[U-Boot] [PATCH v1 0/2] arm, imx6, aristainetos2: set gpr register after reset

[Stefano Babic]

On 29/10/2015 11:40, Heiko Schocher wrote:
> Hello Stefano,
> 
> Am 25.09.2015 um 12:31 schrieb Heiko Schocher:
>> setting the gpr 1,8 and 12 registers to a fix value.
>> This is needed because after a WDT reset, this registers
>> are not correct resettet, and prevent linux from booting
>> again.
>>
>> with this patches no compileerrors found:
>> $ ./tools/buildman/buildman -b 20150925 mx6
>> boards.cfg is up to date. Nothing to do.
>> Building 4 commits for 49 boards (8 threads, 1 job per thread)
>> Cloning repo for thread 2
>> Cloning repo for thread 3
>> Cloning repo for thread 4
>> Cloning repo for thread 5
>> Cloning repo for thread 6
>> Cloning repo for thread 7
>>    196    0    0 /196    mx6qsabreauto
>> $
>>
>>
>> Heiko Schocher (2):
>>    arm, imx: add some gpr register defines
>>    arm, imx6, aristainetos2: set gpr register after reset
>>
>>   arch/arm/include/asm/arch-mx6/imx-regs.h | 35
>> ++++++++++++++++++++++++++++++++
>>   board/aristainetos/aristainetos-v2.c     | 16 +++++++++++++++
>>   2 files changed, 51 insertions(+)
> 
> Do you have some comments to this patchset, or can it go into mainline?
> 

No comment on my side - I will pick'em for inclusion.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================