[U-Boot] [PATCH] vexpress64: use 2nd DRAM bank only on juno

[Ryan Harkin]

This patch makes the 2nd DRAM bank available on Juno only and not on
other vexpress64 targets, eg. the FVP models.

The commit below added a 2nd bank of NOR flash for Juno, but also for
all vexpress64 targets:

    commit 2d0cee1ca2b9d977fa3214896bb2e30cfec77059
    Author: Liviu Dudau <Liviu.Dudau at foss.arm.com>
    Date:   Mon Oct 19 11:08:31 2015 +0100

    vexpress64: Juno: Declare all 8GB of RAM and make them visible to the kernel.

    Juno comes with 8GB RAM, but U-Boot only passes 2GB to the kernel.
    Declare a secondary memory bank and set the sizes correctly.

    Signed-off-by: Liviu Dudau <Liviu.Dudau at foss.arm.com>
    Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
    Reviewed-by: Ryan Harkin <ryan.harkin at linaro.org>
    Tested-by: Ryan Harkin <ryan.harkin at linaro.org>

Unfortunately, I only fully tested on Juno R0, R1 and the FVP Foundation
model.  Whilst FVP Base AEMV8 models run U-Boot OK, they fail to boot
the kernel.

Signed-off-by: Ryan Harkin <ryan.harkin at linaro.org>
---
 board/armltd/vexpress64/vexpress64.c |  2 ++
 include/configs/vexpress_aemv8a.h    | 13 ++++++++++---
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
index f4e8084..22d7e6c 100644
--- a/board/armltd/vexpress64/vexpress64.c
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -44,8 +44,10 @@ void dram_init_banksize(void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+#ifdef PHYS_SDRAM_2
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
 	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+#endif
 }
 
 /*
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 0f2f1a3..18ab915 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -168,15 +168,22 @@
 #define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x10000000)
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		2
 #define PHYS_SDRAM_1			(V2M_BASE)	/* SDRAM Bank #1 */
-#define PHYS_SDRAM_2			(0x880000000)
 /* Top 16MB reserved for secure world use */
 #define DRAM_SEC_SIZE		0x01000000
 #define PHYS_SDRAM_1_SIZE	0x80000000 - DRAM_SEC_SIZE
-#define PHYS_SDRAM_2_SIZE	0x180000000
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
 
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_NR_DRAM_BANKS		2
+#define PHYS_SDRAM_2			(0x880000000)
+#define PHYS_SDRAM_2_SIZE		0x180000000
+#define CONFIG_NR_DRAM_BANKS_LIST	{ PHYS_SDRAM_1 , PHYS_SDRAM_2}
+#else
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_NR_DRAM_BANKS_LIST	{ PHYS_SDRAM_1 }
+#endif
+
 /* Enable memtest */
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
-- 
2.1.4