[U-Boot] [PATCH 0/8] arm: ls1021atwr: Convert to driver model and enable serial support

[Bin Meng]

Hi Alison,

On Wed, Jan 6, 2016 at 1:31 PM, Huan Wang <alison.wang at nxp.com> wrote:
> Hi,
>
>         I tested this set on my LS1021ATWR board. NOR boot using DUART as serial output is ok. But NOR boot using LPUART as serial output failed. How about your test result?
>

Yes, I tested NOR boot using DUART or LPUART. Both boot. I suspect you
forgot to update the RCW for LPUART, or change the jumper setting
(J19, J20) to route the LPUART signal.

[snip]

Regards,
Bin