[U-Boot] [PATCH 1/8] serial: altera_jtag_uart: use BIT macro

[Jagan Teki]

On 30 October 2015 at 12:48, Thomas Chou <thomas at wytron.com.tw> wrote:
> Replace numerical bit shift with BIT macro
> in altera_jtag_uart
>
> :%s/(1 << nr)/BIT(nr)/g
> where nr = 0, 1, 2 .... 31
>
> Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
> ---

Reviewed-by: Jagan Teki <jteki at openedev.com>

>  drivers/serial/altera_jtag_uart.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/serial/altera_jtag_uart.c b/drivers/serial/altera_jtag_uart.c
> index 39d4a4e..0aa741c 100644
> --- a/drivers/serial/altera_jtag_uart.c
> +++ b/drivers/serial/altera_jtag_uart.c
> @@ -22,11 +22,11 @@ struct altera_jtaguart_platdata {
>  };
>
>  /* data register */
> -#define ALTERA_JTAG_RVALID     (1<<15)         /* Read valid */
> +#define ALTERA_JTAG_RVALID     BIT(15) /* Read valid */
>
>  /* control register */
> -#define ALTERA_JTAG_AC         (1 << 10)       /* activity indicator */
> -#define ALTERA_JTAG_RRDY       (1 << 12)       /* read available */
> +#define ALTERA_JTAG_AC         BIT(10) /* activity indicator */
> +#define ALTERA_JTAG_RRDY       BIT(12) /* read available */
>  #define ALTERA_JTAG_WSPACE(d)  ((d)>>16)       /* Write space avail */
>  /* Write fifo size. FIXME: this should be extracted with sopc2dts */
>  #define ALTERA_JTAG_WRITE_DEPTH        64
> --
> 2.5.0

thanks!
-- 
Jagan | openedev.