[U-Boot] [PATCH v3] colibri_vf: Add board_usb_phy_mode function

[Stefan Agner]

On 2015-10-30 09:24, Marek Vasut wrote:
> On Friday, October 30, 2015 at 05:12:54 PM, Stefan Agner wrote:
>> Hi All,
> 
> Hi!
> 
>> On 2015-10-30 05:26, Sanchayan Maity wrote:
>> > +
>> > +int board_usb_phy_mode(int port)
>> > +{
>> > +	switch (port) {
>> > +	case 0:
>> > +		return gpio_get_value(USB_CDET_GPIO);
>> > +		break;
>> > +	case 1:
>> > +		return USB_INIT_HOST;
>> > +		break;
>> > +	default:
>> > +		return USB_INIT_HOST;
>> > +		break;
>>
>> One thing I would like to note in this whole discussion is that the old
>> setup is kind of the "default" role of each dual-role controller: The
>> boot ROM uses USB1 as client, the tower board uses this configuration
>> too... So maybe we could/should keep that default role at least in here?
> 
> Well we cannot, since this is a custom board, right ?

Ah sorry, the switch statement is enumerating the port numbers, hence
this default refers to ports > 2. Somehow read that the wrong way
around.

Sorry for the noise.

--
Stefan