[U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4

[Siarhei Siamashka]

On Mon, 31 Aug 2015 00:33:16 +0530
Anand Moon <linux.amoon at gmail.com> wrote:

> At the last moment I got this to work on my odroidxu3 board.
> 
> One problem I would like to address out is usb smsc95xx ethernet is not
> getting started at the boot.
> 
> # usb start                   /* command failed at the start */
> ------------------------------------------------------------------------------------------------------
> U-Boot 2015.10-rc2-00226-g7dbe336 (Aug 30 2015 - 23:41:27 +0530) for
> ODROID-XU3
> 
> CPU:   Exynos5422 @ 800 MHz
> Model: Odroid XU3 based on EXYNOS5422
> Board: Odroid XU3 based on EXYNOS5422
> Model: xu3
> DRAM:  2 GiB
> MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
> *** Warning - bad CRC, using default environment
> 
> In:    serial
> Out:   serial
> Err:   serial
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> starting USB...
> USB0:   USB EHCI 1.00
> USB1:   Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.00
> USB2:   Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.00
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 1 for devices... 1 USB Device(s) found
> scanning bus 2 for devices... 1 USB Device(s) found
>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
> No ethernet found.
> missing environment variable: pxeuuid
> missing environment variable: bootfile
> -----------------------------------------------------------------------------------------

Hi Anand,

This looks like it might be the same problem as
    http://lists.denx.de/pipermail/u-boot/2015-October/230827.html

Simon Glass asked if this also happens on XU3, so maybe you could
test the same workaround on your board and provide feedback?

-- 
Best regards,
Siarhei Siamashka