[U-Boot] [PATCH 13/50] rockchip: Use pwrseq for MMC start-up on jerry
Simon Glass
sjg at chromium.org
Thu Jan 14 00:25:03 CET 2016
This is defined in the device tree in Linux. Copy over the settings so that
this can be used instead of hard-coding the reset line.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/dts/rk3288-veyron.dtsi | 15 +++++++++++----
configs/chromebook_jerry_defconfig | 1 +
include/configs/rk3288_common.h | 1 +
3 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi
index 7e37158..12404ff 100644
--- a/arch/arm/dts/rk3288-veyron.dtsi
+++ b/arch/arm/dts/rk3288-veyron.dtsi
@@ -106,6 +106,13 @@
priority = /bits/ 8 <200>;
};
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+ };
+
sound {
compatible = "rockchip,rockchip-audio-max98090";
rockchip,model = "ROCKCHIP-I2S";
@@ -259,11 +266,12 @@
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
+ mmc-pwrseq = <&emmc_pwrseq>;
disable-wp;
non-removable;
num-slots = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_deassert_reset>;
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_pwr>;
status = "okay";
};
@@ -671,9 +679,8 @@
};
emmc {
- /* Make sure eMMC is not in reset */
- emmc_deassert_reset: emmc-deassert-reset {
- rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>;
+ emmc_reset: emmc-reset {
+ rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
};
/*
diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig
index 39cd9d6..456b6ea 100644
--- a/configs/chromebook_jerry_defconfig
+++ b/configs/chromebook_jerry_defconfig
@@ -23,6 +23,7 @@ CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_LED=y
CONFIG_SPL_LED=y
CONFIG_LED_GPIO=y
+CONFIG_PWRSEQ=y
CONFIG_RESET=y
CONFIG_DM_MMC=y
CONFIG_ROCKCHIP_DWMMC=y
diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index 238711a..f47573b 100644
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -26,6 +26,7 @@
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
--
2.6.0.rc2.230.g3dd15c0
More information about the U-Boot
mailing list