[U-Boot] [PATCH v2 2/6] ARM: bootm: Try to use relocated ramdisk

[Jeffy Chen]

After boot_ramdisk_high(), ramdisk would be relocated to
initrd_start & initrd_end, so use them instead of rd_start & rd_end.

Signed-off-by: Jeffy Chen <jeffy.chen at rock-chips.com>

---

Changes in v2:
Add comments.

 arch/arm/lib/bootm.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index a477cae..0838d89 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -225,7 +225,17 @@ static void boot_prep_linux(bootm_headers_t *images)
 		if (BOOTM_ENABLE_MEMORY_TAGS)
 			setup_memory_tags(gd->bd);
 		if (BOOTM_ENABLE_INITRD_TAG) {
-			if (images->rd_start && images->rd_end) {
+			/*
+			 * In boot_ramdisk_high(), it may relocate ramdisk to
+			 * a specified location. And set images->initrd_start &
+			 * images->initrd_end to relocated ramdisk's start/end
+			 * addresses. So use them instead of images->rd_start &
+			 * images->rd_end when possible.
+			 */
+			if (images->initrd_start && images->initrd_end) {
+				setup_initrd_tag(gd->bd, images->initrd_start,
+						 images->initrd_end);
+			} else if (images->rd_start && images->rd_end) {
 				setup_initrd_tag(gd->bd, images->rd_start,
 						 images->rd_end);
 			}
-- 
2.1.4