[U-Boot] [PATCH 0/8] Convert lpuart serial driver to driver model

[Bin Meng]

Hi Bhuvanchandra,

On Tue, Jan 12, 2016 at 2:43 PM, Bhuvanchandra DV
<bhuvanchandra.dv at toradex.com> wrote:
> Hi Bin,
>
>
> On 01/12/2016 11:05 AM, Bin Meng wrote:
>>
>> Hi Bhuvanchandra,
>>
>> On Tue, Jan 12, 2016 at 12:28 PM, Bhuvanchandra DV
>> <bhuvanchandra.dv at toradex.com> wrote:
>>>
>>> - Convert lpuart driver to driver model and remove the legacy code.
>>> - Update Toradex Colibri VF50/VF61 serial support with driver model.
>>> - Update Freescale vf610twr serial support with driver model.
>>> - Update Freescale ls1021atwr serial support with driver model.
>>> - Update Phytec pcm052 serial support with driver model.
>>> - Tested the driver on Toradex Colibri VF50/VF61 hardware.
>>> - Compile checked board files for vf610twr, ls1021atwr and pcm052
>>>    since I don't have access to such hardware at my end. Reviewers
>>>    and testers welcome!
>>>
>>> Bhuvanchandra DV (8):
>>>    dm: lpuart: Add driver model support for the serial driver
>>>    colibri_vf: Update enabling lpuart support with driver model
>>>    arm: vf610twr: Add driver model support
>>>    vf610twr: Update enabling lpuart with driver model
>>>    arm: ls102xa: Add driver model support
>>>    ls1021x: Update enabling lpuart with driver model
>>>    arm: pcm052: Enable driver model support
>>>    pcm052: Update enabling lpuart support with driver model
>>>
>>>   arch/arm/include/asm/arch-ls102xa/serial.h |  16 ++++
>>>   arch/arm/include/asm/arch-vf610/serial.h   |  16 ++++
>>>   board/freescale/ls1021atwr/ls1021atwr.c    |  15 ++-
>>>   board/freescale/vf610twr/vf610twr.c        |  13 +++
>>>   board/phytec/pcm052/pcm052.c               |  13 +++
>>>   board/toradex/colibri_vf/colibri_vf.c      |  13 +++
>>>   configs/ls1021atwr_nor_lpuart_defconfig    |   1 +
>>>   configs/pcm052_defconfig                   |   1 +
>>>   configs/vf610twr_defconfig                 |   1 +
>>>   configs/vf610twr_nand_defconfig            |   1 +
>>>   drivers/serial/Kconfig                     |   6 ++
>>>   drivers/serial/serial_lpuart.c             | 148
>>> +++++++++++++++--------------
>>>   include/configs/colibri_vf.h               |   6 +-
>>>   include/configs/ls1021atwr.h               |   1 +
>>>   include/configs/pcm052.h                   |   6 +-
>>>   include/configs/vf610twr.h                 |   6 +-
>>>   16 files changed, 180 insertions(+), 83 deletions(-)
>>>   create mode 100644 arch/arm/include/asm/arch-ls102xa/serial.h
>>>   create mode 100644 arch/arm/include/asm/arch-vf610/serial.h
>>>
>>> --
>>
>>
>> Please see existing patch series @
>> http://patchwork.ozlabs.org/patch/561855/. You can drop the ls102xa
>> changes and rebase your patch series on top of that. Thanks!
>
>
> We are not aware of this patch set, sorry! about that. You want me to drop
> only the ls102xa changes? How about the changes/updates to the lpuart
> driver? should i update them with your device tree support stuff and rebase
> the remaining patch set along with your Signed-off-by tag ?
> Any suggestions ?
>

I believe you can:
- Drop the LPUART DM conversion patch in your series, which was already done
- Drop the ls1021atwr changes, which was already done
- Do the similar changes to all other boards in your series, by
following ls1021atwr changes in my series
- There is no need to add my SOB tag in your series as I was actually
not doing anything :)

Regards,
Bin