[U-Boot] [PATCH V3 12/14] exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4.

Anand Moon linux.amoon at gmail.com
Fri Oct 30 04:06:51 CET 2015


hi,

On 27 October 2015 at 17:38, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
> This commit adds additional file with implementation of board
> detection code for Odroid-XU3/XU4.
>
> The detection depends on compatible found in fdt:
> - "samsung,exynos5" - uses Exynos5 generic code
> - "samsung,odroidxu3" - try detect XU3 revision
>
> There are few revisions of Odroid XU3/XU4, each can be detected
> by checking the value of channel 9 of built-in ADC:
>  Rev   ADC  Board
>  0.1     0  XU3 0.1
>  0.2   372  XU3 0.2 | XU3L - no DISPLAYPORT
>  0.3  1280  XU4 0.1
>
> The detection code depends on the ADC+10% value.
>
> Implementation of functions:
> - set_board_type()     - read ADC and set type
> - get_board_rev()      - returns board revision: 1..3
> - get_board_type()     - returns board type string
>
> Additional functions with return values of bool:
> - board_is_generic()   - true if found compatible "samsung,exynos5"
>                          but not "samsung,odroidxu3"
> - board_is_odroidxu3() - true if found compatible "samsung,odroidxu3"
>                          and one of XU3 revision.
> - board_is_odroidxu4() - true if found compatible "samsung,odroidxu3"
>                          and XU4 revision.
>
> After I2C controller init, the get_board_type() can check
> if the XU3 board is a "Lite" variant, by probing chip
> 0x40 on I2C0 (INA231 - exists only on non-lite).
> This is useful for setting fdt file name at misc_init_r().
>
> Enabled configs:
> - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> - CONFIG_ODROID_REV_AIN
> - CONFIG_REVISION_TAG
> - CONFIG_BOARD_TYPES
>
> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
> Cc: Minkyu Kang <mk7.kang at samsung.com>
> Cc: Simon Glass <sjg at chromium.org>
> ---
> Changes V2:
> - move detection code from exynos5-dt.c to exynos5-dt-types.c
> - add header with board type function declarations
> - check for compatible before do the detection
> - update the ADC max values with 20% tolerance
> - fix XU4 adc value, related to mistake from table in XU4 schematic
> - return "Not supported" for XU4 when calls one of:
>   --dfu_get_alt_boot()
>   --dfu_get_alt_system()
> - extend ${dfu_alt_system} by strings:
>   -- 'exynos5422-odroidxu3-lite.dtb'
>   -- 'exynos5422-odroidxu4.dtb' - allows prepare card on XU3
>
> Changes V3:
> - fix merge conflict in: configs/odroid-xu3_defconfig
> ---
>  board/samsung/common/Makefile           |   5 +-
>  board/samsung/common/exynos5-dt-types.c | 196 ++++++++++++++++++++++++++++++++
>  board/samsung/common/exynos5-dt.c       |  12 ++
>  configs/odroid-xu3_defconfig            |   2 +
>  include/configs/odroid_xu3.h            |  12 ++
>  include/samsung/exynos5-dt-types.h      |  27 +++++
>  6 files changed, 253 insertions(+), 1 deletion(-)
>  create mode 100644 board/samsung/common/exynos5-dt-types.c
>  create mode 100644 include/samsung/exynos5-dt-types.h
>
> diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile
> index 6cbd906..ef1a8f3 100644
> --- a/board/samsung/common/Makefile
> +++ b/board/samsung/common/Makefile
> @@ -11,5 +11,8 @@ obj-$(CONFIG_MISC_COMMON) += misc.o
>
>  ifndef CONFIG_SPL_BUILD
>  obj-$(CONFIG_BOARD_COMMON)     += board.o
> -obj-$(CONFIG_EXYNOS5_DT)       += exynos5-dt.o
> +ifdef CONFIG_EXYNOS5_DT
> +obj-y += exynos5-dt.o
> +obj-$(CONFIG_BOARD_TYPES) += exynos5-dt-types.o
> +endif
>  endif
> diff --git a/board/samsung/common/exynos5-dt-types.c b/board/samsung/common/exynos5-dt-types.c
> new file mode 100644
> index 0000000..48fd1f7
> --- /dev/null
> +++ b/board/samsung/common/exynos5-dt-types.c
> @@ -0,0 +1,196 @@
> +/*
> + * Copyright (C) 2015 Samsung Electronics
> + * Przemyslaw Marczak <p.marczak at samsung.com>
> + *
> + * SPDX-License-Identifier:    GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <adc.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <fdtdec.h>
> +#include <power/pmic.h>
> +#include <power/regulator.h>
> +#include <power/s2mps11.h>
> +#include <samsung/exynos5-dt-types.h>
> +#include <samsung/misc.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static const struct udevice_id board_ids[] = {
> +       { .compatible = "samsung,odroidxu3", .data = EXYNOS5_BOARD_ODROID_XU3 },
> +       { .compatible = "samsung,exynos5", .data = EXYNOS5_BOARD_GENERIC },
> +       { },
> +};
> +
> +/**
> + * Odroix XU3/4 board revisions:
> + * Rev   ADCmax  Board
> + * 0.1     0     XU3 0.1
> + * 0.2   410     XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231)
> + * 0.3  1408     XU4 0.1
> + * Use +10 % for ADC value tolerance.
> + */
> +struct odroid_rev_info odroid_info[] = {
> +       { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" },
> +       { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 410, "xu3" },
> +       { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1408, "xu4" },
> +       { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" },
> +};
> +
> +static unsigned int odroid_get_rev(void)
> +{
> +       int i;
> +
> +       for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
> +               if (odroid_info[i].board_type == gd->board_type)
> +                       return odroid_info[i].board_rev;
> +       }
> +
> +       return 0;
> +}
> +
> +static int odroid_get_board_type(void)
> +{
> +       unsigned int adcval;
> +       int ret, i;
> +
> +       ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN, &adcval);
> +       if (ret)
> +               goto rev_default;
> +
> +       for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
> +               /* ADC tolerance: +20 % */
> +               if (adcval < odroid_info[i].adc_val)
> +                       return odroid_info[i].board_type;
> +       }
> +
> +rev_default:
> +       return EXYNOS5_BOARD_ODROID_XU3;
> +}
> +
> +/**
> + * odroid_get_type_str - returns pointer to one of the board type string.
> + * Board types: "xu3", "xu3-lite", "xu4". However the "xu3lite" can be
> + * detected only when the i2c controller is ready to use. Fortunately,
> + * XU3 and XU3L are compatible, and the information about board lite
> + * revision is needed before booting the linux, to set proper environment
> + * variable: $fdtfile.
> + */
> +static const char *odroid_get_type_str(void)
> +{
> +       const char *type_xu3l = "xu3-lite";
> +       struct udevice *dev, *chip;
> +       int i, ret;
> +
> +       if (gd->board_type != EXYNOS5_BOARD_ODROID_XU3_REV02)
> +               goto exit;
> +
> +       ret = pmic_get("s2mps11", &dev);
> +       if (ret)
> +               goto exit;
> +
> +       /* Enable LDO26: 3.0V */
> +       ret = pmic_reg_write(dev, S2MPS11_REG_L26CTRL,
> +                            S2MPS11_LDO26_ENABLE);
> +       if (ret)
> +               goto exit;
> +
> +       /* Check XU3Lite by probe INA231 I2C0:0x40 */
> +       ret = uclass_get_device(UCLASS_I2C, 0, &dev);
> +       if (ret)
> +               goto exit;
> +
> +       ret = dm_i2c_probe(dev, 0x40, 0x0, &chip);
> +       if (ret)
> +               return type_xu3l;
> +
> +exit:
> +       for (i = 0; i < ARRAY_SIZE(odroid_info); i++) {
> +               if (odroid_info[i].board_type == gd->board_type)
> +                       return odroid_info[i].name;
> +       }
> +
> +       return NULL;
> +}
> +
> +bool board_is_odroidxu3(void)
> +{
> +       if (gd->board_type >= EXYNOS5_BOARD_ODROID_XU3 &&
> +           gd->board_type <= EXYNOS5_BOARD_ODROID_XU3_REV02)
> +               return true;
> +
> +       return false;
> +}
> +
> +bool board_is_odroidxu4(void)
> +{
> +       if (gd->board_type == EXYNOS5_BOARD_ODROID_XU4_REV01)
> +               return true;
> +
> +       return false;
> +}
> +
> +bool board_is_generic(void)
> +{
> +       if (gd->board_type == EXYNOS5_BOARD_GENERIC)
> +               return true;
> +
> +       return false;
> +}
> +
> +/**
> + * get_board_rev() - return detected board revision.
> + *
> + * @return:  return board revision number for XU3 or 0 for generic
> + */
> +u32 get_board_rev(void)
> +{
> +       if (board_is_generic())
> +               return 0;
> +
> +       return odroid_get_rev();
> +}
> +
> +/**
> + * get_board_type() - returns board type string.
> + *
> + * @return:  return board type string for XU3 or empty string for generic
> + */
> +const char *get_board_type(void)
> +{
> +       const char *generic = "";
> +
> +       if (board_is_generic())
> +               return generic;
> +
> +       return odroid_get_type_str();
> +}
> +
> +/**
> + * set_board_type() - set board type in gd->board_type.
> + * As default type set EXYNOS5_BOARD_GENERIC, if detect Odroid,
> + * then set its proper type.
> + */
> +void set_board_type(void)
> +{
> +       const struct udevice_id *of_match = board_ids;
> +       int ret;
> +
> +       gd->board_type = EXYNOS5_BOARD_GENERIC;
> +
> +       while (of_match->compatible) {
> +               ret = fdt_node_check_compatible(gd->fdt_blob, 0,
> +                                               of_match->compatible);
> +               if (ret)
> +                       of_match++;
> +
> +               gd->board_type = of_match->data;
> +               break;
> +       }
> +
> +       /* If Odroid, then check its revision */
> +       if (board_is_odroidxu3())
> +               gd->board_type = odroid_get_board_type();
> +}
> diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c
> index 4250f72..4d9e151 100644
> --- a/board/samsung/common/exynos5-dt.c
> +++ b/board/samsung/common/exynos5-dt.c
> @@ -27,7 +27,10 @@
>  #include <power/pmic.h>
>  #include <power/max77686_pmic.h>
>  #include <power/regulator.h>
> +#include <power/s2mps11.h>
>  #include <power/s5m8767.h>
> +#include <samsung/exynos5-dt-types.h>
> +#include <samsung/misc.h>
>  #include <tmu.h>
>
>  DECLARE_GLOBAL_DATA_PTR;
> @@ -335,15 +338,24 @@ int board_usb_init(int index, enum usb_init_type init)
>  #ifdef CONFIG_SET_DFU_ALT_INFO
>  char *get_dfu_alt_system(char *interface, char *devstr)
>  {
> +       char *info = "Not supported!";
> +
> +       if (board_is_odroidxu4())
> +               return info;
> +
>         return getenv("dfu_alt_system");
>  }
>
>  char *get_dfu_alt_boot(char *interface, char *devstr)
>  {
> +       char *info = "Not supported!";
>         struct mmc *mmc;
>         char *alt_boot;
>         int dev_num;
>
> +       if (board_is_odroidxu4())
> +               return info;
> +
>         dev_num = simple_strtoul(devstr, NULL, 10);
>
>         mmc = find_mmc_device(dev_num);
> diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig
> index 780dcab..4ab91fa 100644
> --- a/configs/odroid-xu3_defconfig
> +++ b/configs/odroid-xu3_defconfig
> @@ -16,3 +16,5 @@ CONFIG_PMIC_S2MPS11=y
>  CONFIG_USB=y
>  CONFIG_DM_USB=y
>  CONFIG_VIDEO_BRIDGE=y
> +CONFIG_ADC=y
> +CONFIG_ADC_EXYNOS=y
> diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
> index 3c70158..648e48b 100644
> --- a/include/configs/odroid_xu3.h
> +++ b/include/configs/odroid_xu3.h
> @@ -94,6 +94,8 @@
>         "boot.scr fat 0 1;"                 \
>         "boot.cmd fat 0 1;"                 \
>         "exynos5422-odroidxu3.dtb fat 0 1;" \
> +       "exynos5422-odroidxu3-lite.dtb fat 0 1;" \
> +       "exynos5422-odroidxu4.dtb fat 0 1;" \
>         "boot part 0 1;"                    \
>         "root part 0 2\0"
>
> @@ -113,9 +115,19 @@
>
>  /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
>  #define CONFIG_MISC_COMMON
> +#define CONFIG_MISC_INIT_R
>  #define CONFIG_SET_DFU_ALT_INFO
>  #define CONFIG_SET_DFU_ALT_BUF_LEN     (SZ_1K)
>
> +/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
> +#define CONFIG_ODROID_REV_AIN                  9
> +#define CONFIG_REVISION_TAG
> +#define CONFIG_BOARD_TYPES
> +
> +#undef CONFIG_SYS_BOARD
> +#define CONFIG_SYS_BOARD       "odroid"
> +
>  /* Define new extra env settings, including DFU settings */
>  #undef CONFIG_EXTRA_ENV_SETTINGS
>  #define CONFIG_EXTRA_ENV_SETTINGS \
> diff --git a/include/samsung/exynos5-dt-types.h b/include/samsung/exynos5-dt-types.h
> new file mode 100644
> index 0000000..479e2e7
> --- /dev/null
> +++ b/include/samsung/exynos5-dt-types.h
> @@ -0,0 +1,27 @@
> +#ifndef _EXYNOS5_DT_H_
> +#define _EXYNOS5_DT_H_
> +
> +enum {
> +       EXYNOS5_BOARD_GENERIC,
> +
> +       EXYNOS5_BOARD_ODROID_XU3,
> +       EXYNOS5_BOARD_ODROID_XU3_REV01,
> +       EXYNOS5_BOARD_ODROID_XU3_REV02,
> +       EXYNOS5_BOARD_ODROID_XU4_REV01,
> +       EXYNOS5_BOARD_ODROID_UNKNOWN,
> +
> +       EXYNOS5_BOARD_COUNT,
> +};
> +
> +struct odroid_rev_info {
> +       int board_type;
> +       int board_rev;
> +       int adc_val;
> +       const char *name;
> +};
> +
> +bool board_is_generic(void);
> +bool board_is_odroidxu3(void);
> +bool board_is_odroidxu4(void);
> +
> +#endif
> --
> 1.9.1
>

Tested-by: Anand Moon <linux.amoon at gmail.com>

-Anand Moon


More information about the U-Boot mailing list