[U-Boot] u-boot device model SPI + SPI Flash

[Hoefle Marco]

> -----Original Message-----
> From: Michal Simek [mailto:michal.simek at xilinx.com]
> Sent: Montag, 26. Oktober 2015 14:52
> To: Jagan Teki <jteki at openedev.com>; Hoefle Marco
> <Marco.Hoefle at nanotronic.ch>; Michal Simek <michal.simek at xilinx.com>
> Cc: u-boot at lists.denx.de
> Subject: Re: [U-Boot] u-boot device model SPI + SPI Flash
> 
> On 10/23/2015 12:20 PM, Jagan Teki wrote:
> > On 23 October 2015 at 15:42, Hoefle Marco <Marco.Hoefle at nanotronic.ch>
> wrote:
> >> Maybe somebody has a valid u-boot dts file for a microblaze system with
> an SPI core? That would helpful.
> >> We want to move from a parallel nor flash to a SPI flash for FPGA config,
> u-boot, Linux Kernel and rootfs.
> >> The last missing part is u-boot. The kernel dts file is ok and the mtd
> partitions are set up correctly.
> >
> > I even grepped on linux/arch/microblaze couldn't get much info, So
> > added Michal he well aware of this may be he can help.
> 
> 
> http://www.xilinx.com/support/download/index.html/content/xilinx/en/do
> wnloadNav/embedded-design-tools/2015-2.html
> 
> ac701 bsp and I expect also Kc705.

I downloaded the AC701 bsp file but it is not a valid archive. Do I need to use  (and learn how to use) the 3 GB pertalinux tools to build u-boot for Microblaze?
The u-boot config for the AC701 and the dts file would probably sufficient.

> Thanks,
> Michal
> 
>