[U-Boot] [PATCH 2/2] ARM: dra7xx_evm: Add DFU support for qspi flash

[Lukasz Majewski]

Hi Vignesh,

> Hi Lukasz,
> 
> On 10/20/2015 04:07 PM, Lukasz Majewski wrote:
> > Hi Vignesh,
> > 
> >> This adds support to update firmware on qspi flash using DFU.
> >>
> >> On device:
> >> => setenv dfu_alt_info ${dfu_alt_info_qspi}
> >> => dfu 0 sf 0:0
> >>
> >> On host:
> >> $ sudo dfu-util -l
> >> $ sudo dfu-util -D MLO -a MLO
> >> $ sudo dfu-util -D u-boot.img -a u-boot.img
> > 
> > This patch series seems ok. I just have one question regarding
> > dfu-util:
> > 
> > sudo dfu-util -D MLO -a MLO
> > 
> > Is the above correct?
> > 
> > Shouldn't it be sudo dfu-util -a 0 -D MLO 
> > where alt setting 0 corresponds to MLO?
> > 
> 
> According to man page of dfu-util 0.5 (supports DFU v1.0):
> "-a"  can be used Specify the Altsetting of the DFU Interface by name
> or by number
> 
> So since "MLO" is the name for alt setting 0 both
> sudo dfu-util -D MLO -a MLO  and
> sudo dfu-util -a 0 -D MLO  are correct.
> 
> I used the above format as its easier for reading. Thanks!

I'm using dfu-util for few years now and I was not aware of this :-).

I will test this patch set and then submit PR to Marek.

Thanks for your work!

> 
> >>
> >> Signed-off-by: Vignesh R <vigneshr at ti.com>
> >> ---
> >>  include/configs/dra7xx_evm.h | 16 +++++++++++++++-
> >>  1 file changed, 15 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/include/configs/dra7xx_evm.h
> >> b/include/configs/dra7xx_evm.h index 6e32de854619..cb9544b49efb
> >> 100644 --- a/include/configs/dra7xx_evm.h
> >> +++ b/include/configs/dra7xx_evm.h
> >> @@ -82,11 +82,24 @@
> >>  	"fdt ram 0x80f80000 0x80000;" \
> >>  	"ramdisk ram 0x81000000 0x4000000\0"
> >>  
> >> +#define DFU_ALT_INFO_QSPI \
> >> +	"dfu_alt_info_qspi=" \
> >> +	"MLO raw 0x0 0x010000;" \
> >> +	"MLO.backup1 raw 0x010000 0x010000;" \
> >> +	"MLO.backup2 raw 0x020000 0x010000;" \
> >> +	"MLO.backup3 raw 0x030000 0x010000;" \
> >> +	"u-boot.img raw 0x040000 0x0100000;" \
> >> +	"u-boot-spl-os raw 0x140000 0x080000;" \
> >> +	"u-boot-env raw 0x1C0000 0x010000;" \
> >> +	"u-boot-env.backup raw 0x1D0000 0x010000;" \
> >> +	"kernel raw 0x1E0000 0x800000\0"
> >> +
> >>  #define DFUARGS \
> >>  	"dfu_bufsiz=0x10000\0" \
> >>  	DFU_ALT_INFO_MMC \
> >>  	DFU_ALT_INFO_EMMC \
> >> -	DFU_ALT_INFO_RAM
> >> +	DFU_ALT_INFO_RAM \
> >> +	DFU_ALT_INFO_QSPI
> >>  
> >>  /* Fastboot */
> >>  #define CONFIG_USB_FUNCTION_FASTBOOT
> >> @@ -207,6 +220,7 @@
> >>  
> >>  #define CONFIG_DFU_MMC
> >>  #define CONFIG_DFU_RAM
> >> +#define CONFIG_DFU_SF
> >>  
> >>  /* SATA */
> >>  #define CONFIG_BOARD_LATE_INIT
> > 
> > 
> > 
> 



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group