[U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4

Anand Moon linux.amoon at gmail.com
Wed Oct 21 11:57:38 CEST 2015


Hi Siarhei ,

On 21 October 2015 at 07:28, Siarhei Siamashka
<siarhei.siamashka at gmail.com> wrote:
> On Mon, 31 Aug 2015 00:33:16 +0530
> Anand Moon <linux.amoon at gmail.com> wrote:
>
>> At the last moment I got this to work on my odroidxu3 board.
>>
>> One problem I would like to address out is usb smsc95xx ethernet is not
>> getting started at the boot.
>>
>> # usb start                   /* command failed at the start */
>> ------------------------------------------------------------------------------------------------------
>> U-Boot 2015.10-rc2-00226-g7dbe336 (Aug 30 2015 - 23:41:27 +0530) for
>> ODROID-XU3
>>
>> CPU:   Exynos5422 @ 800 MHz
>> Model: Odroid XU3 based on EXYNOS5422
>> Board: Odroid XU3 based on EXYNOS5422
>> Model: xu3
>> DRAM:  2 GiB
>> MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
>> *** Warning - bad CRC, using default environment
>>
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   No ethernet found.
>> Hit any key to stop autoboot:  0
>> switch to partitions #0, OK
>> mmc0 is current device
>> Scanning mmc 0:1...
>> starting USB...
>> USB0:   USB EHCI 1.00
>> USB1:   Register 2000140 NbrPorts 2
>> Starting the controller
>> USB XHCI 1.00
>> USB2:   Register 2000140 NbrPorts 2
>> Starting the controller
>> USB XHCI 1.00
>> scanning bus 0 for devices... 1 USB Device(s) found
>> scanning bus 1 for devices... 1 USB Device(s) found
>> scanning bus 2 for devices... 1 USB Device(s) found
>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
>> No ethernet found.
>> missing environment variable: pxeuuid
>> missing environment variable: bootfile
>> -----------------------------------------------------------------------------------------
>
> Hi Anand,
>
> This looks like it might be the same problem as
>     http://lists.denx.de/pipermail/u-boot/2015-October/230827.html
>
> Simon Glass asked if this also happens on XU3, so maybe you could
> test the same workaround on your board and provide feedback?
>
> --

Odroid u3 also has the same problem
---------------------------------------------------------
U-Boot 2015.10-rc5-00030-gac6a532-dirty (Oct 20 2015 - 01:37:27 +1030)

CPU:   Exynos4412 @ 1 GHz
Model: Odroid based on Exynos4412
Board: Odroid based on Exynos4412
Model: u3
DRAM:  2 GiB
LDO20 at VDDQ_EMMC_1.8V: set 1800000 uV; enabling
LDO22 at VDDQ_EMMC_2.8V: set 2800000 uV; enabling
LDO21 at TFLASH_2.8V: set 2800000 uV; enabling
MMC:   SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
*** Warning - bad CRC, using default environment

Net:   No ethernet found.
Hit any key to stop autoboot:  0
Odroid # setenv usbethaddr 02:DE:AD:BE:EF:FF
Odroid # usb start
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
Odroid #
---------------------------------------------------------

-Anand Moon
> Best regards,
> Siarhei Siamashka


More information about the U-Boot mailing list