[U-Boot] [PATCH v3 4/4] exynos: more debug and cleanup in do_sdhci_init()

Jaehoon Chung jh80.chung at samsung.com
Wed Oct 28 07:33:54 CET 2015


Hi, All.

On 10/05/2015 08:47 PM, Tobias Jakobi wrote:
> Add more debug printfs in do_sdhci_init() for calls
> that can potentially fail.
> 
> Acked-by: Przemyslaw Marczak <p.marczak at samsung.com>
> Signed-off-by: Tobias Jakobi <tjakobi at math.uni-bielefeld.de>
> ---
>  drivers/mmc/s5p_sdhci.c | 20 +++++++++++---------
>  1 file changed, 11 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
> index b203bee..15ecfee 100644
> --- a/drivers/mmc/s5p_sdhci.c
> +++ b/drivers/mmc/s5p_sdhci.c
> @@ -101,29 +101,31 @@ struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS];
>  
>  static int do_sdhci_init(struct sdhci_host *host)
>  {
> -	int dev_id, flag;
> -	int err = 0;
> +	int dev_id, flag, ret;
>  
>  	flag = host->bus_width == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
>  	dev_id = host->index + PERIPH_ID_SDMMC0;
>  
>  	if (dm_gpio_is_valid(&host->pwr_gpio)) {
>  		dm_gpio_set_value(&host->pwr_gpio, 1);
> -		err = exynos_pinmux_config(dev_id, flag);
> -		if (err) {
> +		ret = exynos_pinmux_config(dev_id, flag);
> +		if (ret) {
>  			debug("MMC not configured\n");
> -			return err;
> +			return ret;
>  		}
>  	}
>  
>  	if (dm_gpio_is_valid(&host->cd_gpio)) {
> -		if (dm_gpio_get_value(&host->cd_gpio))
> +		ret = dm_gpio_get_value(&host->cd_gpio);
> +		if (ret) {
> +			debug("no SD card detected (%d)\n", ret);
>  			return -ENODEV;
> +		}

This patch was already applied. But i didn't know why used "ret" at here.
If cd-gpio is active-high, this should be always returned "no SD card detected".
Even if commonly cd-gpio is active-low, we don't know whether cd-gpio is active-low or not.

And dm_gpio_get_value() should be returned error for only one case.

Best Regards,
Jaehoon Chung

>  
> -		err = exynos_pinmux_config(dev_id, flag);
> -		if (err) {
> +		ret = exynos_pinmux_config(dev_id, flag);
> +		if (ret) {
>  			printf("external SD not configured\n");
> -			return err;
> +			return ret;
>  		}
>  	}
>  
> 



More information about the U-Boot mailing list