[U-Boot] [PATCH 2/2] s5p sdhci: call pinmux for card's gpio pins before use them
Jaehoon Chung
jh80.chung at samsung.com
Thu Oct 29 08:29:53 CET 2015
Hi,
Looks good to me.
Acked-by: Jaehoon Chung <jh80.chung at samsung.com>
Best Regards,
Jaehoon Chung
On 10/28/2015 11:41 PM, Przemyslaw Marczak wrote:
> The SD card detection depends on checking one pin state.
> But the pin was configured after card was detected, which is wrong.
>
> This commit fixes this, by moving call to pinmux before use the pin.
>
> Tested-on: Odroid U3 and Odroid X2.
>
> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
> Cc: Guillaume GARDET <guillaume.gardet at free.fr>
> Cc: Lukasz Majewski <l.majewski at samsung.com>
> Cc: Jaehoon Chung <jh80.chung at samsung.com>
> Cc: Minkyu Kang <mk7.kang at samsung.com>
> Cc: Simon Glass <sjg at chromium.org>
> ---
> drivers/mmc/s5p_sdhci.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
> index 15ecfee..44353c7 100644
> --- a/drivers/mmc/s5p_sdhci.c
> +++ b/drivers/mmc/s5p_sdhci.c
> @@ -106,6 +106,12 @@ static int do_sdhci_init(struct sdhci_host *host)
> flag = host->bus_width == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
> dev_id = host->index + PERIPH_ID_SDMMC0;
>
> + ret = exynos_pinmux_config(dev_id, flag);
> + if (ret) {
> + printf("external SD not configured\n");
> + return ret;
> + }
> +
> if (dm_gpio_is_valid(&host->pwr_gpio)) {
> dm_gpio_set_value(&host->pwr_gpio, 1);
> ret = exynos_pinmux_config(dev_id, flag);
> @@ -121,12 +127,6 @@ static int do_sdhci_init(struct sdhci_host *host)
> debug("no SD card detected (%d)\n", ret);
> return -ENODEV;
> }
> -
> - ret = exynos_pinmux_config(dev_id, flag);
> - if (ret) {
> - printf("external SD not configured\n");
> - return ret;
> - }
> }
>
> return s5p_sdhci_core_init(host);
> @@ -193,7 +193,7 @@ static int process_nodes(const void *blob, int node_list[], int count)
> }
>
> ret = do_sdhci_init(host);
> - if (ret) {
> + if (ret && ret != -ENODEV) {
> printf("%s: failed to initialize dev %d (%d)\n", __func__, i, ret);
> failed++;
> }
>
More information about the U-Boot
mailing list