[U-Boot] [PATCH v1 01/12] rockchip: define SUPPORT_SPL and SPL config in RK3288 config

Eddie Cai eddie.cai at rock-chips.com
Fri Oct 23 02:54:41 CEST 2015


Hi Simon

2015-10-23 0:30 GMT+08:00 Simon Glass <sjg at chromium.org>:

> Hi Eddie,
>
> On 22 October 2015 at 10:01, Eddie Cai <eddie.cai at rock-chips.com> wrote:
> > Hi Simon
> >
> > 2015-10-22 22:07 GMT+08:00 Simon Glass <sjg at chromium.org>:
> >>
> >> Hi Lin,
> >>
> >> On 20 October 2015 at 20:37, Lin Huang <hl at rock-chips.com> wrote:
> >> > it may not use SPL in other rockchip SOC, so move SUPPORT_SPL and
> >> > SPL config to rk3288 configuration.
> >> >
> >> > Signed-off-by: Lin Huang <hl at rock-chips.com>
> >> > ---
> >> > Changes in v1: None
> >> >
> >> >  arch/arm/Kconfig               | 2 --
> >> >  arch/arm/mach-rockchip/Kconfig | 2 ++
> >> >  2 files changed, 2 insertions(+), 2 deletions(-)
> >> >
> >> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> >> > index 194fb7b..40fa741 100644
> >> > --- a/arch/arm/Kconfig
> >> > +++ b/arch/arm/Kconfig
> >> > @@ -831,8 +831,6 @@ config TARGET_STM32F429_DISCOVERY
> >> >
> >> >  config ARCH_ROCKCHIP
> >> >         bool "Support Rockchip SoCs"
> >> > -       select SUPPORT_SPL
> >> > -       select SPL
> >> >         select OF_CONTROL
> >> >         select CPU_V7
> >> >         select DM
> >> > diff --git a/arch/arm/mach-rockchip/Kconfig
> >> > b/arch/arm/mach-rockchip/Kconfig
> >> > index ab50f4e..15cd380 100644
> >> > --- a/arch/arm/mach-rockchip/Kconfig
> >> > +++ b/arch/arm/mach-rockchip/Kconfig
> >> > @@ -2,6 +2,8 @@ if ARCH_ROCKCHIP
> >> >
> >> >  config ROCKCHIP_RK3288
> >> >         bool "Support Rockchip RK3288"
> >> > +       select SUPPORT_SPL
> >> > +       select SPL
> >> >         help
> >> >           The Rockchip RK3288 is a ARM-based SoC with a quad-core
> >> > Cortex-A17
> >> >           including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
> >> > --
> >> > 1.9.1
> >> >
> >>
> >> We should avoid little binary blobs for booting the chip. I think we
> >> can live with this as a stepping stone to having a proper SPL, but
> >> what is the plan for a proper SPL in U-Boot?
> >
> > RK3036 have only 8k sram. 4k used by boot rom. The ddr initialize code is
> > almost 4k. So i don't think we can do SPL.
>
> How does U-Boot get loaded in this case? Does it use ROM code? If so
>
Yes, it use boot rom code to load U-Boot

> then I think we should create an SPL that handles the DDR init and
> then returns to the ROM code for loading U-Boot. Also we should
> document how this works in the README.
>
It is a good news you agree we can return to boot rom from SPL. Do you know
what size of sram a smallest SPL need?

>
> Regards,
> Simon
>
>
>


-- 
Eddie


More information about the U-Boot mailing list