[U-Boot] [PATCH 3/4] sunxi: Support PSCI ops on Allwinner H3

[Chen-Yu Tsai]

H3 has the same power sequencing procedure as the A31/A31s, which
includes the power clamps.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm/cpu/armv7/sunxi/psci_sun6i.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv7/sunxi/psci_sun6i.S b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S
index 4ff46e4..90b5bfd 100644
--- a/arch/arm/cpu/armv7/sunxi/psci_sun6i.S
+++ b/arch/arm/cpu/armv7/sunxi/psci_sun6i.S
@@ -106,7 +106,7 @@ psci_fiq_enter:
 	str	r10, [r8, #0x100]
 	timer_wait r10, ONE_MS
 
-#ifdef CONFIG_MACH_SUN6I
+#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I_H3)
 	@ Activate power clamp
 	lsl	r12, r9, #2		@ x4
 	add	r12, r12, r8
@@ -170,7 +170,7 @@ psci_cpu_on:
 	movw	r0, #(SUNXI_PRCM_BASE & 0xffff)
 	movt	r0, #(SUNXI_PRCM_BASE >> 16)
 
-#ifdef CONFIG_MACH_SUN6I
+#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I_H3)
 	@ Release power clamp
 	lsl	r5, r1, #2	@ 1 register per CPU
 	add	r5, r5, r0	@ PRCM
-- 
2.6.4