[U-Boot] [PATCH v3 04/14] drivers: pinctrl: Add pinctrl driver for Microchip PIC32.
Purna Chandra Mandal
purna.mandal at microchip.com
Tue Jan 12 11:18:19 CET 2016
In PIC32 pin-controller is a combined gpio-controller, pin-mux and
pin-config module. Remappable peripherals are assigned pins through
per-pin based muxing logic. And pin configuration are performed on
specific port registers which are shared along with gpio controller.
Note, non-remappable peripherals have default pins assigned thus require
no muxing.
Signed-off-by: Purna Chandra Mandal <purna.mandal at microchip.com>
---
Changes in v3:
- read register base from device-tree
- add/update comments to explain how pinctrl'r works.
- replace pic32_ioremap() with ioremap().
Changes in v2:
- add pinconf routine for configuring pin property
drivers/pinctrl/Kconfig | 9 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl_pic32.c | 363 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 373 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl_pic32.c
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 57e6142..292c4e2 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -131,6 +131,15 @@ config PINCTRL_SANDBOX
actually does nothing but print debug messages when pinctrl
operations are invoked.
+config PIC32_PINCTRL
+ bool "Microchip PIC32 pin-control and pin-mux driver"
+ depends on DM && MACH_PIC32
+ help
+ Supports individual pin selection and configuration for each remappable
+ peripheral available on Microchip PIC32 SoCs. This driver is controlled
+ by a device tree node which contains both GPIO defintion and pin control
+ functions.
+
endif
source "drivers/pinctrl/uniphier/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 70d25dc..b4f4650 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_PINCTRL_SANDBOX) += pinctrl-sandbox.o
obj-$(CONFIG_ARCH_UNIPHIER) += uniphier/
+obj-$(CONFIG_PIC32_PINCTRL) += pinctrl_pic32.o
diff --git a/drivers/pinctrl/pinctrl_pic32.c b/drivers/pinctrl/pinctrl_pic32.c
new file mode 100644
index 0000000..5cf97ec
--- /dev/null
+++ b/drivers/pinctrl/pinctrl_pic32.c
@@ -0,0 +1,363 @@
+/*
+ * Pinctrl driver for Microchip PIC32 SoCs
+ * Copyright (c) 2015 Microchip Technology Inc.
+ * Written by Purna Chandra Mandal <purna.mandal at microchip.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <dm/pinctrl.h>
+#include <dm/root.h>
+#include <mach/pic32.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* PIC32 has 10 peripheral ports with 16 pins each.
+ * Ports are marked PORTA-PORTK or PORT0-PORT9.
+ */
+enum {
+ PIC32_PORT_A = 0,
+ PIC32_PORT_B = 1,
+ PIC32_PORT_C = 2,
+ PIC32_PORT_D = 3,
+ PIC32_PORT_E = 4,
+ PIC32_PORT_F = 5,
+ PIC32_PORT_G = 6,
+ PIC32_PORT_H = 7,
+ PIC32_PORT_J = 8, /* no PORT_I */
+ PIC32_PORT_K = 9,
+ PIC32_PINS_PER_PORT = 16,
+};
+
+#define PIN_CONFIG_PIC32_DIGITAL (PIN_CONFIG_END + 1)
+#define PIN_CONFIG_PIC32_ANALOG (PIN_CONFIG_END + 2)
+
+/* pin configuration descriptor */
+struct pic32_pin_config {
+ u16 port; /* port number */
+ u16 pin; /* pin number in the port */
+ u32 config; /* one of PIN_CONFIG_* */
+};
+#define PIN_CONFIG(_prt, _pin, _cfg) \
+ {.port = (_prt), .pin = (_pin), .config = (_cfg), }
+
+/* In PIC32 muxing is performed at pin-level through two
+ * different set of registers - one set for input functions,
+ * and other for output functions.
+ * Pin configuration is handled through port register.
+ */
+/* Port control registers */
+struct pic32_reg_port {
+ struct pic32_reg_atomic ansel;
+ struct pic32_reg_atomic tris;
+ struct pic32_reg_atomic port;
+ struct pic32_reg_atomic lat;
+ struct pic32_reg_atomic odc;
+ struct pic32_reg_atomic cnpu;
+ struct pic32_reg_atomic cnpd;
+ struct pic32_reg_atomic cncon;
+ struct pic32_reg_atomic unused[8];
+};
+
+/* Input function mux registers */
+struct pic32_reg_in_mux {
+ u32 unused0;
+ u32 int1[4];
+ u32 unused1;
+ u32 t2ck[8];
+ u32 ic1[9];
+ u32 unused2;
+ u32 ocfar;
+ u32 unused3;
+ u32 u1rx;
+ u32 u1cts;
+ u32 u2rx;
+ u32 u2cts;
+ u32 u3rx;
+ u32 u3cts;
+ u32 u4rx;
+ u32 u4cts;
+ u32 u5rx;
+ u32 u5cts;
+ u32 u6rx;
+ u32 u6cts;
+ u32 unused4;
+ u32 sdi1;
+ u32 ss1;
+ u32 unused5;
+ u32 sdi2;
+ u32 ss2;
+ u32 unused6;
+ u32 sdi3;
+ u32 ss3;
+ u32 unused7;
+ u32 sdi4;
+ u32 ss4;
+ u32 unused8;
+ u32 sdi5;
+ u32 ss5;
+ u32 unused9;
+ u32 sdi6;
+ u32 ss6;
+ u32 c1rx;
+ u32 c2rx;
+ u32 refclki1;
+ u32 refclki2;
+ u32 refclki3;
+ u32 refclki4;
+};
+
+/* output mux register offset */
+#define PPS_OUT(__port, __pin) \
+ (((__port) * PIC32_PINS_PER_PORT + (__pin)) << 2)
+
+
+struct pic32_pinctrl_priv {
+ struct pic32_reg_in_mux *mux_in; /* mux input function */
+ struct pic32_reg_port *pinconf; /* pin configuration*/
+ void __iomem *mux_out; /* mux output function */
+};
+
+enum {
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+ PERIPH_ID_ETH,
+ PERIPH_ID_USB,
+ PERIPH_ID_SDHCI,
+ PERIPH_ID_I2C1,
+ PERIPH_ID_I2C2,
+ PERIPH_ID_SPI1,
+ PERIPH_ID_SPI2,
+ PERIPH_ID_SQI,
+};
+
+static int pic32_pinconfig_one(struct pic32_pinctrl_priv *priv,
+ u32 port_nr, u32 pin, u32 param)
+{
+ struct pic32_reg_port *port;
+
+ port = &priv->pinconf[port_nr];
+ switch (param) {
+ case PIN_CONFIG_PIC32_DIGITAL:
+ writel(BIT(pin), &port->ansel.clr);
+ break;
+ case PIN_CONFIG_PIC32_ANALOG:
+ writel(BIT(pin), &port->ansel.set);
+ break;
+ case PIN_CONFIG_INPUT_ENABLE:
+ writel(BIT(pin), &port->tris.set);
+ break;
+ case PIN_CONFIG_OUTPUT:
+ writel(BIT(pin), &port->tris.clr);
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ writel(BIT(pin), &port->cnpu.set);
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ writel(BIT(pin), &port->cnpd.set);
+ break;
+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+ writel(BIT(pin), &port->odc.set);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int pic32_pinconfig_set(struct pic32_pinctrl_priv *priv,
+ const struct pic32_pin_config *list, int count)
+{
+ int i;
+
+ for (i = 0 ; i < count; i++)
+ pic32_pinconfig_one(priv, list[i].port,
+ list[i].pin, list[i].config);
+
+ return 0;
+}
+
+static void pic32_eth_pin_config(struct udevice *dev)
+{
+ struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+ const struct pic32_pin_config configs[] = {
+ /* EMDC - D11 */
+ PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_OUTPUT),
+ /* ETXEN */
+ PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_OUTPUT),
+ /* ECRSDV */
+ PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_INPUT_ENABLE),
+ /* ERXD0 */
+ PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_INPUT_ENABLE),
+ PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_BIAS_PULL_DOWN),
+ /* ERXD1 */
+ PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_INPUT_ENABLE),
+ PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_BIAS_PULL_DOWN),
+ /* EREFCLK */
+ PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_INPUT_ENABLE),
+ /* ETXD1 */
+ PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_OUTPUT),
+ /* ETXD0 */
+ PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_OUTPUT),
+ /* EMDIO */
+ PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_INPUT_ENABLE),
+ /* ERXERR */
+ PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_PIC32_DIGITAL),
+ PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_INPUT_ENABLE),
+ };
+
+ pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs));
+}
+
+static int pic32_pinctrl_request(struct udevice *dev, int func, int flags)
+{
+ struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+
+ switch (func) {
+ case PERIPH_ID_UART2:
+ /* PPS for U2 RX/TX */
+ writel(0x02, priv->mux_out + PPS_OUT(PIC32_PORT_G, 9));
+ writel(0x05, &priv->mux_in->u2rx); /* B0 */
+ /* set digital mode */
+ pic32_pinconfig_one(priv, PIC32_PORT_G, 9,
+ PIN_CONFIG_PIC32_DIGITAL);
+ pic32_pinconfig_one(priv, PIC32_PORT_B, 0,
+ PIN_CONFIG_PIC32_DIGITAL);
+ break;
+ case PERIPH_ID_ETH:
+ pic32_eth_pin_config(dev);
+ break;
+ default:
+ debug("%s: unknown-unhandled case\n", __func__);
+ break;
+ }
+
+ return 0;
+}
+
+static int pic32_pinctrl_get_periph_id(struct udevice *dev,
+ struct udevice *periph)
+{
+ int ret;
+ u32 cell[2];
+
+ ret = fdtdec_get_int_array(gd->fdt_blob, periph->of_offset,
+ "interrupts", cell, ARRAY_SIZE(cell));
+ if (ret < 0)
+ return -EINVAL;
+
+ /* interrupt number */
+ switch (cell[0]) {
+ case 112 ... 114:
+ return PERIPH_ID_UART1;
+ case 145 ... 147:
+ return PERIPH_ID_UART2;
+ case 109 ... 111:
+ return PERIPH_ID_SPI1;
+ case 142 ... 144:
+ return PERIPH_ID_SPI2;
+ case 115 ... 117:
+ return PERIPH_ID_I2C1;
+ case 148 ... 150:
+ return PERIPH_ID_I2C2;
+ case 132 ... 133:
+ return PERIPH_ID_USB;
+ case 169:
+ return PERIPH_ID_SQI;
+ case 191:
+ return PERIPH_ID_SDHCI;
+ case 153:
+ return PERIPH_ID_ETH;
+ default:
+ break;
+ }
+
+ return -ENOENT;
+}
+
+static int pic32_pinctrl_set_state_simple(struct udevice *dev,
+ struct udevice *periph)
+{
+ int func;
+
+ debug("%s: periph %s\n", __func__, periph->name);
+ func = pic32_pinctrl_get_periph_id(dev, periph);
+ if (func < 0)
+ return func;
+ return pic32_pinctrl_request(dev, func, 0);
+}
+
+static struct pinctrl_ops pic32_pinctrl_ops = {
+ .set_state_simple = pic32_pinctrl_set_state_simple,
+ .request = pic32_pinctrl_request,
+ .get_periph_id = pic32_pinctrl_get_periph_id,
+};
+
+static int pic32_pinctrl_probe(struct udevice *dev)
+{
+ struct pic32_pinctrl_priv *priv = dev_get_priv(dev);
+ struct fdt_resource res;
+ void *fdt = (void *)gd->fdt_blob;
+ int node = dev->of_offset;
+ int ret;
+
+ ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
+ "ppsin", &res);
+ if (ret < 0) {
+ printf("pinctrl: resource \"ppsin\" not found\n");
+ return ret;
+ }
+ priv->mux_in = ioremap(res.start, fdt_resource_size(&res));
+
+ ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
+ "ppsout", &res);
+ if (ret < 0) {
+ printf("pinctrl: resource \"ppsout\" not found\n");
+ return ret;
+ }
+ priv->mux_out = ioremap(res.start, fdt_resource_size(&res));
+
+ ret = fdt_get_named_resource(fdt, node, "reg", "reg-names",
+ "port", &res);
+ if (ret < 0) {
+ printf("pinctrl: resource \"port\" not found\n");
+ return ret;
+ }
+ priv->pinconf = ioremap(res.start, fdt_resource_size(&res));
+
+ return 0;
+}
+
+static int pic32_pinctrl_bind(struct udevice *dev)
+{
+ /* scan child GPIO banks */
+ return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
+}
+
+static const struct udevice_id pic32_pinctrl_ids[] = {
+ { .compatible = "microchip,pic32mzda-pinctrl" },
+ { }
+};
+
+U_BOOT_DRIVER(pinctrl_pic32) = {
+ .name = "pinctrl_pic32",
+ .id = UCLASS_PINCTRL,
+ .of_match = pic32_pinctrl_ids,
+ .ops = &pic32_pinctrl_ops,
+ .probe = pic32_pinctrl_probe,
+ .bind = pic32_pinctrl_bind,
+ .priv_auto_alloc_size = sizeof(struct pic32_pinctrl_priv),
+};
--
1.8.3.1
More information about the U-Boot
mailing list