[U-Boot] [PATCH v2 3/4] sunxi: add support for LPDDR3 for A83T
Vishnu Patekar
vishnupatekar0510 at gmail.com
Mon Jan 11 18:20:59 CET 2016
Banana-pi M3 has LPDDR3 DRAM. this adds support for LPDDR3 for A83T.
Mostly the timing parameters are different from DDR3.
Signed-off-by: Vishnu Patekar <vishnupatekar0510 at gmail.com>
---
arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c | 54 ++++++++++++++++++++---
arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h | 5 +++
2 files changed, 54 insertions(+), 5 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c
index 35b6c5e..7c46acd 100644
--- a/arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c
+++ b/arch/arm/cpu/armv7/sunxi/dram_sun8i_a83t.c
@@ -131,10 +131,42 @@ static void auto_set_timing_para(struct dram_para *para)
/* Set work mode register */
mctl_set_cr(para);
/* Set mode register */
- writel(MCTL_MR0, &mctl_ctl->mr0);
- writel(MCTL_MR1, &mctl_ctl->mr1);
- writel(MCTL_MR2, &mctl_ctl->mr2);
- writel(MCTL_MR3, &mctl_ctl->mr3);
+ if (para->dram_type == DRAM_TYPE_DDR3) {
+ writel(MCTL_MR0, &mctl_ctl->mr0);
+ writel(MCTL_MR1, &mctl_ctl->mr1);
+ writel(MCTL_MR2, &mctl_ctl->mr2);
+ writel(MCTL_MR3, &mctl_ctl->mr3);
+ } else if (para->dram_type == DRAM_TYPE_LPDDR3) {
+ writel(MCTL_LPDDR3_MR0, &mctl_ctl->mr0);
+ writel(MCTL_LPDDR3_MR1, &mctl_ctl->mr1);
+ writel(MCTL_LPDDR3_MR2, &mctl_ctl->mr2);
+ writel(MCTL_LPDDR3_MR3, &mctl_ctl->mr3);
+
+ /* timing parameters for LPDDR3 */
+ tfaw = max(ns_to_t(50), 4);
+ trrd = max(ns_to_t(10), 2);
+ trcd = max(ns_to_t(24), 2);
+ trc = ns_to_t(70);
+ txp = max(ns_to_t(8), 2);
+ twtr = max(ns_to_t(8), 2);
+ trtp = max(ns_to_t(8), 2);
+ trp = max(ns_to_t(27), 2);
+ tras = ns_to_t(42);
+ trefi = ns_to_t(3900) / 32;
+ trfc = ns_to_t(210);
+ tmrw = 5;
+ tmrd = 5;
+ tckesr = 5;
+ tcwl = 3; /* CWL 8 */
+ t_rdata_en = 5;
+ tdinit0 = (200 * CONFIG_DRAM_CLK) + 1; /* 200us */
+ tdinit1 = (100 * CONFIG_DRAM_CLK) / 1000 + 1; /* 100ns */
+ tdinit2 = (11 * CONFIG_DRAM_CLK) + 1; /* 200us */
+ tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
+ twtp = tcwl + 4 + twr + 1; /* CWL + BL/2 + tWR */
+ twr2rd = tcwl + 4 + 1 + twtr; /* WL + BL / 2 + tWTR */
+ trd2wr = tcl + 4 + 5 - tcwl + 1; /* RL + BL / 2 + 2 - WL */
+ }
/* Set dram timing */
reg_val = (twtp << 24) | (tfaw << 16) | (trasmax << 8) | (tras << 0);
writel(reg_val, &mctl_ctl->dramtmg0);
@@ -289,6 +321,9 @@ static int mctl_channel_init(struct dram_para *para)
clrbits_le32(&mctl_ctl->pgcr2, (0x3 << 6));
clrbits_le32(&mctl_ctl->dqsgmr, (0x1 << 8) | (0x7));
+ if (para->dram_type == DRAM_TYPE_LPDDR3)
+ clrsetbits_le32(&mctl_ctl->dxccr, (0x1 << 27) | (0x3<<6) ,
+ 0x1 << 31);
if (readl(&mctl_com->cr) & 0x1)
writel(0x00000303, &mctl_ctl->odtmap);
else
@@ -299,7 +334,11 @@ static int mctl_channel_init(struct dram_para *para)
clrsetbits_le32(ZQnPR(0), 0x000000ff, CONFIG_DRAM_ZQ & 0xff);
clrsetbits_le32(ZQnPR(1), 0x000000ff, (CONFIG_DRAM_ZQ >> 8) & 0xff);
/* CA calibration */
- mctl_set_pir(0x0201f3 | 0x1<<10);
+
+ if (para->dram_type == DRAM_TYPE_DDR3)
+ mctl_set_pir(0x0201f3 | 0x1<<10);
+ else
+ mctl_set_pir(0x020173 | 0x1<<10);
/* DQS gate training */
if (mctl_train_dram(para) != 0) {
@@ -359,6 +398,7 @@ static void mctl_sys_init(struct dram_para *para)
clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
+ udelay(1000);
clrbits_le32(&ccm->dram_clk_cfg, 0x01<<31);
clock_set_pll5(CONFIG_DRAM_CLK * 1000000 * DRAM_CLK_MUL);
@@ -373,6 +413,10 @@ static void mctl_sys_init(struct dram_para *para)
setbits_le32(&ccm->mbus_reset, CCM_MBUS_RESET_RESET);
setbits_le32(&ccm->mbus_clk_cfg, MBUS_CLK_GATE);
+ para->rank = 2;
+ para->bus_width = 16;
+ mctl_set_cr(para);
+
/* Set dram master access priority */
writel(0x0000e00f, &mctl_ctl->clken); /* normal */
diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h b/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h
index 05b6a89..842ad3c 100644
--- a/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h
+++ b/arch/arm/include/asm/arch-sunxi/dram_sun8i_a83t.h
@@ -198,6 +198,11 @@ struct sunxi_mctl_ctl_reg {
#define MCTL_MR2 0x18 /* CWL=8 */
#define MCTL_MR3 0x0
+#define MCTL_LPDDR3_MR0 0x0
+#define MCTL_LPDDR3_MR1 0xc3 /* twr=8, bl=8 */
+#define MCTL_LPDDR3_MR2 0xa /* RL=12, CWL=6 */
+#define MCTL_LPDDR3_MR3 0x0
+
#define DRAM_TYPE_DDR3 3
#define DRAM_TYPE_LPDDR3 7
#endif /* _SUNXI_DRAM_SUN8I_A83T_H */
--
1.9.1
More information about the U-Boot
mailing list