[U-Boot] [PATCH v1 02/18] i2c: ihs_i2c: Use macro bestpractices

Heiko Schocher hs at denx.de
Wed Oct 28 12:23:40 CET 2015


Hello Dirk,

Am 28.10.2015 um 11:46 schrieb dirk.eibach at gdsys.cc:
> From: Dirk Eibach <dirk.eibach at gdsys.cc>
>
> Reinhard Pfau complained that macros in ihs_i2c do not follow best practices.
>
> Signed-off-by: Dirk Eibach <dirk.eibach at gdsys.cc>
> ---
>
>   drivers/i2c/ihs_i2c.c | 24 ++++++++++++++----------
>   1 file changed, 14 insertions(+), 10 deletions(-)

As the hole patchserie goes not through the i2c tree:

Acked-by: Heiko Schocher <hs at denx.de>

bye,
Heiko

>
> diff --git a/drivers/i2c/ihs_i2c.c b/drivers/i2c/ihs_i2c.c
> index 737beaf..e001459 100644
> --- a/drivers/i2c/ihs_i2c.c
> +++ b/drivers/i2c/ihs_i2c.c
> @@ -13,24 +13,28 @@ DECLARE_GLOBAL_DATA_PTR;
>
>   #ifdef CONFIG_SYS_I2C_IHS_DUAL
>   #define I2C_SET_REG(fld, val) \
> -	{ if (I2C_ADAP_HWNR & 0x10) \
> -		FPGA_SET_REG(I2C_ADAP_HWNR & 0xf, i2c1.fld, val); \
> -	else \
> -		FPGA_SET_REG(I2C_ADAP_HWNR, i2c0.fld, val); }
> +	do { \
> +		if (I2C_ADAP_HWNR & 0x10) \
> +			FPGA_SET_REG(I2C_ADAP_HWNR & 0xf, i2c1.fld, val); \
> +		else \
> +			FPGA_SET_REG(I2C_ADAP_HWNR, i2c0.fld, val); \
> +	} while (0)
>   #else
>   #define I2C_SET_REG(fld, val) \
> -		FPGA_SET_REG(I2C_ADAP_HWNR, i2c0.fld, val);
> +		FPGA_SET_REG(I2C_ADAP_HWNR, i2c0.fld, val)
>   #endif
>
>   #ifdef CONFIG_SYS_I2C_IHS_DUAL
>   #define I2C_GET_REG(fld, val) \
> -	{ if (I2C_ADAP_HWNR & 0x10) \
> -		FPGA_GET_REG(I2C_ADAP_HWNR & 0xf, i2c1.fld, val); \
> -	else \
> -		FPGA_GET_REG(I2C_ADAP_HWNR, i2c0.fld, val); }
> +	do {					\
> +		if (I2C_ADAP_HWNR & 0x10) \
> +			FPGA_GET_REG(I2C_ADAP_HWNR & 0xf, i2c1.fld, val); \
> +		else \
> +			FPGA_GET_REG(I2C_ADAP_HWNR, i2c0.fld, val); \
> +	} while (0)
>   #else
>   #define I2C_GET_REG(fld, val) \
> -		FPGA_GET_REG(I2C_ADAP_HWNR, i2c0.fld, val);
> +		FPGA_GET_REG(I2C_ADAP_HWNR, i2c0.fld, val)
>   #endif
>
>   enum {
>

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the U-Boot mailing list