[U-Boot] [PATCH 2/6] arm: socfpga: add reset manager defines for Arria10

[Marek Vasut]

On Friday, January 08, 2016 at 04:51:19 PM, dinguyen at opensource.altera.com 
wrote:
> From: Dinh Nguyen <dinguyen at opensource.altera.com>
> 
> Add the Arria10 reset manager defines that is used in Linux. Change the
> license to SPDX.

See point 4 of this:
http://www.denx.de/wiki/view/U-Boot/Patches#Attributing_Code_Copyrights_Sign

The commit ID should be in the commit message please.

> Signed-off-by: Dinh Nguyen <dinguyen at opensource.altera.com>
> ---
>  include/dt-bindings/reset/altr,rst-mgr-a10.h | 103
> +++++++++++++++++++++++++++ 1 file changed, 103 insertions(+)
>  create mode 100644 include/dt-bindings/reset/altr,rst-mgr-a10.h
> 
> diff --git a/include/dt-bindings/reset/altr,rst-mgr-a10.h
> b/include/dt-bindings/reset/altr,rst-mgr-a10.h new file mode 100644
> index 0000000..7619ca2
> --- /dev/null
> +++ b/include/dt-bindings/reset/altr,rst-mgr-a10.h
> @@ -0,0 +1,103 @@
> +/*
> + * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar at pengutronix.de>
> + *
> + * SPDX-License-Identifier:	GPL-2.0
> + */
> +
> +#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
> +#define _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H
> +
> +/* MPUMODRST */
> +#define CPU0_RESET		0
> +#define CPU1_RESET		1
> +#define WDS_RESET		2
> +#define SCUPER_RESET		3
> +
> +/* PER0MODRST */
> +#define EMAC0_RESET		32
> +#define EMAC1_RESET		33
> +#define EMAC2_RESET		34
> +#define USB0_RESET		35
> +#define USB1_RESET		36
> +#define NAND_RESET		37
> +#define QSPI_RESET		38
> +#define SDMMC_RESET		39
> +#define EMAC0_OCP_RESET		40
> +#define EMAC1_OCP_RESET		41
> +#define EMAC2_OCP_RESET		42
> +#define USB0_OCP_RESET		43
> +#define USB1_OCP_RESET		44
> +#define NAND_OCP_RESET		45
> +#define QSPI_OCP_RESET		46
> +#define SDMMC_OCP_RESET		47
> +#define DMA_RESET		48
> +#define SPIM0_RESET		49
> +#define SPIM1_RESET		50
> +#define SPIS0_RESET		51
> +#define SPIS1_RESET		52
> +#define DMA_OCP_RESET		53
> +#define EMAC_PTP_RESET		54
> +/* 55 is empty*/
> +#define DMAIF0_RESET		56
> +#define DMAIF1_RESET		57
> +#define DMAIF2_RESET		58
> +#define DMAIF3_RESET		59
> +#define DMAIF4_RESET		60
> +#define DMAIF5_RESET		61
> +#define DMAIF6_RESET		62
> +#define DMAIF7_RESET		63
> +
> +/* PER1MODRST */
> +#define L4WD0_RESET		64
> +#define L4WD1_RESET		65
> +#define L4SYSTIMER0_RESET	66
> +#define L4SYSTIMER1_RESET	67
> +#define SPTIMER0_RESET		68
> +#define SPTIMER1_RESET		69
> +/* 70-71 is reserved */
> +#define I2C0_RESET		72
> +#define I2C1_RESET		73
> +#define I2C2_RESET		74
> +#define I2C3_RESET		75
> +#define I2C4_RESET		76
> +/* 77-79 is reserved */
> +#define UART0_RESET		80
> +#define UART1_RESET		81
> +/* 82-87 is reserved */
> +#define GPIO0_RESET		88
> +#define GPIO1_RESET		89
> +#define GPIO2_RESET		90
> +
> +/* BRGMODRST */
> +#define HPS2FPGA_RESET		96
> +#define LWHPS2FPGA_RESET	97
> +#define FPGA2HPS_RESET		98
> +#define F2SSDRAM0_RESET		99
> +#define F2SSDRAM1_RESET		100
> +#define F2SSDRAM2_RESET		101
> +#define DDRSCH_RESET		102
> +
> +/* SYSMODRST*/
> +#define ROM_RESET		128
> +#define OCRAM_RESET		129
> +/* 130 is reserved */
> +#define FPGAMGR_RESET		131
> +#define S2F_RESET		132
> +#define SYSDBG_RESET		133
> +#define OCRAM_OCP_RESET		134
> +
> +/* COLDMODRST */
> +#define CLKMGRCOLD_RESET	160
> +/* 161-162 is reserved */
> +#define S2FCOLD_RESET		163
> +#define TIMESTAMPCOLD_RESET	164
> +#define TAPCOLD_RESET		165
> +#define HMCCOLD_RESET		166
> +#define IOMGRCOLD_RESET		167
> +
> +/* NRSTMODRST */
> +#define NRSTPINOE_RESET		192
> +
> +/* DBGMODRST */
> +#define DBG_RESET		224
> +#endif