[U-Boot] [PATCH 15/18] dm: video: sandbox: Convert sandbox to use driver model for video

Simon Glass sjg at chromium.org
Tue Jan 5 17:31:11 CET 2016


Now that driver model support is available, convert sandbox over to use it.
We can remove a few of the special hooks that sandbox currently has.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/sandbox/dts/sandbox.dts |  1 +
 board/sandbox/sandbox.c      | 17 --------
 common/lcd.c                 | 11 -----
 configs/sandbox_defconfig    |  1 +
 drivers/serial/sandbox.c     |  5 +--
 drivers/video/sandbox_sdl.c  | 95 ++++++++++++++++++++++----------------------
 include/configs/sandbox.h    | 10 ++---
 include/fdtdec.h             |  1 -
 lib/fdtdec.c                 |  1 -
 9 files changed, 56 insertions(+), 86 deletions(-)

diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts
index d2addb4..e3f02bf 100644
--- a/arch/sandbox/dts/sandbox.dts
+++ b/arch/sandbox/dts/sandbox.dts
@@ -117,6 +117,7 @@
 	};
 
 	lcd {
+		u-boot,dm-pre-reloc;
 		compatible = "sandbox,lcd-sdl";
 		xres = <1366>;
 		yres = <768>;
diff --git a/board/sandbox/sandbox.c b/board/sandbox/sandbox.c
index 592f772..b41e9de 100644
--- a/board/sandbox/sandbox.c
+++ b/board/sandbox/sandbox.c
@@ -47,23 +47,6 @@ int dram_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-int board_early_init_f(void)
-{
-#ifdef CONFIG_VIDEO_SANDBOX_SDL
-	int ret;
-
-	ret = sandbox_lcd_sdl_early_init();
-	if (ret) {
-		puts("Could not init sandbox LCD emulation\n");
-		return ret;
-	}
-#endif
-
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
diff --git a/common/lcd.c b/common/lcd.c
index d29308a..2f3594a 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -31,10 +31,6 @@
 #endif
 #endif
 
-#ifdef CONFIG_SANDBOX
-#include <asm/sdl.h>
-#endif
-
 #ifndef CONFIG_LCD_ALIGNMENT
 #define CONFIG_LCD_ALIGNMENT PAGE_SIZE
 #endif
@@ -72,13 +68,6 @@ void lcd_sync(void)
 	if (lcd_flush_dcache)
 		flush_dcache_range((u32)lcd_base,
 			(u32)(lcd_base + lcd_get_size(&line_length)));
-#elif defined(CONFIG_SANDBOX) && defined(CONFIG_VIDEO_SANDBOX_SDL)
-	static ulong last_sync;
-
-	if (get_timer(last_sync) > 10) {
-		sandbox_sdl_sync(lcd_base);
-		last_sync = get_timer(0);
-	}
 #endif
 }
 
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index e4b8412..3b6017f 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -76,6 +76,7 @@ CONFIG_USB_EMUL=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_KEYBOARD=y
 CONFIG_SYS_USB_EVENT_POLL=y
+CONFIG_DM_VIDEO=y
 CONFIG_VIDEO_SANDBOX_SDL=y
 CONFIG_SYS_VSNPRINTF=y
 CONFIG_CMD_DHRYSTONE=y
diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c
index cd2f91e..45dff98 100644
--- a/drivers/serial/sandbox.c
+++ b/drivers/serial/sandbox.c
@@ -16,6 +16,7 @@
 #include <lcd.h>
 #include <os.h>
 #include <serial.h>
+#include <video.h>
 #include <linux/compiler.h>
 #include <asm/state.h>
 
@@ -114,9 +115,7 @@ static int sandbox_serial_pending(struct udevice *dev, bool input)
 		return 0;
 
 	os_usleep(100);
-#ifdef CONFIG_LCD
-	lcd_sync();
-#endif
+	video_sync_all();
 	if (next_index == serial_buf_read)
 		return 1;	/* buffer full */
 
diff --git a/drivers/video/sandbox_sdl.c b/drivers/video/sandbox_sdl.c
index ba4578e..450628e 100644
--- a/drivers/video/sandbox_sdl.c
+++ b/drivers/video/sandbox_sdl.c
@@ -5,75 +5,76 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <fdtdec.h>
-#include <lcd.h>
-#include <malloc.h>
+#include <video.h>
 #include <asm/sdl.h>
 #include <asm/u-boot-sandbox.h>
+#include <dm/test.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 enum {
-	/* Maximum LCD size we support */
+	/* Default LCD size we support */
 	LCD_MAX_WIDTH		= 1366,
 	LCD_MAX_HEIGHT		= 768,
-	LCD_MAX_LOG2_BPP	= 4,		/* 2^4 = 16 bpp */
 };
 
-vidinfo_t panel_info;
 
-void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
-{
-}
+/* This platform data is needed in tests, so declare it here */
+struct sandbox_sdl_plat {
+	int xres;
+	int yres;
+	int bpix;
+	int rot;
+};
 
-void lcd_ctrl_init(void *lcdbase)
+static int sandbox_sdl_probe(struct udevice *dev)
 {
-	/*
-	 * Allocate memory to keep BMP color conversion map. This is required
-	 * for 8 bit BMPs only (hence 256 colors). If malloc fails - keep
-	 * going, it is not even clear if displyaing the bitmap will be
-	 * required on the way up.
-	 */
-	panel_info.cmap = malloc(256 * NBITS(panel_info.vl_bpix) / 8);
-}
+	struct sandbox_sdl_plat *plat = dev_get_platdata(dev);
+	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+	int ret;
 
-void lcd_enable(void)
-{
-	if (sandbox_sdl_init_display(panel_info.vl_col, panel_info.vl_row,
-				     panel_info.vl_bpix))
+	ret = sandbox_sdl_init_display(plat->xres, plat->yres, plat->bpix);
+	if (ret) {
 		puts("LCD init failed\n");
+		return ret;
+	}
+	uc_priv->xsize = plat->xres;
+	uc_priv->ysize = plat->yres;
+	uc_priv->bpix = plat->bpix;
+	uc_priv->rot = plat->rot;
+
+	return 0;
 }
 
-int sandbox_lcd_sdl_early_init(void)
+static int sandbox_sdl_bind(struct udevice *dev)
 {
+	struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
+	struct sandbox_sdl_plat *plat = dev_get_platdata(dev);
 	const void *blob = gd->fdt_blob;
-	int xres = LCD_MAX_WIDTH, yres = LCD_MAX_HEIGHT;
-	int node;
+	int node = dev->of_offset;
 	int ret = 0;
 
-	/*
-	 * The code in common/lcd.c does not cope with not being able to
-	 * set up a frame buffer. It will just happily keep writing to
-	 * invalid memory. So here we make sure that at least some buffer
-	 * is available even if it actually won't be displayed.
-	 */
-	node = fdtdec_next_compatible(blob, 0, COMPAT_SANDBOX_LCD_SDL);
-	if (node >= 0) {
-		xres = fdtdec_get_int(blob, node, "xres", LCD_MAX_WIDTH);
-		yres = fdtdec_get_int(blob, node, "yres", LCD_MAX_HEIGHT);
-		if (xres < 0 || xres > LCD_MAX_WIDTH) {
-			xres = LCD_MAX_WIDTH;
-			ret = -EINVAL;
-		}
-		if (yres < 0 || yres > LCD_MAX_HEIGHT) {
-			yres = LCD_MAX_HEIGHT;
-			ret = -EINVAL;
-		}
-	}
-
-	panel_info.vl_col = xres;
-	panel_info.vl_row = yres;
-	panel_info.vl_bpix = LCD_COLOR16;
+	plat->xres = fdtdec_get_int(blob, node, "xres", LCD_MAX_WIDTH);
+	plat->yres = fdtdec_get_int(blob, node, "yres", LCD_MAX_HEIGHT);
+	plat->bpix = VIDEO_BPP16;
+	uc_plat->size = plat->xres * plat->yres * (1 << plat->bpix) / 8;
+	debug("%s: Frame buffer size %x\n", __func__, uc_plat->size);
 
 	return ret;
 }
+
+static const struct udevice_id sandbox_sdl_ids[] = {
+	{ .compatible = "sandbox,lcd-sdl" },
+	{ }
+};
+
+U_BOOT_DRIVER(sdl_sandbox) = {
+	.name	= "sdl_sandbox",
+	.id	= UCLASS_VIDEO,
+	.of_match = sandbox_sdl_ids,
+	.bind	= sandbox_sdl_bind,
+	.probe	= sandbox_sdl_probe,
+	.platdata_auto_alloc_size	= sizeof(struct sandbox_sdl_plat),
+};
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index e1be603..23ae44c 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -158,9 +158,7 @@
 
 /* LCD and keyboard require SDL support */
 #ifdef CONFIG_SANDBOX_SDL
-#define CONFIG_LCD
 #define CONFIG_CMD_BMP
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define LCD_BPP			LCD_COLOR16
@@ -169,12 +167,12 @@
 #define CONFIG_KEYBOARD
 
 #define SANDBOX_SERIAL_SETTINGS		"stdin=serial,cros-ec-keyb,usbkbd\0" \
-					"stdout=serial,lcd\0" \
-					"stderr=serial,lcd\0"
+					"stdout=serial,lcd.vidconsole\0" \
+					"stderr=serial,lcd.vidconsole\0"
 #else
 #define SANDBOX_SERIAL_SETTINGS		"stdin=serial\0" \
-					"stdout=serial,lcd\0" \
-					"stderr=serial,lcd\0"
+					"stdout=serial,lcd.vidconsole\0" \
+					"stderr=serial,lcd.vidconsole\0"
 #endif
 
 #define SANDBOX_ETH_SETTINGS		"ethaddr=00:00:11:22:33:44\0" \
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 018d151..954036e 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -151,7 +151,6 @@ enum fdt_compat_id {
 	COMPAT_GENERIC_SPI_FLASH,	/* Generic SPI Flash chip */
 	COMPAT_MAXIM_98095_CODEC,	/* MAX98095 Codec */
 	COMPAT_SAMSUNG_EXYNOS5_I2C,	/* Exynos5 High Speed I2C Controller */
-	COMPAT_SANDBOX_LCD_SDL,		/* Sandbox LCD emulation with SDL */
 	COMPAT_SAMSUNG_EXYNOS_SYSMMU,	/* Exynos sysmmu */
 	COMPAT_INTEL_MICROCODE,		/* Intel microcode update */
 	COMPAT_MEMORY_SPD,		/* Memory SPD information */
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index f6f23ae..a0e7be7 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -56,7 +56,6 @@ static const char * const compat_names[COMPAT_COUNT] = {
 	COMPAT(GENERIC_SPI_FLASH, "spi-flash"),
 	COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"),
 	COMPAT(SAMSUNG_EXYNOS5_I2C, "samsung,exynos5-hsi2c"),
-	COMPAT(SANDBOX_LCD_SDL, "sandbox,lcd-sdl"),
 	COMPAT(SAMSUNG_EXYNOS_SYSMMU, "samsung,sysmmu-v3.3"),
 	COMPAT(INTEL_MICROCODE, "intel,microcode"),
 	COMPAT(MEMORY_SPD, "memory-spd"),
-- 
2.6.0.rc2.230.g3dd15c0



More information about the U-Boot mailing list