[U-Boot] [PATCH v3 03/14] drivers: clk: Add clock driver for Microchip PIC32 Microcontroller.
Daniel Schwierzeck
daniel.schwierzeck at gmail.com
Wed Jan 13 14:38:24 CET 2016
Am Dienstag, den 12.01.2016, 15:48 +0530 schrieb Purna Chandra Mandal:
> PIC32 clock module consists of multiple oscillators, PLLs,
> mutiplexers
> and dividers capable of supplying clock to various controllers
> on or off-chip.
>
> Signed-off-by: Purna Chandra Mandal <purna.mandal at microchip.com>
> Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
nits below
>
> ---
>
> Changes in v3:
> - rename clk-pic32.c to clk_pic32.c
> - update clock binding documentation
> - replace pic32_ioremap() with ioremap()
> - separate MPLL initialization constants
>
> Changes in v2:
> - add mpll get clock rate
>
> .../clock/microchip,pic32-clock.txt | 33 ++
> drivers/clk/Makefile | 1 +
> drivers/clk/clk_pic32.c | 433
> +++++++++++++++++++++
> include/dt-bindings/clock/microchip,clock.h | 29 ++
> 4 files changed, 496 insertions(+)
> create mode 100644 doc/device-tree-bindings/clock/microchip,pic32
> -clock.txt
> create mode 100644 drivers/clk/clk_pic32.c
> create mode 100644 include/dt-bindings/clock/microchip,clock.h
>
> diff --git a/doc/device-tree-bindings/clock/microchip,pic32-clock.txt
> b/doc/device-tree-bindings/clock/microchip,pic32-clock.txt
> new file mode 100644
> index 0000000..02e5ce4
> --- /dev/null
> +++ b/doc/device-tree-bindings/clock/microchip,pic32-clock.txt
> @@ -0,0 +1,33 @@
> +* Microchip PIC32 Clock and Oscillator
> +
> +Microchip PIC32 clock tree consists of few oscillators, PLLs,
> +multiplexers and few divider modules capable of supplying clocks
> +to various controllers within SoC and also to off-chip.
> +
> +PIC32 clock controller output is defined by indices as defined
> +in [0]
> +
> +[0] include/dt-bindings/clock/microchip,clock.h
> +
> +Required Properties:
> +- compatible: should be "microchip,pic32mzda_clk"
> +- reg: physical base address of the controller and length of memory
> mapped
> + region.
> +- #clock-cells: should be 1.
> +
> +Example: Clock controller node:
> +
> + clock: clk at 1f801200 {
> + compatible = "microchip,pic32mzda_clk";
> + reg = <0x1f801200 0x1000>;
> + };
> +
> +Example: UART controller node that consumes the clock generated by
> the clock
> +controller:
> +
> + uart1: serial at 1f822000 {
> + compatible = "microchip,pic32mzda-uart";
> + reg = <0xbf822000 0x50>;
> + interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock PB2CLK>;
> + };
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 4a6a4a8..adda769 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -9,3 +9,4 @@ obj-$(CONFIG_CLK) += clk-uclass.o
> obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o
> obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
> obj-$(CONFIG_SANDBOX) += clk_sandbox.o
> +obj-$(CONFIG_MACH_PIC32) += clk_pic32.o
> diff --git a/drivers/clk/clk_pic32.c b/drivers/clk/clk_pic32.c
> new file mode 100644
> index 0000000..bb0a1cf
> --- /dev/null
> +++ b/drivers/clk/clk_pic32.c
> @@ -0,0 +1,433 @@
> +/*
> + * Copyright (C) 2015 Purna Chandra Mandal <
> purna.mandal at microchip.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + *
> + */
> +
> +#include <common.h>
> +#include <clk.h>
> +#include <dm.h>
> +#include <div64.h>
> +#include <wait_bit.h>
> +#include <dm/lists.h>
> +#include <asm/io.h>
> +#include <mach/pic32.h>
> +#include <dt-bindings/clock/microchip,clock.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/* Primary oscillator */
> +#define SYS_POSC_CLK_HZ 24000000
> +
> +/* FRC clk rate */
> +#define SYS_FRC_CLK_HZ 8000000
> +
> +/* Clock Registers */
> +#define OSCCON 0x0000
> +#define OSCTUNE 0x0010
> +#define SPLLCON 0x0020
> +#define REFO1CON 0x0080
> +#define REFO1TRIM 0x0090
> +#define PB1DIV 0x0140
> +
> +/* SPLL */
> +#define ICLK_MASK 0x00000080
> +#define PLLIDIV_MASK 0x00000007
> +#define PLLODIV_MASK 0x00000007
> +#define CUROSC_MASK 0x00000007
> +#define PLLMUL_MASK 0x0000007F
> +#define FRCDIV_MASK 0x00000007
> +
> +/* PBCLK */
> +#define PBDIV_MASK 0x00000007
> +
> +/* SYSCLK MUX */
> +#define SCLK_SRC_FRC1 0
> +#define SCLK_SRC_SPLL 1
> +#define SCLK_SRC_POSC 2
> +#define SCLK_SRC_FRC2 7
> +
> +/* Reference Oscillator Control Reg fields */
> +#define REFO_SEL_MASK 0x0f
> +#define REFO_SEL_SHIFT 0
> +#define REFO_ACTIVE BIT(8)
> +#define REFO_DIVSW_EN BIT(9)
> +#define REFO_OE BIT(12)
> +#define REFO_ON BIT(15)
> +#define REFO_DIV_SHIFT 16
> +#define REFO_DIV_MASK 0x7fff
> +
> +/* Reference Oscillator Trim Register Fields */
> +#define REFO_TRIM_REG 0x10
> +#define REFO_TRIM_MASK 0x1ff
> +#define REFO_TRIM_SHIFT 23
> +#define REFO_TRIM_MAX 511
> +
> +#define ROCLK_SRC_SCLK 0x0
> +#define ROCLK_SRC_SPLL 0x7
> +#define ROCLK_SRC_ROCLKI 0x8
> +
> +/* Memory PLL */
> +#define MPLL_IDIV 0x3f
> +#define MPLL_MULT 0xff
> +#define MPLL_ODIV1 0x7
> +#define MPLL_ODIV2 0x7
> +#define MPLL_VREG_RDY BIT(23)
> +#define MPLL_RDY BIT(31)
> +#define MPLL_IDIV_SHIFT 0
> +#define MPLL_MULT_SHIFT 8
> +#define MPLL_ODIV1_SHIFT 24
> +#define MPLL_ODIV2_SHIFT 27
> +#define MPLL_IDIV_INIT 0x03
> +#define MPLL_MULT_INIT 0x32
> +#define MPLL_ODIV1_INIT 0x02
> +#define MPLL_ODIV2_INIT 0x01
> +
> +struct pic32_clk_priv {
> + void __iomem *iobase;
> + void __iomem *syscfg_base;
> +};
> +
> +static ulong pic32_get_pll_rate(struct pic32_clk_priv *priv)
> +{
> + u32 iclk, idiv, odiv, mult;
> + ulong plliclk, v;
> +
> + v = readl(priv->iobase + SPLLCON);
> + iclk = (v & ICLK_MASK);
> + idiv = ((v >> 8) & PLLIDIV_MASK) + 1;
> + odiv = ((v >> 24) & PLLODIV_MASK);
> + mult = ((v >> 16) & PLLMUL_MASK) + 1;
> +
> + plliclk = iclk ? SYS_FRC_CLK_HZ : SYS_POSC_CLK_HZ;
> +
> + if (odiv < 2)
> + odiv = 2;
> + else if (odiv < 5)
> + odiv = (1 << odiv);
> + else
> + odiv = 32;
> +
> + return ((plliclk / idiv) * mult) / odiv;
> +}
> +
> +static ulong pic32_get_sysclk(struct pic32_clk_priv *priv)
> +{
> + ulong v;
> + ulong hz;
> + ulong div, frcdiv;
> + ulong curr_osc;
> +
> + /* get clk source */
> + v = readl(priv->iobase + OSCCON);
> + curr_osc = (v >> 12) & CUROSC_MASK;
> + switch (curr_osc) {
> + case SCLK_SRC_FRC1:
> + case SCLK_SRC_FRC2:
> + frcdiv = ((v >> 24) & FRCDIV_MASK);
> + div = ((1 << frcdiv) + 1) + (128 * (frcdiv == 7));
> + hz = SYS_FRC_CLK_HZ / div;
> + break;
> +
> + case SCLK_SRC_SPLL:
> + hz = pic32_get_pll_rate(priv);
> + break;
> +
> + case SCLK_SRC_POSC:
> + hz = SYS_POSC_CLK_HZ;
> + break;
> +
> + default:
> + hz = 0;
> + printf("clk: unknown sclk_src.\n");
> + break;
> + }
> +
> + return hz;
> +}
> +
> +static ulong pic32_get_pbclk(struct pic32_clk_priv *priv, int
> periph)
> +{
> + void __iomem *reg;
> + ulong div, clk_freq;
> +
> + WARN_ON((periph < PB1CLK) || (periph > PB7CLK));
> +
> + clk_freq = pic32_get_sysclk(priv);
> +
> + reg = priv->iobase + PB1DIV + (periph - PB1CLK) * 0x10;
> + div = (readl(reg) & PBDIV_MASK) + 1;
> +
> + return clk_freq / div;
> +}
> +
> +static ulong pic32_get_cpuclk(struct pic32_clk_priv *priv)
> +{
> + return pic32_get_pbclk(priv, PB7CLK);
> +}
> +
> +static ulong pic32_set_refclk(struct pic32_clk_priv *priv, int
> periph,
> + int parent_rate, int rate, int
> parent_id)
> +{
> + void __iomem *reg;
> + u32 div, trim, v;
> + u64 frac;
> +
> + WARN_ON((periph < REF1CLK) || (periph > REF5CLK));
> +
> + /* calculate dividers,
> + * rate = parent_rate / [2 * (div + (trim / 512))]
> + */
> + if (parent_rate <= rate) {
> + div = 0;
> + trim = 0;
> + } else {
> + div = parent_rate / (rate << 1);
> + frac = parent_rate;
> + frac <<= 8;
> + do_div(frac, rate);
> + frac -= (u64)(div << 9);
> + trim = (frac >= REFO_TRIM_MAX) ? REFO_TRIM_MAX :
> (u32)frac;
> + }
> +
> + reg = priv->iobase + REFO1CON + (periph - REF1CLK) * 0x20;
> +
> + /* disable clk */
> + writel(REFO_ON | REFO_OE, reg + _CLR_OFFSET);
> +
> + /* wait till previous src change is active */
> + wait_for_bit(__func__, reg, REFO_DIVSW_EN | REFO_ACTIVE,
> + false, CONFIG_SYS_HZ, false);
> +
> + /* parent_id */
> + v = readl(reg);
> + v &= ~(REFO_SEL_MASK << REFO_SEL_SHIFT);
> + v |= (parent_id << REFO_SEL_SHIFT);
> +
> + /* apply rodiv */
> + v &= ~(REFO_DIV_MASK << REFO_DIV_SHIFT);
> + v |= (div << REFO_DIV_SHIFT);
> + writel(v, reg);
> +
> + /* apply trim */
> + v = readl(reg + REFO_TRIM_REG);
> + v &= ~(REFO_TRIM_MASK << REFO_TRIM_SHIFT);
> + v |= (trim << REFO_TRIM_SHIFT);
> + writel(v, reg + REFO_TRIM_REG);
> +
> + /* enable clk */
> + writel(REFO_ON | REFO_OE, reg + _SET_OFFSET);
> +
> + /* switch divider */
> + writel(REFO_DIVSW_EN, reg + _SET_OFFSET);
> +
> + /* wait for divider switching to complete */
> + return wait_for_bit(__func__, reg, REFO_DIVSW_EN, false,
> + CONFIG_SYS_HZ, false);
> +}
> +
> +static ulong pic32_get_refclk(struct pic32_clk_priv *priv, int
> periph)
> +{
> + u32 rodiv, rotrim, rosel, v, parent_rate;
> + void __iomem *reg;
> + u64 rate64;
> +
> + WARN_ON((periph < REF1CLK) || (periph > REF5CLK));
> +
> + reg = priv->iobase + REFO1CON + (periph - REF1CLK) * 0x20;
> + v = readl(reg);
> + /* get rosel */
> + rosel = (v >> REFO_SEL_SHIFT) & REFO_SEL_MASK;
> + /* get div */
> + rodiv = (v >> REFO_DIV_SHIFT) & REFO_DIV_MASK;
> +
> + /* get trim */
> + v = readl(reg + REFO_TRIM_REG);
> + rotrim = (v >> REFO_TRIM_SHIFT) & REFO_TRIM_MASK;
> +
> + if (!rodiv)
> + return 0;
> +
> + /* get parent rate */
> + switch (rosel) {
> + case ROCLK_SRC_SCLK:
> + parent_rate = pic32_get_cpuclk(priv);
> + break;
> + case ROCLK_SRC_SPLL:
> + parent_rate = pic32_get_pll_rate(priv);
> + break;
> + default:
> + parent_rate = 0;
> + break;
> + }
> +
> + /* Calculation
> + * rate = parent_rate / [2 * (div + (trim / 512))]
> + */
> + if (rotrim) {
> + rodiv <<= 9;
> + rodiv += rotrim;
> + rate64 = parent_rate;
> + rate64 <<= 8;
> + do_div(rate64, rodiv);
> + v = (u32)rate64;
> + } else {
> + v = parent_rate / (rodiv << 1);
> + }
> + return v;
> +}
> +
> +static ulong pic32_get_mpll_rate(struct pic32_clk_priv *priv)
> +{
> + u32 v, idiv, mul;
> + u32 odiv1, odiv2;
> + u64 rate;
> +
> + v = readl(priv->syscfg_base + CFGMPLL);
> + idiv = v & MPLL_IDIV;
> + mul = (v >> MPLL_MULT_SHIFT) & MPLL_MULT;
> + odiv1 = (v >> MPLL_ODIV1_SHIFT) & MPLL_ODIV1;
> + odiv2 = (v >> MPLL_ODIV2_SHIFT) & MPLL_ODIV2;
> +
> + rate = (SYS_POSC_CLK_HZ / idiv) * mul;
> + do_div(rate, odiv1);
> + do_div(rate, odiv2);
> +
> + return (ulong)rate;
> +}
> +
> +static int pic32_mpll_init(struct pic32_clk_priv *priv)
> +{
> + u32 v, mask;
> +
> + /* initialize */
> + v = (MPLL_IDIV_INIT << MPLL_IDIV_SHIFT) |
> + (MPLL_MULT_INIT << MPLL_MULT_SHIFT) |
> + (MPLL_ODIV1_INIT << MPLL_ODIV1_SHIFT) |
> + (MPLL_ODIV2_INIT << MPLL_ODIV2_SHIFT);
> +
> + writel(v, priv->syscfg_base + CFGMPLL);
> +
> + /* Wait for ready */
> + mask = MPLL_RDY | MPLL_VREG_RDY;
> + return wait_for_bit(__func__, priv->syscfg_base + CFGMPLL,
> mask,
> + true, get_tbclk(), false);
> +}
> +
> +static void pic32_clk_init(struct udevice *dev)
> +{
> + const void *blob = gd->fdt_blob;
> + struct pic32_clk_priv *priv;
> + ulong rate, pll_hz;
> + char propname[50];
> + int i;
> +
> + priv = dev_get_priv(dev);
> + pll_hz = pic32_get_pll_rate(priv);
> +
> + /* Initialize REFOs as not initialized and enabled on reset.
> */
> + for (i = REF1CLK; i <= REF5CLK; i++) {
> + snprintf(propname, sizeof(propname),
> + "microchip,refo%d-frequency", i - REF1CLK +
> 1);
> + rate = fdtdec_get_int(blob, dev->of_offset,
> propname, 0);
> + if (rate)
> + pic32_set_refclk(priv, i, pll_hz, rate,
> ROCLK_SRC_SPLL);
> + }
> +
> + /* Memory PLL */
> + pic32_mpll_init(priv);
> +}
> +
> +static ulong pic32_clk_get_rate(struct udevice *dev)
> +{
> + struct pic32_clk_priv *priv = dev_get_priv(dev);
> +
> + return pic32_get_cpuclk(priv);
> +}
> +
> +static ulong pic32_get_periph_rate(struct udevice *dev, int periph)
> +{
> + struct pic32_clk_priv *priv = dev_get_priv(dev);
> + ulong rate;
> +
> + switch (periph) {
> + case PB1CLK ... PB7CLK:
> + rate = pic32_get_pbclk(priv, periph);
> + break;
> + case REF1CLK ... REF5CLK:
> + rate = pic32_get_refclk(priv, periph);
> + break;
> + case PLLCLK:
> + rate = pic32_get_pll_rate(priv);
> + break;
> + case MPLL:
> + rate = pic32_get_mpll_rate(priv);
> + break;
> + default:
> + rate = 0;
> + break;
> + }
> +
> + return rate;
> +}
> +
> +static ulong pic32_set_periph_rate(struct udevice *dev, int periph,
> ulong rate)
> +{
> + struct pic32_clk_priv *priv = dev_get_priv(dev);
> + ulong pll_hz;
> +
> + switch (periph) {
> + case REF1CLK ... REF5CLK:
> + pll_hz = pic32_get_pll_rate(priv);
> + pic32_set_refclk(priv, periph, pll_hz, rate,
> ROCLK_SRC_SPLL);
> + break;
> + default:
> + break;
> + }
> +
> + return rate;
> +}
> +
> +static struct clk_ops pic32_pic32_clk_ops = {
> + .get_rate = pic32_clk_get_rate,
> + .set_periph_rate = pic32_set_periph_rate,
> + .get_periph_rate = pic32_get_periph_rate,
> +};
> +
> +static int pic32_clk_probe(struct udevice *dev)
> +{
> + struct pic32_clk_priv *priv = dev_get_priv(dev);
> + fdt_addr_t addr;
> + fdt_size_t size;
> +
> + addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset,
> "reg", &size);
> + if (addr == FDT_ADDR_T_NONE)
> + return -EINVAL;
> +
> + priv->iobase = ioremap(addr, size);
> + if (!priv->iobase)
> + return -EINVAL;
you can drop this check. ioremap() always returns a mapped address
> +
> + priv->syscfg_base = pic32_get_syscfg_base();
> +
> + /* initialize clocks */
> + pic32_clk_init(dev);
> +
> + return 0;
> +}
> +
> +static const struct udevice_id pic32_clk_ids[] = {
> + { .compatible = "microchip,pic32mzda_clk"},
> + {}
> +};
> +
> +U_BOOT_DRIVER(pic32_clk) = {
> + .name = "pic32_clk",
> + .id = UCLASS_CLK,
> + .of_match = pic32_clk_ids,
> + .flags = DM_FLAG_PRE_RELOC,
> + .ops = &pic32_pic32_clk_ops,
> + .probe = pic32_clk_probe,
> + .priv_auto_alloc_size = sizeof(struct pic32_clk_priv),
> +};
> diff --git a/include/dt-bindings/clock/microchip,clock.h b/include/dt
> -bindings/clock/microchip,clock.h
> new file mode 100644
> index 0000000..93c222d
> --- /dev/null
> +++ b/include/dt-bindings/clock/microchip,clock.h
> @@ -0,0 +1,29 @@
> +/*
> + * (c) 2015 Purna Chandra Mandal <purna.mandal at microchip.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + *
> + */
> +
> +#ifndef __CLK_MICROCHIP_PIC32
> +#define __CLK_MICROCHIP_PIC32
> +
> +/* clock output indices */
> +#define BASECLK 0
> +#define PLLCLK 1
> +#define MPLL 2
> +#define SYSCLK 3
> +#define PB1CLK 4
> +#define PB2CLK 5
> +#define PB3CLK 6
> +#define PB4CLK 7
> +#define PB5CLK 8
> +#define PB6CLK 9
> +#define PB7CLK 10
> +#define REF1CLK 11
> +#define REF2CLK 12
> +#define REF3CLK 13
> +#define REF4CLK 14
> +#define REF5CLK 15
> +
> +#endif /* __CLK_MICROCHIP_PIC32 */
--
- Daniel
More information about the U-Boot
mailing list