[U-Boot] [PATCH 40/50] rockchip: spi: Remember the last speed to avoid re-setting it

[Simon Glass]

Rather than changing the clock to the same value on every transaction,
remember the last value and don't adjust the clock unless it is necessary.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 drivers/spi/rk_spi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/rk_spi.c b/drivers/spi/rk_spi.c
index f98284c..7b4a04c 100644
--- a/drivers/spi/rk_spi.c
+++ b/drivers/spi/rk_spi.c
@@ -44,6 +44,7 @@ struct rockchip_spi_priv {
 	u8 bits_per_word;		/* max 16 bits per word */
 	u8 n_bytes;
 	unsigned int speed_hz;
+	unsigned int last_speed_hz;
 	unsigned int tmode;
 	uint input_rate;
 };
@@ -82,6 +83,7 @@ static void rkspi_set_clk(struct rockchip_spi_priv *priv, uint speed)
 	debug("spi speed %u, div %u\n", speed, clk_div);
 
 	writel(clk_div, &priv->regs->baudr);
+	priv->last_speed_hz = speed;
 }
 
 static int rkspi_wait_till_not_busy(struct rockchip_spi *regs)
@@ -211,7 +213,8 @@ static int rockchip_spi_claim_bus(struct udevice *dev)
 		return -EPROTONOSUPPORT;
 	}
 
-	rkspi_set_clk(priv, priv->speed_hz);
+	if (priv->speed_hz != priv->last_speed_hz)
+		rkspi_set_clk(priv, priv->speed_hz);
 
 	/* Operation Mode */
 	ctrlr0 = OMOD_MASTER << OMOD_SHIFT;
-- 
2.6.0.rc2.230.g3dd15c0