[U-Boot] TI8148 EVM

[Brian Hutchinson]

On Oct 22, 2015 7:21 AM, "Tom Rini" <trini at konsulko.com> wrote:
>
> On Thu, Oct 22, 2015 at 12:12:32PM +0100, Lad, Prabhakar wrote:
>
> > Hi Tom,
> >
> > I was trying the latest master branch for ti8148 evm to boot from SD
> > card, following are the steps which I followed:
> >
> > 1:  make ARCH=arm CROSS_COMPILE=arm-cortex_a8-linux-gnueabi- clean
distclean
> > 2: make ARCH=arm CROSS_COMPILE=arm-cortex_a8-linux-gnueabi-
ti814x_evm_config
> > 3: make ARCH=arm CROSS_COMPILE=arm-cortex_a8-linux-gnueabi-
> >
> > Copy the MLO and u-boot.bin to SD card boot partition which is
> > bootable, I see no prints coming from the 1st stage bootlaoder, cant
> > debug it as I don’t have access to JTAG.
> >
> > Any pointers is this code tested ?
>
> First, you need to use u-boot.img not u-boot.bin.  Second, which PG do
> you have on the board?  We only have support for PG1.0 today and not
> PG2.0 as Matt did the initial bring-up and only has a PG1.0 board.  The
> code should be easily ported from the old PSP tree to support PG2.0
> however.
>
> --
> Tom
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>

Tom,

What about DM816x support?  Mainline u-boot have anything for it?  We
finally have Linux 4.2.3 running on our board with .dts support.  Now I'm
starting the task of getting a mainline u-boot to work so we can get rid of
the legacy dtb being part of kernel.

Regards,

Brian