[U-Boot] [v2] mmc: fsl_esdhc: fix mmc read/write error on T4080

Yangbo Lu yangbo.lu at nxp.com
Thu Jan 7 09:50:07 CET 2016


Fill the right command type when using CMD12 to stop data transfer.

Signed-off-by: Yangbo Lu <yangbo.lu at nxp.com>
---
Changes for v2:
	- Removed fix for T4160 because other patch had done that
---
 drivers/mmc/fsl_esdhc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index c5054d6..16fb01a 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -107,7 +107,7 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
 
 #if defined(CONFIG_MX53) || defined(CONFIG_PPC_T4240) || \
 	defined(CONFIG_LS102XA) || defined(CONFIG_FSL_LAYERSCAPE) || \
-	defined(CONFIG_PPC_T4160)
+	defined(CONFIG_PPC_T4160) || defined(CONFIG_PPC_T4080)
 	if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
 		xfertyp |= XFERTYP_CMDTYP_ABORT;
 #endif
-- 
2.1.0.27.g96db324



More information about the U-Boot mailing list