[U-Boot] [Patch V3 4/4] dm: env_sf: fix saveenv() to use driver model

Qianyu Gong qianyu.gong at nxp.com
Mon Jan 11 02:32:21 CET 2016


> -----Original Message-----
> From: Jagan Teki [mailto:jteki at openedev.com]
> Sent: Saturday, January 09, 2016 1:07 AM
> To: Qianyu Gong <qianyu.gong at nxp.com>
> Cc: u-boot at lists.denx.de; Gong Qianyu <Qianyu.Gong at freescale.com>; Yao Yuan
> <yao.yuan at nxp.com>; Mingkai Hu <mingkai.hu at nxp.com>
> Subject: Re: [U-Boot] [Patch V3 4/4] dm: env_sf: fix saveenv() to use driver model
> 
> On 8 January 2016 at 12:57, Gong Qianyu <Qianyu.Gong at nxp.com> wrote:
> > From: Gong Qianyu <Qianyu.Gong at freescale.com>
> >
> > It might be missed when converting spi_flash_probe() in cmd_sf.c.
> >
> > This commit refers to fbb099183e3a53f77a975964cdf2e73d11e565af.
> >
> > Signed-off-by: Gong Qianyu <Qianyu.Gong at freescale.com>
> > ---
> > V3:
> >  - Remove redundant operations for saveenv()
> > V2:
> >  - New patch.
> >
> >  common/env_sf.c | 35 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 35 insertions(+)
> >
> > diff --git a/common/env_sf.c b/common/env_sf.c index 9409831..fd0c82a
> > 100644
> > --- a/common/env_sf.c
> > +++ b/common/env_sf.c
> > @@ -16,6 +16,7 @@
> >  #include <spi_flash.h>
> >  #include <search.h>
> >  #include <errno.h>
> > +#include <dm/device-internal.h>
> >
> >  #ifndef CONFIG_ENV_SPI_BUS
> >  # define CONFIG_ENV_SPI_BUS    0
> > @@ -51,6 +52,22 @@ int saveenv(void)
> >         char    *saved_buffer = NULL, flag = OBSOLETE_FLAG;
> >         u32     saved_size, saved_offset, sector = 1;
> >         int     ret;
> > +#ifdef CONFIG_DM_SPI_FLASH
> > +       struct udevice *new;
> > +       unsigned int bus = CONFIG_SF_DEFAULT_BUS;
> > +       unsigned int cs = CONFIG_SF_DEFAULT_CS;
> > +       unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
> > +       unsigned int mode = CONFIG_SF_DEFAULT_MODE;
> 
> non-dm uses CONFIG_ENV_ *  may be we can use the same?
> 

Yes, you're right.

> > +
> > +       ret = spi_flash_probe_bus_cs(bus, cs, speed, mode, &new);
> 
> Call the macros directly instead of assigning with variables since there is no
> updates on these further.
> 

There is really a problem to match it with non-dm code.
I will also adjust the printf format below.

Qianyu

> > +       if (ret) {
> > +               printf("Failed to initialize SPI flash at %u:%u (error %d)\n",
> > +                      bus, cs, ret);
> > +               return 1;
> > +       }
> > +
> > +       env_flash = dev_get_uclass_priv(new); #else
> >
> >         if (!env_flash) {
> >                 env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS,
> > @@ -61,6 +78,7 @@ int saveenv(void)
> >                         return 1;
> >                 }
> >         }
> > +#endif
> >
> >         ret = env_export(&env_new);
> >         if (ret)
> > @@ -227,6 +245,22 @@ int saveenv(void)
> >         char    *saved_buffer = NULL;
> >         int     ret = 1;
> >         env_t   env_new;
> > +#ifdef CONFIG_DM_SPI_FLASH
> > +       struct udevice *new;
> > +       unsigned int bus = CONFIG_SF_DEFAULT_BUS;
> > +       unsigned int cs = CONFIG_SF_DEFAULT_CS;
> > +       unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
> > +       unsigned int mode = CONFIG_SF_DEFAULT_MODE;
> > +
> > +       ret = spi_flash_probe_bus_cs(bus, cs, speed, mode, &new);
> > +       if (ret) {
> > +               printf("Failed to initialize SPI flash at %u:%u (error %d)\n",
> > +                      bus, cs, ret);
> > +               return 1;
> > +       }
> > +
> > +       env_flash = dev_get_uclass_priv(new); #else
> >
> >         if (!env_flash) {
> >                 env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS,
> > @@ -237,6 +271,7 @@ int saveenv(void)
> >                         return 1;
> >                 }
> >         }
> > +#endif
> >
> >         /* Is the sector larger than the env (i.e. embedded) */
> >         if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
> > --
> > 2.1.0.27.g96db324
> >
> 
> --
> Jagan.


More information about the U-Boot mailing list