[U-Boot] [PATCH 2/2] sunxi: Add support for the I2C controller which is part of the PRCM
Hans de Goede
hdegoede at redhat.com
Thu Jan 14 14:06:26 CET 2016
From: Jelle van der Waa <jelle at vdwaa.nl>
Signed-off-by: Jelle van der Waa <jelle at vdwaa.nl>
[hdegoede at redhat.com: Minor cleanups]
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
arch/arm/cpu/armv7/sunxi/clock_sun6i.c | 10 ++++++++++
arch/arm/cpu/armv7/sunxi/prcm.c | 12 ++++++++++++
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 1 +
arch/arm/include/asm/arch-sunxi/gpio.h | 2 ++
arch/arm/include/asm/arch-sunxi/i2c.h | 3 +++
arch/arm/include/asm/arch-sunxi/prcm.h | 2 ++
board/sunxi/Kconfig | 6 ++++++
board/sunxi/board.c | 6 ++++++
configs/orangepi_pc_defconfig | 1 +
drivers/i2c/mvtwsi.c | 11 +++++++++++
include/configs/sunxi-common.h | 2 +-
11 files changed, 55 insertions(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
index 4501884..1da5455 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
@@ -77,6 +77,16 @@ int clock_twi_onoff(int port, int state)
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ if (port == 5) {
+ if (state)
+ prcm_apb0_enable(
+ PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
+ else
+ prcm_apb0_disable(
+ PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_I2C);
+ return 0;
+ }
+
/* set the apb clock gate for twi */
if (state)
setbits_le32(&ccm->apb2_gate,
diff --git a/arch/arm/cpu/armv7/sunxi/prcm.c b/arch/arm/cpu/armv7/sunxi/prcm.c
index 19b4938..e1d091f 100644
--- a/arch/arm/cpu/armv7/sunxi/prcm.c
+++ b/arch/arm/cpu/armv7/sunxi/prcm.c
@@ -33,3 +33,15 @@ void prcm_apb0_enable(u32 flags)
/* deassert reset for module */
setbits_le32(&prcm->apb0_reset, flags);
}
+
+void prcm_apb0_disable(u32 flags)
+{
+ struct sunxi_prcm_reg *prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+ /* assert reset for module */
+ clrbits_le32(&prcm->apb0_reset, flags);
+
+ /* close the clock for module */
+ clrbits_le32(&prcm->apb0_gate, flags);
+}
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index 63b161a..0cdefdc 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -134,6 +134,7 @@
#define SUNXI_RTC_BASE 0x01f00000
#define SUNXI_PRCM_BASE 0x01f01400
#define SUN6I_CPUCFG_BASE 0x01f01c00
+#define SUNXI_R_TWI_BASE 0x01f02400
#define SUNXI_R_UART_BASE 0x01f02800
#define SUNXI_R_PIO_BASE 0x01f02c00
#define SUN6I_P2WI_BASE 0x01f03400
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index a2a9a38..0eca859 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -199,6 +199,8 @@ enum sunxi_gpio_number {
#define SUN6I_GPL1_R_P2WI_SDA 3
#define SUN8I_GPL_R_RSB 2
+#define SUN8I_H3_GPL_R_TWI 2
+#define SUN8I_A23_GPL_R_TWI 3
#define SUN8I_GPL_R_UART 2
#define SUN9I_GPN_R_RSB 3
diff --git a/arch/arm/include/asm/arch-sunxi/i2c.h b/arch/arm/include/asm/arch-sunxi/i2c.h
index 561cd2b..4dfd313 100644
--- a/arch/arm/include/asm/arch-sunxi/i2c.h
+++ b/arch/arm/include/asm/arch-sunxi/i2c.h
@@ -23,6 +23,9 @@
#ifdef CONFIG_I2C4_ENABLE
#define CONFIG_I2C_MVTWSI_BASE4 SUNXI_TWI4_BASE
#endif
+#ifdef CONFIG_R_I2C_ENABLE
+#define CONFIG_I2C_MVTWSI_BASE5 SUNXI_R_TWI_BASE
+#endif
/* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */
#define CONFIG_SYS_TCLK 24000000
diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h
index 82ed541..556c1af 100644
--- a/arch/arm/include/asm/arch-sunxi/prcm.h
+++ b/arch/arm/include/asm/arch-sunxi/prcm.h
@@ -236,5 +236,7 @@ struct sunxi_prcm_reg {
};
void prcm_apb0_enable(u32 flags);
+void prcm_apb0_disable(u32 flags);
+
#endif /* __ASSEMBLY__ */
#endif /* _PRCM_H */
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 9d67847..7c69be9 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -363,6 +363,12 @@ config I2C3_ENABLE
See I2C0_ENABLE help text.
endif
+config R_I2C_ENABLE
+ bool "Enable the PRCM I2C/TWI controller"
+ default n
+ ---help---
+ Set this to y to enable the I2C controller which is part of the PRCM.
+
if MACH_SUN7I
config I2C4_ENABLE
bool "Enable I2C/TWI controller 4"
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 386e2e0..1cc39e4 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -422,6 +422,12 @@ void i2c_init_board(void)
clock_twi_onoff(4, 1);
#endif
#endif
+
+#ifdef CONFIG_R_I2C_ENABLE
+ clock_twi_onoff(5, 1);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_H3_GPL_R_TWI);
+#endif
}
#ifdef CONFIG_SPL_BUILD
diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig
index 358caa5..ea9ed87 100644
--- a/configs/orangepi_pc_defconfig
+++ b/configs/orangepi_pc_defconfig
@@ -12,3 +12,4 @@ CONFIG_SPL=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
+CONFIG_R_I2C_ENABLE=y
diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c
index 698bfc1..b5304d8 100644
--- a/drivers/i2c/mvtwsi.c
+++ b/drivers/i2c/mvtwsi.c
@@ -128,6 +128,10 @@ static struct mvtwsi_registers *twsi_get_base(struct i2c_adapter *adap)
case 4:
return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE4;
#endif
+#ifdef CONFIG_I2C_MVTWSI_BASE5
+ case 5:
+ return (struct mvtwsi_registers *) CONFIG_I2C_MVTWSI_BASE5;
+#endif
default:
printf("Missing mvtwsi controller %d base\n", adap->hwadapnr);
break;
@@ -486,3 +490,10 @@ U_BOOT_I2C_ADAP_COMPLETE(twsi4, twsi_i2c_init, twsi_i2c_probe,
CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 4)
#endif
+#ifdef CONFIG_I2C_MVTWSI_BASE5
+U_BOOT_I2C_ADAP_COMPLETE(twsi5, twsi_i2c_init, twsi_i2c_probe,
+ twsi_i2c_read, twsi_i2c_write,
+ twsi_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 5)
+
+#endif
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 790e704..b4dfb3c 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -212,7 +212,7 @@
#if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
defined CONFIG_I2C2_ENABLE || defined CONFIG_I2C3_ENABLE || \
- defined CONFIG_I2C4_ENABLE
+ defined CONFIG_I2C4_ENABLE || defined CONFIG_R_I2C_ENABLE
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MVTWSI
#define CONFIG_SYS_I2C_SPEED 400000
--
2.5.0
More information about the U-Boot
mailing list