[U-Boot] [PATCH] gpio: atmel: Add the PIO4 driver support
Andreas Bießmann
andreas.devel at googlemail.com
Sat Oct 31 22:54:23 CET 2015
Hi Wenyou,
sorry for long delay ...
On 08.09.15 08:33, Wenyou Yang wrote:
> The PIO4 is introduced from SAMA5D2, as a new version
> for Atmel PIO controller.
>
> Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
> ---
>
> arch/arm/mach-at91/include/mach/atmel_pio4.h | 48 +++++
> drivers/gpio/Kconfig | 11 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/atmel_pio4.c | 278 ++++++++++++++++++++++++++
> 4 files changed, 338 insertions(+)
> create mode 100644 arch/arm/mach-at91/include/mach/atmel_pio4.h
> create mode 100644 drivers/gpio/atmel_pio4.c
>
> diff --git a/arch/arm/mach-at91/include/mach/atmel_pio4.h b/arch/arm/mach-at91/include/mach/atmel_pio4.h
> new file mode 100644
> index 0000000..5748da6
> --- /dev/null
> +++ b/arch/arm/mach-at91/include/mach/atmel_pio4.h
> @@ -0,0 +1,48 @@
> +/*
> + * Copyright (C) 2015 Atmel Corporation.
> + * Wenyou Yang <wenyou.yang at atmel.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __ATMEL_PIO4_H
> +#define __ATMEL_PIO4_H
> +
> +#ifndef __ASSEMBLY__
> +
> +struct atmel_pio4_port {
> + u32 mskr; /* 0x00 PIO Mask Register */
> + u32 cfgr; /* 0x04 PIO Configuration Register */
> + u32 pdsr; /* 0x08 PIO Pin Data Status Register */
> + u32 locksr; /* 0x0C PIO Lock Status Register */
> + u32 sodr; /* 0x10 PIO Set Output Data Register */
> + u32 codr; /* 0x14 PIO Clear Output Data Register */
> + u32 odsr; /* 0x18 PIO Output Data Status Register */
> + u32 reserved0;
> + u32 ier; /* 0x20 PIO Interrupt Enable Register */
> + u32 idr; /* 0x24 PIO Interrupt Disable Register */
> + u32 imr; /* 0x28 PIO Interrupt Mask Register */
> + u32 isr; /* 0x2C PIO Interrupt Status Register */
> + u32 reserved1[3];
> + u32 iofr; /* 0x3C PIO I/O Freeze Register */
> +};
> +
> +#endif
> +
> +#define AT91_PIO_PORTA 0x0
> +#define AT91_PIO_PORTB 0x1
> +#define AT91_PIO_PORTC 0x2
> +#define AT91_PIO_PORTD 0x3
> +
> +int atmel_pio4_set_gpio(u32 port, u32 pin, u32 use_pullup);
> +int atmel_pio4_set_a_periph(u32 port, u32 pin, u32 use_pullup);
> +int atmel_pio4_set_b_periph(u32 port, u32 pin, u32 use_pullup);
> +int atmel_pio4_set_c_periph(u32 port, u32 pin, u32 use_pullup);
> +int atmel_pio4_set_d_periph(u32 port, u32 pin, u32 use_pullup);
> +int atmel_pio4_set_e_periph(u32 port, u32 pin, u32 use_pullup);
> +int atmel_pio4_set_f_periph(u32 port, u32 pin, u32 use_pullup);
> +int atmel_pio4_set_g_periph(u32 port, u32 pin, u32 use_pullup);
> +void atmel_pio4_set_pio_output(u32 port, u32 pin, u32 value);
> +u32 atmel_pio4_get_pio_input(u32 port, u32 pin);
> +
> +#endif
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index ef57a89..ddc47c6 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -21,6 +21,17 @@ config DWAPB_GPIO
> help
> Support for the Designware APB GPIO driver.
>
> +config ATMEL_PIO4
> + bool "ATMEL PIO4 driver"
> + depends on DM
> + default n
> + help
> + Say yes here to support the Atmel PIO4 driver.
> + The PIO4 is new version of Atmel PIO controller, which manages
> + up to 128 fully programmable input/output lines. Each I/O line
> + may be dedicated as a general purpose I/O or be assigned to
> + a function of an embedded peripheral.
> +
> config LPC32XX_GPIO
> bool "LPC32XX GPIO driver"
> depends on DM
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index c58aa4d..fb4fd25 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -12,6 +12,7 @@ endif
> obj-$(CONFIG_DM_GPIO) += gpio-uclass.o
>
> obj-$(CONFIG_AT91_GPIO) += at91_gpio.o
> +obj-$(CONFIG_ATMEL_PIO4) += atmel_pio4.o
> obj-$(CONFIG_INTEL_ICH6_GPIO) += intel_ich6_gpio.o
> obj-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
> obj-$(CONFIG_KONA_GPIO) += kona_gpio.o
> diff --git a/drivers/gpio/atmel_pio4.c b/drivers/gpio/atmel_pio4.c
> new file mode 100644
> index 0000000..21095ce
> --- /dev/null
> +++ b/drivers/gpio/atmel_pio4.c
> @@ -0,0 +1,278 @@
> +/*
> + * Atmel PIO4 device driver
> + *
> + * Copyright (C) 2015 Atmel Corporation
> + * Wenyou.Yang <wenyou.yang at atmel.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +#include <common.h>
> +#include <dm.h>
> +#include <asm/arch/hardware.h>
> +#include <mach/gpio.h>
> +#include <mach/atmel_pio4.h>
> +
> +#define ATMEL_PIO4_PINS_PER_BANK 32
> +
> +/*
> + * Register Field Definitions
> + */
> +#define ATMEL_PIO4_CFGR_FUNC (0x07 << 0)
> +#define ATMEL_PIO4_CFGR_FUNC_GPIO (0x0 << 0)
> +#define ATMEL_PIO4_CFGR_FUNC_PERIPH_A (0x1 << 0)
> +#define ATMEL_PIO4_CFGR_FUNC_PERIPH_B (0x2 << 0)
> +#define ATMEL_PIO4_CFGR_FUNC_PERIPH_C (0x3 << 0)
> +#define ATMEL_PIO4_CFGR_FUNC_PERIPH_D (0x4 << 0)
> +#define ATMEL_PIO4_CFGR_FUNC_PERIPH_E (0x5 << 0)
> +#define ATMEL_PIO4_CFGR_FUNC_PERIPH_F (0x6 << 0)
> +#define ATMEL_PIO4_CFGR_FUNC_PERIPH_G (0x7 << 0)
> +#define ATMEL_PIO4_CFGR_DIR (0x01 << 8)
> +#define ATMEL_PIO4_CFGR_PUEN (0x01 << 9)
> +#define ATMEL_PIO4_CFGR_PDEN (0x01 << 10)
> +#define ATMEL_PIO4_CFGR_IFEN (0x01 << 12)
> +#define ATMEL_PIO4_CFGR_IFSCEN (0x01 << 13)
> +#define ATMEL_PIO4_CFGR_OPD (0x01 << 14)
> +#define ATMEL_PIO4_CFGR_SCHMITT (0x01 << 15)
> +#define ATMEL_PIO4_CFGR_DRVSTR (0x03 << 16)
> +#define ATMEL_PIO4_CFGR_DRVSTR_HIGH (0x00 << 16)
> +#define ATMEL_PIO4_CFGR_DRVSTR_MEDIUM (0x01 << 16)
> +#define ATMEL_PIO4_CFGR_DRVSTR_LOW (0x02 << 16)
current datasheet have this set to 0/1 LO, 2 MED, 3 HI
> +#define ATMEL_PIO4_CFGR_EVTSEL (0x07 << 24)
> +#define ATMEL_PIO4_CFGR_EVTSEL_FALLING (0x00 << 24)
> +#define ATMEL_PIO4_CFGR_EVTSEL_RISING (0x01 << 24)
> +#define ATMEL_PIO4_CFGR_EVTSEL_BOTH (0x02 << 24)
> +#define ATMEL_PIO4_CFGR_EVTSEL_LOW (0x03 << 24)
> +#define ATMEL_PIO4_CFGR_EVTSEL_HIGH (0x04 << 24)
> +#define ATMEL_PIO4_CFGR_PCFS (0x01 << 29)
> +#define ATMEL_PIO4_CFGR_ICFS (0x01 << 30)
> +#define ATMEL_PIO4_CFGR_TAMPEN (0x01 << 31)
current datasheet have no TAMPEN at bit 31.
> +
> +static struct atmel_pio4_port *atmel_pio4_port_base(u32 port)
> +{
> + struct atmel_pio4_port *base = NULL;
> +
> + switch (port) {
> + case AT91_PIO_PORTA:
> + base = (struct atmel_pio4_port *)ATMEL_BASE_PIOA;
> + break;
> + case AT91_PIO_PORTB:
> + base = (struct atmel_pio4_port *)ATMEL_BASE_PIOB;
> + break;
> + case AT91_PIO_PORTC:
> + base = (struct atmel_pio4_port *)ATMEL_BASE_PIOC;
> + break;
> + case AT91_PIO_PORTD:
> + base = (struct atmel_pio4_port *)ATMEL_BASE_PIOD;
> + break;
> + default:
> + printf("Error: Atmel PIO4: Failed to get PIO base!\n");
The input would be of interest here ... could you add 'port' to printf?
> + break;
> + }
> +
> + return base;
> +}
> +
> +static int atmel_pio4_config_io_func(u32 port, u32 pin,
> + u32 func, u32 use_pullup)
> +{
> + struct atmel_pio4_port *port_base;
> + u32 reg, mask;
> +
> + if (pin >= ATMEL_PIO4_PINS_PER_BANK)
> + return -1;
-ENODEV
> +
> + port_base = atmel_pio4_port_base(port);
port_base may be NULL, please check and return -ENODEV
> + mask = 1 << pin;
> + reg = func;
> + reg |= use_pullup ? ATMEL_PIO4_CFGR_PUEN : 0;
> +
> + writel(mask, &port_base->mskr);
> + writel(reg, &port_base->cfgr);
> +
> + return 0;
> +}
> +
> +int atmel_pio4_set_gpio(u32 port, u32 pin, u32 use_pullup)
> +{
> + return atmel_pio4_config_io_func(port, pin,
> + ATMEL_PIO4_CFGR_FUNC_GPIO,
> + use_pullup);
> +}
> +
> +int atmel_pio4_set_a_periph(u32 port, u32 pin, u32 use_pullup)
> +{
> + return atmel_pio4_config_io_func(port, pin,
> + ATMEL_PIO4_CFGR_FUNC_PERIPH_A,
> + use_pullup);
> +}
> +
> +int atmel_pio4_set_b_periph(u32 port, u32 pin, u32 use_pullup)
> +{
> + return atmel_pio4_config_io_func(port, pin,
> + ATMEL_PIO4_CFGR_FUNC_PERIPH_B,
> + use_pullup);
> +}
> +
> +int atmel_pio4_set_c_periph(u32 port, u32 pin, u32 use_pullup)
> +{
> + return atmel_pio4_config_io_func(port, pin,
> + ATMEL_PIO4_CFGR_FUNC_PERIPH_C,
> + use_pullup);
> +}
> +
> +int atmel_pio4_set_d_periph(u32 port, u32 pin, u32 use_pullup)
> +{
> + return atmel_pio4_config_io_func(port, pin,
> + ATMEL_PIO4_CFGR_FUNC_PERIPH_D,
> + use_pullup);
> +}
> +
> +int atmel_pio4_set_e_periph(u32 port, u32 pin, u32 use_pullup)
> +{
> + return atmel_pio4_config_io_func(port, pin,
> + ATMEL_PIO4_CFGR_FUNC_PERIPH_E,
> + use_pullup);
> +}
> +
> +int atmel_pio4_set_f_periph(u32 port, u32 pin, u32 use_pullup)
> +{
> + return atmel_pio4_config_io_func(port, pin,
> + ATMEL_PIO4_CFGR_FUNC_PERIPH_F,
> + use_pullup);
> +}
> +
> +int atmel_pio4_set_g_periph(u32 port, u32 pin, u32 use_pullup)
> +{
> + return atmel_pio4_config_io_func(port, pin,
> + ATMEL_PIO4_CFGR_FUNC_PERIPH_G,
> + use_pullup);
> +}
> +
> +void atmel_pio4_set_pio_output(u32 port, u32 pin, u32 value)
> +{
> + struct atmel_pio4_port *port_base;
> + u32 reg, mask;
> +
> + port_base = atmel_pio4_port_base(port);
> + mask = 0x01 << pin;
pin and port may be out of range, please add checks (as in
atmel_pio4_config_io_func())
Or even better, re-use atmel_pio4_config_io_func() here ...
> + reg = ATMEL_PIO4_CFGR_FUNC_GPIO | ATMEL_PIO4_CFGR_DIR;
> +
> + writel(mask, &port_base->mskr);
> + writel(reg, &port_base->cfgr);
> +
> + if (value)
> + writel(mask, &port_base->sodr);
> + else
> + writel(mask, &port_base->codr);
> +}
> +
> +u32 atmel_pio4_get_pio_input(u32 port, u32 pin)
> +{
> + struct atmel_pio4_port *port_base;
> + u32 reg, mask;
> +
> + port_base = atmel_pio4_port_base(port);
> + mask = 0x01 << pin;
same as atmel_pio4_set_pio_output() ...
> + reg = ATMEL_PIO4_CFGR_FUNC_GPIO;
> +
> + writel(mask, &port_base->mskr);
> + writel(reg, &port_base->cfgr);
> +
> + return (readl(&port_base->pdsr) & mask) ? 1 : 0;
> +}
> +
> +#ifdef CONFIG_DM_GPIO
> +static int atmel_pio4_direction_input(struct udevice *dev, unsigned offset)
> +{
> + struct at91_port_platdata *plat = dev_get_platdata(dev);
> + struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr;
> + u32 mask = 0x01 << offset;
> + u32 reg = ATMEL_PIO4_CFGR_FUNC_GPIO;
> +
> + writel(mask, &port_base->mskr);
> + writel(reg, &port_base->cfgr);
> +
> + return 0;
> +}
> +
> +static int atmel_pio4_direction_output(struct udevice *dev,
> + unsigned offset, int value)
> +{
> + struct at91_port_platdata *plat = dev_get_platdata(dev);
> + struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr;
> + u32 mask = 0x01 << offset;
> + u32 reg = ATMEL_PIO4_CFGR_FUNC_GPIO | ATMEL_PIO4_CFGR_DIR;
> +
> + writel(mask, &port_base->mskr);
> + writel(reg, &port_base->cfgr);
> +
> + if (value)
> + writel(mask, &port_base->sodr);
> + else
> + writel(mask, &port_base->codr);
> +
> + return 0;
> +}
> +
> +static int atmel_pio4_get_value(struct udevice *dev, unsigned offset)
> +{
> + struct at91_port_platdata *plat = dev_get_platdata(dev);
> + struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr;
> + u32 mask = 0x01 << offset;
> +
> + return (readl(&port_base->pdsr) & mask) ? 1 : 0;
> +}
> +
> +static int atmel_pio4_set_value(struct udevice *dev,
> + unsigned offset, int value)
> +{
> + struct at91_port_platdata *plat = dev_get_platdata(dev);
> + struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr;
> + u32 mask = 0x01 << offset;
> +
> + if (value)
> + writel(mask, &port_base->sodr);
> + else
> + writel(mask, &port_base->codr);
> +
> + return 0;
> +}
> +
> +static int atmel_pio4_get_function(struct udevice *dev, unsigned offset)
> +{
> + struct at91_port_platdata *plat = dev_get_platdata(dev);
> + struct atmel_pio4_port *port_base = (atmel_pio4_port *)plat->base_addr;
> + u32 mask = 0x01 << offset;
> +
> + writel(mask, &port_base->mskr);
> +
> + return (readl(&port_base->cfgr) &
> + ATMEL_PIO4_CFGR_DIR) ? GPIOF_OUTPUT : GPIOF_INPUT;
> +}
> +
> +static const struct dm_gpio_ops atmel_pio4_ops = {
> + .direction_input = atmel_pio4_direction_input,
> + .direction_output = atmel_pio4_direction_output,
> + .get_value = atmel_pio4_get_value,
> + .set_value = atmel_pio4_set_value,
> + .get_function = atmel_pio4_get_function,
> +};
> +
> +static int atmel_pio4_probe(struct udevice *dev)
> +{
> + struct at91_port_platdata *plat = dev_get_platdata(dev);
> + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
> +
> + uc_priv->bank_name = plat->bank_name;
> + uc_priv->gpio_count = ATMEL_PIO4_PINS_PER_BANK;
> +
> + return 0;
> +}
> +
> +U_BOOT_DRIVER(gpio_atmel_pio4) = {
> + .name = "gpio_atmel_pio4",
> + .id = UCLASS_GPIO,
> + .ops = &atmel_pio4_ops,
> + .probe = atmel_pio4_probe,
> +};
> +#endif
>
Andreas
More information about the U-Boot
mailing list