dtb-y += bayleybay.dtb \
>>> >>>>>>         galileo.dtb \
>>> >>>>>>         minnowmax.dtb \
>>> >>>>>>         qemu-x86_i440fx.dtb \
>>> >>>>>> -       qemu-x86_q35.dtb
>>> >>>>>> +       qemu-x86_q35.dtb \
>>> >>>>>> +       som-6896.dtb
>>> >>>>>>
>>> >>>>>>  targets += $(dtb-y)
>>> >>>>>>
>>> >>>>>> diff --git a/arch/x86/dts/som-6896.dts b/arch/x86/dts/som-6896.dts
>>> >>>>>> new file mode 100644
>>> >>>>>> index 0000000..ad904c9
>>> >>>>>> --- /dev/null
>>> >>>>>> +++ b/arch/x86/dts/som-6896.dts
>>> >>>>>> @@ -0,0 +1,43 @@
>>> >>>>>> +/dts-v1/;
>>> >>>>>> +
>>> >>>>>> +/include/ "skeleton.dtsi"
>>> >>>>>> +/include/ "serial.dtsi"
>>> >>>>>> +/include/ "rtc.dtsi"
>>> >>>>>> +
>>> >>>>>> +/ {
>>> >>>>>> +       model = "Advantech SOM-6896";
>>> >>>>>> +       compatible = "advantech,som-6896", "intel,broadwell";
>>> >>>>>> +
>>> >>>>>> +       aliases {
>>> >>>>>> +               spi0 = "/spi";
>>> >>>>>> +       };
>>> >>>>>> +
>>> >>>>>> +       config {
>>> >>>>>> +              silent_console = <0>;
>>> >>>>>> +       };
>>> >>>>>> +
>>> >>>>>> +       chosen {
>>> >>>>>> +               stdout-path = "/serial";
>>> >>>>>> +       };
>>> >>>>>> +
>>> >>>>>> +       pci {
>>> >>>>>> +               compatible = "intel,pci-broadwell", "pci-x86";
>>> >>>>>
>>> >>>>> I would just describe it as "pci-x86" as Intel chipset PCI is compatible.
>>> >>>> Okay
>>> >>>>>
>>> >>>>>> +               #address-cells = <3>;
>>> >>>>>> +               #size-cells = <2>;
>>> >>>>>> +               u-boot,dm-pre-reloc;
>>> >>>>>> +               ranges = <0x02000000 0x0 0xe0000000 0xe0000000 0 0x10000000
>>> >>>>>
>>> >>>>> Can you verify 0xe0000000 is not configured by coreboot as the PCIe
>>> >>>>> ECAM base address?
>>> >>>> I'll try to verify these, it's quite possible they are incorrect.
>>> >>>
>>> >>> CONFIG_MMCONF_BASE_ADDRESS is set to 0xf0000000 in coreboot.
>>> >>>
>>> >>> For prefmem/mem coreboot is showing:
>>> >>> DOMAIN: 0000 mem: base:d0000000 size:1111f120 align:28 gran:0 limit:efffffff
>>> >>> PCI: 00:02.0 18 *  [0xd0000000 - 0xdfffffff] prefmem
>>> >>> PCI: 00:02.0 10 *  [0xe0000000 - 0xe0ffffff] mem
>>> >>> PCI: 00:1c.0 20 *  [0xe1000000 - 0xe10fffff] mem
>>> >>> PCI: 00:14.0 10 *  [0xe1100000 - 0xe110ffff] mem
>>> >>> PCI: 00:1f.2 24 *  [0xe1110000 - 0xe1117fff] mem
>>> >>> PCI: 00:1b.0 10 *  [0xe1118000 - 0xe111bfff] mem
>>> >>> PCI: 00:15.0 10 *  [0xe111c000 - 0xe111cfff] mem
>>> >>> PCI: 00:15.0 14 *  [0xe111d000 - 0xe111dfff] mem
>>> >>> PCI: 00:1f.6 10 *  [0xe111e000 - 0xe111efff] mem
>>> >>> PCI: 00:1f.3 10 *  [0xe111f000 - 0xe111f0ff] mem
>>> >>> PCI: 00:16.0 10 *  [0xe111f100 - 0xe111f11f] mem
>>> >>> DOMAIN: 0000 mem: next_base: e111f120 size: 1111f120 align: 28 gran: 0 done
>>> >>> PCI: 00:1c.0 prefmem: base:efffffff size:0 align:20 gran:20 limit:efffffff
>>> >>> PCI: 00:1c.0 prefmem: next_base: efffffff size: 0 align: 20 gran: 20 done
>>> >>> PCI: 00:1c.0 mem: base:e1000000 size:100000 align:20 gran:20 limit:e10fffff
>>> >>> PCI: 01:00.0 14 *  [0xe1000000 - 0xe107ffff] mem
>>> >>> PCI: 01:00.0 30 *  [0xe1080000 - 0xe10bffff] mem
>>> >>> PCI: 01:00.0 10 *  [0xe10c0000 - 0xe10dffff] mem
>>> >>> PCI: 01:00.0 1c *  [0xe10e0000 - 0xe10e3fff] mem
>>> >>> PCI: 00:1c.0 mem: next_base: e10e4000 size: 100000 align: 20 gran: 20 done
>>> >>> PCI: 00:1c.1 prefmem: base:efffffff size:0 align:20 gran:20 limit:efffffff
>>> >>> PCI: 00:1c.1 prefmem: next_base: efffffff size: 0 align: 20 gran: 20 done
>>> >>> PCI: 00:1c.1 mem: base:efffffff size:0 align:20 gran:20 limit:efffffff
>>> >>> PCI: 00:1c.1 mem: next_base: efffffff size: 0 align: 20 gran: 20 done
>>> >>> PCI: 00:1c.2 prefmem: base:efffffff size:0 align:20 gran:20 limit:efffffff
>>> >>> PCI: 00:1c.2 prefmem: next_base: efffffff size: 0 align: 20 gran: 20 done
>>> >>> PCI: 00:1c.2 mem: base:efffffff size:0 align:20 gran:20 limit:efffffff
>>> >>> PCI: 00:1c.2 mem: next_base: efffffff size: 0 align: 20 gran: 20 done
>>> >>> PCI: 00:1c.3 prefmem: base:efffffff size:0 align:20 gran:20 limit:efffffff
>>> >>> PCI: 00:1c.3 prefmem: next_base: efffffff size: 0 align: 20 gran: 20 done
>>> >>> PCI: 00:1c.3 mem: base:efffffff size:0 align:20 gran:20 limit:efffffff
>>> >>> PCI: 00:1c.3 mem: next_base: efffffff size: 0 align: 20 gran: 20 done
>>> >>> PCI: 00:1c.4 prefmem: base:efffffff size:0 align:20 gran:20 limit:efffffff
>>> >>> PCI: 00:1c.4 prefmem: next_base: efffffff size: 0 align: 20 gran: 20 done
>>> >>> PCI: 00:1c.4 mem: base:efffffff size:0 align:20 gran:20 limit:efffffff
>>> >>> PCI: 00:1c.4 mem: next_base: efffffff size: 0 align: 20 gran: 20 done
>>> >>>
>>> >>> Based on that I think the prefetchable mem region and the mem region
>>> >>> are correct.
>>> >>
>>> >> Thanks for checking this
>>> >>
>>> >>>
>>> >>> For io coreboot is showing:
>>> >>> DOMAIN: 0000 io: base:1900 size:1078 align:12 gran:0 limit:ffff
>>> >>> PCI: 00:1c.0 1c *  [0x2000 - 0x2fff] io
>>> >>> PCI: 00:02.0 20 *  [0x3000 - 0x303f] io
>>> >>> PCI: 00:1f.2 20 *  [0x3040 - 0x305f] io
>>> >>> PCI: 00:1f.2 10 *  [0x3060 - 0x3067] io
>>> >>> PCI: 00:1f.2 18 *  [0x3068 - 0x306f] io
>>> >>> PCI: 00:1f.2 14 *  [0x3070 - 0x3073] io
>>> >>> PCI: 00:1f.2 1c *  [0x3074 - 0x3077] io
>>> >>> DOMAIN: 0000 io: next_base: 3078 size: 1078 align: 12 gran: 0 done
>>> >>> PCI: 00:1c.0 io: base:2000 size:1000 align:12 gran:12 limit:2fff
>>> >>> PCI: 01:00.0 18 *  [0x2000 - 0x201f] io
>>> >>> PCI: 00:1c.0 io: next_base: 2020 size: 1000 align: 12 gran: 12 done
>>> >>> PCI: 00:1c.1 io: base:ffff size:0 align:12 gran:12 limit:ffff
>>> >>> PCI: 00:1c.1 io: next_base: ffff size: 0 align: 12 gran: 12 done
>>> >>> PCI: 00:1c.2 io: base:ffff size:0 align:12 gran:12 limit:ffff
>>> >>> PCI: 00:1c.2 io: next_base: ffff size: 0 align: 12 gran: 12 done
>>> >>> PCI: 00:1c.3 io: base:ffff size:0 align:12 gran:12 limit:ffff
>>> >>> PCI: 00:1c.3 io: next_base: ffff size: 0 align: 12 gran: 12 done
>>> >>> PCI: 00:1c.4 io: base:ffff size:0 align:12 gran:12 limit:ffff
>>> >>> PCI: 00:1c.4 io: next_base: ffff size: 0 align: 12 gran: 12 done
>>> >>>
>>> >>> Based on that I'm thinking this:
>>> >>> 0x01000000 0x0 0x1000 0x1000 0 0xefff>
>>> >>> Should actually be:
>>> >>> 0x01000000 0x0 0x1900 0x1900 0 0xe700>;
>>> >>>
>>> >>
>>> >> I think having I/O address start from 0x1000 does not have a problem.
>>> >> All the common known legacy I/O port addresses are below 0x1000. Are
>>> >> there any special I/O chipset that occupies 0x1000 - 0x1900? Anyway,
>>> >> setting it to 0x1900 in U-Boot is not a big deal.
>>> >
>>> > Before changing this I had to move the ACPI base address configured by
>>> > coreboot (default 0x1000) to a different address for Linux to work
>>> > with ACPI. One of the reviewers to my coreboot submission asked me to
>>> > look into why this was required and I found that I was able to use the
>>> > default ACPI base address of 0x1000 when I moved this from 0x1000 to
>>> > 0x1900 in u-boot. Since changing the ACPI base address in coreboot
>>> > required a patch that touched the chipset headers and required me to
>>> > add a configuration setting they'd like me to leave it out since it's
>>> > not necessary.
>>> >
>>>
>>> Ah, yes! Sorry I was wrongly saying 0x1000, but I should really say
>>> 0x2000 as the I/O start address for U-Boot. 0x2000 is the I/O start
>>> address which is used by other x86 boards. No need to change coreboot.
>>>
>>> > On a separate note I just noticed I forgot to rename som-6896 to
>>> > broadwell_som-6896 as suggested. I'll send an updated patch series in
>>> > the morning with that change.
>>> >
>>>
>>> I think currently this name (som-6896) is fine. I think a future
>>> single patch to rename all x86 boards would be better. Also we may
>>> need change config.h and defconfig file names as well.
>>
>> We tend to allow any config/board name, it is just the device tree
>> that has the convention I mentioned.
> Do you want me to resend the patch with the DT renamed to
> broadwell_som-6896.dts?

Yes please

> Do you want me to change the I/O start address to 0x2000 from 0x1900
> (0x1900 seems to be working fine)?

I think Bin requested this - yes let's go with 0x2000.

>
> Is there anything else I'm missing before it'll be acceptable to merge?

Not that I know of.

Regards,
Simon


More information about the U-Boot mailing list