[U-Boot] [PATCH] mmc: fsl_esdhc: fix mmc read/write error on T4160/T4080

Yangbo Lu yangbo.lu at freescale.com
Tue Oct 20 10:33:56 CEST 2015


Fill the right command type when using CMD12 to stop data transfer.

Signed-off-by: Yangbo Lu <yangbo.lu at freescale.com>
---
 drivers/mmc/fsl_esdhc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 0b37002..69c0728 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -106,7 +106,8 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
 		xfertyp |= XFERTYP_RSPTYP_48;
 
 #if defined(CONFIG_MX53) || defined(CONFIG_PPC_T4240) || \
-	defined(CONFIG_LS102XA) || defined(CONFIG_LS2085A)
+	defined(CONFIG_LS102XA) || defined(CONFIG_LS2085A) \
+	defined(CONFIG_PPC_T4160) || defined(CONFIG_PPC_T4080)
 	if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
 		xfertyp |= XFERTYP_CMDTYP_ABORT;
 #endif
-- 
2.1.0.27.g96db324



More information about the U-Boot mailing list