[U-Boot] Remove sparc archiecture?

[Francois Retief]

> -----Original Message-----
> From: Tom Rini [mailto:trini at konsulko.com]
> Sent: 19 October 2015 05:47 PM
> To: Francois Retief <fgretief at spaceteq.co.za>
> Subject: Re: [U-Boot] Remove sparc archiecture?
>
> On Mon, Oct 19, 2015 at 02:54:57PM +0000, Francois Retief wrote:
> > Hallo Daniel,
> >
> > > -----Original Message-----
> > > From: Daniel Hellstrom [mailto:daniel at gaisler.com]
> > > Sent: 18 October 2015 11:30 PM
> > > To: Masahiro Yamada <yamada.masahiro at socionext.com>
> > > Subject: Re: [U-Boot] Remove sparc archiecture?
...
> > > Nowadays there are LEON GCC targets mcpu=leon,leon3,leon3v7 so it
> should
> > > be possible to setup a working toolchain based on GCC-4.9 which we use
> > > for Linux and RTEMS. In the past I've used a GCC-4.4 toolchain from
> > > Cobham Gaisler.
...
> > Will rebase my patch set to the latest release this week and resend them
> for review.
> > Masahiro, what version of GCC is prefered (if any) for the next release  of
> U-Boot.
> > I am currently using the GCC-4.4 toolchain from Cobham Gaisler.
>
> Any semi-modern toolchain is fine with me.  Can you point me at the 4.4
> toolchain and I'll put sparc back into my build-test cycle?  Thanks!

I have been using this compiler up to now:
  http://www.gaisler.com/anonftp/bcc/bin/linux/sparc-elf-4.4.2-1.0.44.tar.bz2

Daniel is that the one you have been refering to?

Regards,
  Francois


________________________________
Disclaimer and confidentiality note – refer to our website for further details: www.spaceteq.co.za <http://www.spaceteq.co.za/home/emaildisclaimer/>