[U-Boot] [PATCH 2/2] ARM: zynqmp: Add DTS for ep108 board
Michal Simek
michal.simek at xilinx.com
Fri Oct 30 15:52:59 CET 2015
Add DTS for ep108 board.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
arch/arm/dts/Makefile | 2 +
arch/arm/dts/zynqmp-ep108-clk.dtsi | 119 +++++++
arch/arm/dts/zynqmp-ep108.dts | 174 ++++++++++
arch/arm/dts/zynqmp.dtsi | 668 +++++++++++++++++++++++++++++++++++++
4 files changed, 963 insertions(+)
create mode 100644 arch/arm/dts/zynqmp-ep108-clk.dtsi
create mode 100644 arch/arm/dts/zynqmp-ep108.dts
create mode 100644 arch/arm/dts/zynqmp.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ddc6a057d567..910648ca2dba 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -65,6 +65,8 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
zynq-zc770-xm011.dtb \
zynq-zc770-xm012.dtb \
zynq-zc770-xm013.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += \
+ zynqmp-ep108.dtb
dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb
dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb
diff --git a/arch/arm/dts/zynqmp-ep108-clk.dtsi b/arch/arm/dts/zynqmp-ep108-clk.dtsi
new file mode 100644
index 000000000000..f86452655391
--- /dev/null
+++ b/arch/arm/dts/zynqmp-ep108-clk.dtsi
@@ -0,0 +1,119 @@
+/*
+ * clock specification for Xilinx ZynqMP ep108 development board
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek at xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+&amba {
+ misc_clk: misc_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ i2c_clk: i2c_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0x0>;
+ clock-frequency = <111111111>;
+ };
+
+ sata_clk: sata_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <75000000>;
+ };
+
+ dp_aclk: clock0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-accuracy = <100>;
+ };
+
+ dp_aud_clk: clock1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <22579200>;
+ clock-accuracy = <100>;
+ };
+};
+
+&can0 {
+ clocks = <&misc_clk &misc_clk>;
+};
+
+&gem0 {
+ clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
+};
+
+&gpio {
+ clocks = <&misc_clk>;
+};
+
+&i2c0 {
+ clocks = <&i2c_clk>;
+};
+
+&i2c1 {
+ clocks = <&i2c_clk>;
+};
+
+&qspi {
+ clocks = <&misc_clk &misc_clk>;
+};
+
+&sata {
+ clocks = <&sata_clk>;
+};
+
+&sdhci0 {
+ clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&sdhci1 {
+ clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&spi0 {
+ clocks = <&misc_clk &misc_clk>;
+};
+
+&spi1 {
+ clocks = <&misc_clk &misc_clk>;
+};
+
+&uart0 {
+ clocks = <&misc_clk &misc_clk>;
+};
+
+&usb0 {
+ clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&usb1 {
+ clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&watchdog0 {
+ clocks= <&misc_clk>;
+};
+
+&xilinx_drm {
+ clocks = <&misc_clk>;
+};
+
+&xlnx_dp {
+ clocks = <&dp_aclk>, <&dp_aud_clk>;
+};
+
+&xlnx_dp_snd_codec0 {
+ clocks = <&dp_aud_clk>;
+};
+
+&xlnx_dpdma {
+ clocks = <&misc_clk>;
+};
diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts
new file mode 100644
index 000000000000..4481bd07c9e8
--- /dev/null
+++ b/arch/arm/dts/zynqmp-ep108.dts
@@ -0,0 +1,174 @@
+/*
+ * dts file for Xilinx ZynqMP ep108 development board
+ *
+ * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek at xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+/include/ "zynqmp.dtsi"
+/include/ "zynqmp-ep108-clk.dtsi"
+
+/ {
+ model = "ZynqMP EP108";
+
+ aliases {
+ serial0 = &uart0;
+ spi0 = &qspi;
+ spi1 = &spi0;
+ spi2 = &spi1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x40000000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&gem0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy at 0{
+ reg = <0>;
+ max-speed = <100>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+ eeprom at 54 {
+ compatible = "at,24c64";
+ reg = <0x54>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ eeprom at 55 {
+ compatible = "at,24c64";
+ reg = <0x55>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash at 0 {
+ compatible = "n25q512a11";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <10000000>;
+ partition at qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition at qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition at qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition at qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+ ceva,broken-gen2;
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&sdhci1 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <1>;
+ spi0_flash0: spi0_flash0 at 0 {
+ compatible = "m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ spi0_flash0 at 00000000 {
+ label = "spi0_flash0";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ num-cs = <1>;
+ spi1_flash0: spi1_flash0 at 0 {
+ compatible = "m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ spi1_flash0 at 00000000 {
+ label = "spi1_flash0";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+ maximum-speed = "high-speed";
+};
+
+&watchdog0 {
+ status = "okay";
+};
+
+&xlnx_dp {
+ xlnx,max-pclock-frequency = <200000>;
+};
+
+&xlnx_dpdma {
+ xlnx,axi-clock-freq = <200000000>;
+};
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
new file mode 100644
index 000000000000..24a34e6d85d2
--- /dev/null
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -0,0 +1,668 @@
+/*
+ * dts file for Xilinx ZynqMP
+ *
+ * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek at xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/ {
+ compatible = "xlnx,zynqmp";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x0>;
+ };
+
+ cpu at 1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x1>;
+ };
+
+ cpu at 2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x2>;
+ };
+
+ cpu at 3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x3>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 143 4>,
+ <0 144 4>,
+ <0 145 4>,
+ <0 146 4>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ firmware {
+ compatible = "xlnx,zynqmp-pm";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <1 13 0xf01>,
+ <1 14 0xf01>,
+ <1 11 0xf01>,
+ <1 10 0xf01>;
+ };
+
+ amba_apu: amba_apu {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ gic: interrupt-controller at f9010000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ reg = <0x0 0xf9010000 0x10000>,
+ <0x0 0xf902f000 0x2000>,
+ <0x0 0xf9040000 0x20000>,
+ <0x0 0xf906f000 0x2000>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <1 9 0xf04>;
+ };
+ };
+
+ amba: amba {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ can0: can at ff060000 {
+ compatible = "xlnx,zynq-can-1.0";
+ status = "disabled";
+ clock-names = "can_clk", "pclk";
+ reg = <0x0 0xff060000 0x1000>;
+ interrupts = <0 23 4>;
+ interrupt-parent = <&gic>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
+ };
+
+ can1: can at ff070000 {
+ compatible = "xlnx,zynq-can-1.0";
+ status = "disabled";
+ clock-names = "can_clk", "pclk";
+ reg = <0x0 0xff070000 0x1000>;
+ interrupts = <0 24 4>;
+ interrupt-parent = <&gic>;
+ tx-fifo-depth = <0x40>;
+ rx-fifo-depth = <0x40>;
+ };
+
+ /* GDMA */
+ fpd_dma_chan1: dma at fd500000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd500000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 124 4>;
+ xlnx,id = <0>;
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan2: dma at fd510000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd510000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 125 4>;
+ xlnx,id = <1>;
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan3: dma at fd520000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd520000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 126 4>;
+ xlnx,id = <2>;
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan4: dma at fd530000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd530000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 127 4>;
+ xlnx,id = <3>;
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan5: dma at fd540000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd540000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 128 4>;
+ xlnx,id = <4>;
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan6: dma at fd550000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd550000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 129 4>;
+ xlnx,id = <5>;
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan7: dma at fd560000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd560000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 130 4>;
+ xlnx,id = <6>;
+ xlnx,bus-width = <128>;
+ };
+
+ fpd_dma_chan8: dma at fd570000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xfd570000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 131 4>;
+ xlnx,id = <7>;
+ xlnx,bus-width = <128>;
+ };
+
+ gpu: gpu at fd4b0000 {
+ status = "disabled";
+ compatible = "arm,mali-400", "arm,mali-utgard";
+ reg = <0x0 0xfd4b0000 0x30000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>;
+ interrupt-names = "IRQGP", "IRQGPMMU", "IRQPP0", "IRQPPMMU0", "IRQPP1", "IRQPPMMU1";
+ };
+
+ /* ADMA */
+ lpd_dma_chan1: dma at ffa80000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffa80000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 77 4>;
+ xlnx,id = <0>;
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan2: dma at ffa90000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffa90000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 78 4>;
+ xlnx,id = <1>;
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan3: dma at ffaa0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffaa0000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 79 4>;
+ xlnx,id = <2>;
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan4: dma at ffab0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffab0000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 80 4>;
+ xlnx,id = <3>;
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan5: dma at ffac0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffac0000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 81 4>;
+ xlnx,id = <4>;
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan6: dma at ffad0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffad0000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 82 4>;
+ xlnx,id = <5>;
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan7: dma at ffae0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffae0000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 83 4>;
+ xlnx,id = <6>;
+ xlnx,bus-width = <64>;
+ };
+
+ lpd_dma_chan8: dma at ffaf0000 {
+ status = "disabled";
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xffaf0000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 84 4>;
+ xlnx,id = <7>;
+ xlnx,bus-width = <64>;
+ };
+
+ nand0: nand at ff100000 {
+ compatible = "arasan,nfc-v3p10";
+ status = "disabled";
+ reg = <0x0 0xff100000 0x1000>;
+ clock-names = "clk_sys", "clk_flash";
+ interrupt-parent = <&gic>;
+ interrupts = <0 14 4>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ };
+
+ gem0: ethernet at ff0b0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 57 4>, <0 57 4>;
+ reg = <0x0 0xff0b0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ jumbo-max-len = <10240>;
+ jumbo-supported;
+ };
+
+ gem1: ethernet at ff0c0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 59 4>, <0 59 4>;
+ reg = <0x0 0xff0c0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ jumbo-max-len = <10240>;
+ jumbo-supported;
+ };
+
+ gem2: ethernet at ff0d0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 61 4>, <0 61 4>;
+ reg = <0x0 0xff0d0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ jumbo-max-len = <10240>;
+ jumbo-supported;
+ };
+
+ gem3: ethernet at ff0e0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 63 4>, <0 63 4>;
+ reg = <0x0 0xff0e0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ jumbo-max-len = <10240>;
+ jumbo-supported;
+ };
+
+ gpio: gpio at ff0a0000 {
+ compatible = "xlnx,zynqmp-gpio-1.0";
+ status = "disabled";
+ #gpio-cells = <0x2>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 16 4>;
+ reg = <0x0 0xff0a0000 0x1000>;
+ };
+
+ i2c0: i2c at ff020000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 17 4>;
+ reg = <0x0 0xff020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c at ff030000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 18 4>;
+ reg = <0x0 0xff030000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pcie: pcie at fd0e0000 {
+ compatible = "xlnx,nwl-pcie-2.11";
+ status = "disabled";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ interrupt-parent = <&gic>;
+ interrupts = < 0 118 4>,
+ < 0 116 4>,
+ < 0 115 4>, /* MSI_1 [63...32] */
+ < 0 114 4 >; /* MSI_0 [31...0] */
+ interrupt-names = "misc", "intx", "msi_1", "msi_0";
+ reg = <0x0 0xfd0e0000 0x1000>,
+ <0x0 0xfd480000 0x1000>,
+ <0x0 0xe0000000 0x1000000>;
+ reg-names = "breg", "pcireg", "cfg";
+ ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
+ };
+
+ qspi: spi at ff0f0000 {
+ compatible = "xlnx,zynqmp-qspi-1.0";
+ status = "disabled";
+ clock-names = "ref_clk", "pclk";
+ interrupts = <0 15 4>;
+ interrupt-parent = <&gic>;
+ num-cs = <1>;
+ reg = <0x0 0xff0f0000 0x1000 0x0 0xc0000000 0x8000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ rtc: rtc at ffa60000 {
+ compatible = "xlnx,zynqmp-rtc";
+ status = "disabled";
+ reg = <0x0 0xffa60000 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 26 4>, <0 27 4>;
+ interrupt-names = "alarm", "sec";
+ };
+
+ sata: ahci at fd0c0000 {
+ compatible = "ceva,ahci-1v84";
+ status = "disabled";
+ reg = <0x0 0xfd0c0000 0x2000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 133 4>;
+ };
+
+ sdhci0: sdhci at ff160000 {
+ compatible = "arasan,sdhci-8.9a";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 48 4>;
+ reg = <0x0 0xff160000 0x1000>;
+ clock-names = "clk_xin", "clk_ahb";
+ };
+
+ sdhci1: sdhci at ff170000 {
+ compatible = "arasan,sdhci-8.9a";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 49 4>;
+ reg = <0x0 0xff170000 0x1000>;
+ clock-names = "clk_xin", "clk_ahb";
+ };
+
+ smmu: smmu at fd800000 {
+ compatible = "arm,mmu-500";
+ reg = <0x0 0xfd800000 0x20000>;
+ #global-interrupts = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
+ <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>;
+ };
+
+ spi0: spi at ff040000 {
+ compatible = "cdns,spi-r1p6";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 19 4>;
+ reg = <0x0 0xff040000 0x1000>;
+ clock-names = "ref_clk", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi at ff050000 {
+ compatible = "cdns,spi-r1p6";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 20 4>;
+ reg = <0x0 0xff050000 0x1000>;
+ clock-names = "ref_clk", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ttc0: timer at ff110000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
+ reg = <0x0 0xff110000 0x1000>;
+ timer-width = <32>;
+ };
+
+ ttc1: timer at ff120000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
+ reg = <0x0 0xff120000 0x1000>;
+ timer-width = <32>;
+ };
+
+ ttc2: timer at ff130000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
+ reg = <0x0 0xff130000 0x1000>;
+ timer-width = <32>;
+ };
+
+ ttc3: timer at ff140000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
+ reg = <0x0 0xff140000 0x1000>;
+ timer-width = <32>;
+ };
+
+ uart0: serial at ff000000 {
+ compatible = "cdns,uart-r1p8";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 21 4>;
+ reg = <0x0 0xff000000 0x1000>;
+ clock-names = "uart_clk", "pclk";
+ };
+
+ uart1: serial at ff010000 {
+ compatible = "cdns,uart-r1p8";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 22 4>;
+ reg = <0x0 0xff010000 0x1000>;
+ clock-names = "uart_clk", "pclk";
+ };
+
+ usb0: usb at fe200000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 65 4>;
+ reg = <0x0 0xfe200000 0x40000>;
+ clock-names = "clk_xin", "clk_ahb";
+ };
+
+ usb1: usb at fe300000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 70 4>;
+ reg = <0x0 0xfe300000 0x40000>;
+ clock-names = "clk_xin", "clk_ahb";
+ };
+
+ watchdog0: watchdog at fd4d0000 {
+ compatible = "cdns,wdt-r1p2";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 52 1>;
+ reg = <0x0 0xfd4d0000 0x1000>;
+ timeout-sec = <10>;
+ };
+
+ xilinx_drm: xilinx_drm {
+ compatible = "xlnx,drm";
+ status = "disabled";
+ xlnx,encoder-slave = <&xlnx_dp>;
+ xlnx,connector-type = "DisplayPort";
+ xlnx,dp-sub = <&xlnx_dp_sub>;
+ planes {
+ xlnx,pixel-format = "rgb565";
+ plane0 {
+ dmas = <&xlnx_dpdma 3>;
+ dma-names = "dma";
+ };
+ plane1 {
+ dmas = <&xlnx_dpdma 0>;
+ dma-names = "dma";
+ };
+ };
+ };
+
+ xlnx_dp: dp at 43c00000 {
+ compatible = "xlnx,v-dp";
+ status = "disabled";
+ reg = <0x0 0xfd4a0000 0x1000>;
+ interrupts = <0 119 4>;
+ interrupt-parent = <&gic>;
+ clock-names = "aclk", "aud_clk";
+ xlnx,dp-version = "v1.2";
+ xlnx,max-lanes = <2>;
+ xlnx,max-link-rate = <540000>;
+ xlnx,max-bpc = <16>;
+ xlnx,enable-ycrcb;
+ xlnx,colormetry = "rgb";
+ xlnx,bpc = <8>;
+ xlnx,audio-chan = <2>;
+ xlnx,dp-sub = <&xlnx_dp_sub>;
+ };
+
+ xlnx_dp_snd_card: dp_snd_card {
+ compatible = "xlnx,dp-snd-card";
+ status = "disabled";
+ xlnx,dp-snd-pcm = <&xlnx_dp_snd_pcm0>, <&xlnx_dp_snd_pcm1>;
+ xlnx,dp-snd-codec = <&xlnx_dp_snd_codec0>;
+ };
+
+ xlnx_dp_snd_codec0: dp_snd_codec0 {
+ compatible = "xlnx,dp-snd-codec";
+ status = "disabled";
+ clock-names = "aud_clk";
+ };
+
+ xlnx_dp_snd_pcm0: dp_snd_pcm0 {
+ compatible = "xlnx,dp-snd-pcm";
+ status = "disabled";
+ dmas = <&xlnx_dpdma 4>;
+ dma-names = "tx";
+ };
+
+ xlnx_dp_snd_pcm1: dp_snd_pcm1 {
+ compatible = "xlnx,dp-snd-pcm";
+ status = "disabled";
+ dmas = <&xlnx_dpdma 5>;
+ dma-names = "tx";
+ };
+
+ xlnx_dp_sub: dp_sub at 43c0a000 {
+ compatible = "xlnx,dp-sub";
+ status = "disabled";
+ reg = <0x0 0xfd4aa000 0x1000>, <0x0 0xfd4ab000 0x1000>, <0x0 0xfd4ac000 0x1000>;
+ reg-names = "blend", "av_buf", "aud";
+ xlnx,output-fmt = "rgb";
+ };
+
+ xlnx_dpdma: dma at fd4c0000 {
+ compatible = "xlnx,dpdma";
+ status = "disabled";
+ reg = <0x0 0xfd4c0000 0x1000>;
+ interrupts = <0 122 4>;
+ interrupt-parent = <&gic>;
+ clock-names = "axi_clk";
+ dma-channels = <6>;
+ #dma-cells = <1>;
+ dma-video0channel at 43c10000 {
+ compatible = "xlnx,video0";
+ };
+ dma-video1channel at 43c10000 {
+ compatible = "xlnx,video1";
+ };
+ dma-video2channel at 43c10000 {
+ compatible = "xlnx,video2";
+ };
+ dma-graphicschannel at 43c10000 {
+ compatible = "xlnx,graphics";
+ };
+ dma-audio0channel at 43c10000 {
+ compatible = "xlnx,audio0";
+ };
+ dma-audio1channel at 43c10000 {
+ compatible = "xlnx,audio1";
+ };
+ };
+ };
+};
--
2.5.0
More information about the U-Boot
mailing list