[U-Boot] [PATCH v3 05/14] drivers: gpio: add driver for Microchip PIC32 GPIO controller.

Daniel Schwierzeck daniel.schwierzeck at gmail.com
Wed Jan 13 14:46:05 CET 2016


Am Dienstag, den 12.01.2016, 15:48 +0530 schrieb Purna Chandra Mandal:
> In PIC32 GPIO controller is part of PIC32 pin controller.
> PIC32 has ten independently programmable ports and each with multiple
> pins.
> Each of these pins can be configured and used as GPIO, provided they
> are not in use for other peripherals.
> 
> Signed-off-by: Purna Chandra Mandal <purna.mandal at microchip.com>

Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>

nits below

> 
> ---
> 
> Changes in v3:
> - add check on dev_get_addr()
> 
> Changes in v2: None
> 
>  drivers/gpio/Kconfig      |   7 ++
>  drivers/gpio/Makefile     |   2 +-
>  drivers/gpio/pic32_gpio.c | 175
> ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 183 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/gpio/pic32_gpio.c
> 
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index e60e9fd..13e9a6a 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -83,4 +83,11 @@ config VYBRID_GPIO
>  	help
>  	  Say yes here to support Vybrid vf610 GPIOs.
>  
> +config PIC32_GPIO
> +	bool "Microchip PIC32 GPIO driver"
> +	depends on DM_GPIO
> +	default y if MACH_PIC32
> +	help
> +	  Say yes here to support Microchip PIC32 GPIOs.
> +
>  endmenu
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index fb4fd25..845a6d4 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -46,4 +46,4 @@ obj-$(CONFIG_STM32_GPIO)	+= stm32_gpio.o
>  obj-$(CONFIG_ZYNQ_GPIO)		+= zynq_gpio.o
>  obj-$(CONFIG_VYBRID_GPIO)	+= vybrid_gpio.o
>  obj-$(CONFIG_HIKEY_GPIO)	+= hi6220_gpio.o
> -
> +obj-$(CONFIG_PIC32_GPIO)	+= pic32_gpio.o
> diff --git a/drivers/gpio/pic32_gpio.c b/drivers/gpio/pic32_gpio.c
> new file mode 100644
> index 0000000..5b23af4
> --- /dev/null
> +++ b/drivers/gpio/pic32_gpio.c
> @@ -0,0 +1,175 @@
> +/*
> + * Copyright (c) 2015 Microchip Technology Inc
> + * Purna Chandra Mandal <purna.mandal at microchip.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <malloc.h>
> +#include <asm/io.h>
> +#include <asm/gpio.h>
> +#include <linux/compat.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <mach/pic32.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/* Peripheral Pin Control */
> +struct pic32_reg_port {
> +	struct pic32_reg_atomic ansel;
> +	struct pic32_reg_atomic tris;
> +	struct pic32_reg_atomic port;
> +	struct pic32_reg_atomic lat;
> +	struct pic32_reg_atomic open_drain;
> +	struct pic32_reg_atomic cnpu;
> +	struct pic32_reg_atomic cnpd;
> +	struct pic32_reg_atomic cncon;
> +};
> +
> +enum {
> +	MICROCHIP_GPIO_DIR_OUT,
> +	MICROCHIP_GPIO_DIR_IN,
> +	MICROCHIP_GPIOS_PER_BANK = 16,
> +};
> +
> +struct pic32_gpio_priv {
> +	struct pic32_reg_port *regs;
> +	char name[2];
> +};
> +
> +static int pic32_gpio_get_value(struct udevice *dev, unsigned
> offset)
> +{
> +	struct pic32_gpio_priv *priv = dev_get_priv(dev);
> +
> +	return !!(readl(&priv->regs->port.raw) & BIT(offset));
> +}
> +
> +static int pic32_gpio_set_value(struct udevice *dev, unsigned
> offset,
> +				int value)
> +{
> +	struct pic32_gpio_priv *priv = dev_get_priv(dev);
> +	int mask = BIT(offset);
> +
> +	if (value)
> +		writel(mask, &priv->regs->port.set);
> +	else
> +		writel(mask, &priv->regs->port.clr);
> +
> +	return 0;
> +}
> +
> +static int pic32_gpio_direction(struct udevice *dev, unsigned
> offset)
> +{
> +	struct pic32_gpio_priv *priv = dev_get_priv(dev);
> +
> +	if (readl(&priv->regs->ansel.raw) & BIT(offset))
> +		return -1;
> +
> +	if (readl(&priv->regs->tris.raw) & BIT(offset))
> +		return MICROCHIP_GPIO_DIR_IN;
> +	else
> +		return MICROCHIP_GPIO_DIR_OUT;
> +}
> +
> +static int pic32_gpio_direction_input(struct udevice *dev, unsigned
> offset)
> +{
> +	struct pic32_gpio_priv *priv = dev_get_priv(dev);
> +	int mask = BIT(offset);
> +
> +	writel(mask, &priv->regs->ansel.clr);
> +	writel(mask, &priv->regs->tris.set);
> +
> +	return 0;
> +}
> +
> +static int pic32_gpio_direction_output(struct udevice *dev,
> +				       unsigned offset, int value)
> +{
> +	struct pic32_gpio_priv *priv = dev_get_priv(dev);
> +	int mask = BIT(offset);
> +
> +	writel(mask, &priv->regs->ansel.clr);
> +	writel(mask, &priv->regs->tris.clr);
> +
> +	pic32_gpio_set_value(dev, offset, value);
> +	return 0;
> +}
> +
> +static int pic32_gpio_xlate(struct udevice *dev, struct gpio_desc
> *desc,
> +			    struct fdtdec_phandle_args *args)
> +{
> +	desc->offset = args->args[0];
> +	desc->flags = args->args[1] & GPIO_ACTIVE_LOW ?
> GPIOD_ACTIVE_LOW : 0;
> +
> +	return 0;
> +}
> +
> +static int pic32_gpio_get_function(struct udevice *dev, unsigned
> offset)
> +{
> +	int ret = GPIOF_UNUSED;
> +
> +	switch (pic32_gpio_direction(dev, offset)) {
> +	case MICROCHIP_GPIO_DIR_OUT:
> +		ret = GPIOF_OUTPUT;
> +		break;
> +	case MICROCHIP_GPIO_DIR_IN:
> +		ret = GPIOF_INPUT;
> +		break;
> +	default:
> +		ret = GPIOF_UNUSED;
> +		break;
> +	}
> +	return ret;
> +}
> +
> +static const struct dm_gpio_ops gpio_pic32_ops = {
> +	.direction_input	= pic32_gpio_direction_input,
> +	.direction_output	= pic32_gpio_direction_output,
> +	.get_value		= pic32_gpio_get_value,
> +	.set_value		= pic32_gpio_set_value,
> +	.get_function		= pic32_gpio_get_function,
> +	.xlate			= pic32_gpio_xlate,
> +};
> +
> +static int pic32_gpio_probe(struct udevice *dev)
> +{
> +	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
> +	struct pic32_gpio_priv *priv = dev_get_priv(dev);
> +	fdt_addr_t addr;
> +	fdt_size_t size;
> +	char *end;
> +	int bank;
> +
> +	addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset,
> "reg", &size);
> +	if (addr == FDT_ADDR_T_NONE)
> +		return -EINVAL;
> +
> +	priv->regs = ioremap(addr, size);
> +	if (!priv->regs)
> +		return -EINVAL;

you can drop this check. ioremap() always returns a mapped address.

> +
> +	uc_priv->gpio_count = MICROCHIP_GPIOS_PER_BANK;
> +	end = strrchr(dev->name, '@');
> +	bank = trailing_strtoln(dev->name, end);
> +	priv->name[0] = 'A' + bank;
> +	uc_priv->bank_name = priv->name;
> +
> +	return 0;
> +}
> +
> +static const struct udevice_id pic32_gpio_ids[] = {
> +	{ .compatible = "microchip,pic32mzda-gpio" },
> +	{ }
> +};
> +
> +U_BOOT_DRIVER(gpio_pic32) = {
> +	.name		= "gpio_pic32",
> +	.id		= UCLASS_GPIO,
> +	.of_match	= pic32_gpio_ids,
> +	.ops		= &gpio_pic32_ops,
> +	.probe		= pic32_gpio_probe,
> +	.priv_auto_alloc_size	= sizeof(struct
> pic32_gpio_priv),
> +};
-- 
- Daniel



More information about the U-Boot mailing list